Electric motor 2.2 kW 950 Rpm

MEZ 1AP112M-6s

Condition: new, Year of construction: 2023, Power (KVA): 650 Pjdowpgh Hspfx Anzegp

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Pgedpfjw S Tyajx Anzjp

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Podpfxoxlcufs Anzogp Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Pgodpfx Aopqxnxenzsp

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm Pgsdpfxoqpdi Uo Anzjp with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: reconditioned (used), Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. Control Memory Funktion 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: Pgedpfjwugpbox Anzjp ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory fun...

Condition: used, Year of construction: 2004, Planer and moulder Weinig Powermat 2000 PowerLock - Technical data Working width 30 - 300 mm Working height 19 - 200 mm First lower tool holder Motor with brake 18.5 KW Speed 8000 rpm Tool flight circle 125 - 180 Pgedpfx Aeunbrbenzsp 2nd tool holder First right tool holder Motor with brake 15 KW Tool flight circle 93 - 200 3rd tool holder First left-hand tool holder Motor with brake 15 KW Tool flight circle 93 - 200 mm 4th tool holder First upper tool holder Motor with brake 37 KW Tool flight circle 93 - 200 5th tool holder Second lower tool holder Motor with brake 22 KW PowerLock tool holder Speed 8000 rpm Tool flight circle 93 - 225 Feed system Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Condition: good (used), Tires, tractor tires, soil cultivation, seed drill -Quantity: 2 tires Pgsdpfxob A Rtro Anzop -Tire size: 180/90-16 IMP -Dimensions: Ø 700 mm -Total price: for 2 tires -Weight: 40 kg/piece

Condition: excellent (used), functionality: fully functional, Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Top 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Pgjdpjvcbr Iefx Anzop Universal 7.5kw 7000r.p.m Automatic height and width adjustment Automatic tabletop lubrication pump Powered rollers in worktop (1 grooved roller for wet wood) Push speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Condition: used, Hydroplaner heads used 2 pcs. 145 x 160 x 50 2 pcs. 160 x 160 x 50 2 pcs. 175 x 160 x 50 2 pcs. 190 x 160 x 50 1 pc. 180 x 160 x 50 Podpfjixtxdjx Anzogp