Hydraulic Profile Steel Shear / Hole Punching
METALLKRAFT HPS 45 S

Name: METALLKRAFT HPS 45 S
Brand: METALLKRAFT
Availability: InStock

Condition

New

Location

Böblingen

Show map

Machine data

Machine type:: Hydraulic Profile Steel Shear / Hole Punching

Manufacturer:: METALLKRAFT

Model:: HPS 45 S

Condition:: new

Price & Location

Location:: Otto-Lilienthal-Straße 36, 71034 Böblingen, Deutschland

Call

Details about the offer

Listing ID:: A9085745

Update:: 26.03.2025

Description

Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045).
Combined machine with up to 5 processing stations and foot operation.

DESCRIPTION
- Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station
- DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear
- Stepless adjustment of the stroke
- Larger throat for punching station with 620 mm optional, from HPS 55DS available
- Heavy and stable welded construction
- From HPS 45S with notching knife as standard equipment
- With powerful 400 volt motor
- V-notching knife, oversized punching device and larger throat for punching station available on request
- Two-stage foot pedal for inching operation
- Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S)
Kjdjkzk Hvepfx Aa Eonf

Advantages of punching compared to drilling:
- High time saving - cycle times
- No chips
- No cooling

Notice:
All hydraulic section shears are supplied with oil

TECHNICAL DATA
Dimensions and weights
length (product) approx.: 1500mm
width/depth (product) approx.: 950mm
Height (product) approx.: 1680mm
Weight (net) approx.: 1400kg

Notching station
Notching station material thickness max.: 8mm
Notching width max.: 35mm
Notching depth max.: 75mm
V-notching tools (accessories): 100 x 100 x 8mm

Electrical data
Power drive motor: 4kW
Supply voltage: 400V
Mains frequency: 50Hz

Flat steel shear
Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm
flat steel shear blade length: 316mm
Flat steel shear angle cut 45° side length max. x thickness max:
80 x 10mm
Flat steel shear working height: 955mm

Punching station
Punching pressure: 45t
Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm
Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm
Punching station throat: 175mm
Punching station stroke max: 50mm
Punching station stroke rate: 20/min
Punching station working height: 955mm

Steel bar shear
Steel bar shear capacity round material: 30mm
Steel bar shear capacity square material: 25mm

Angle steel shear
Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm
Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm
Angle steel shear working height: 1140mm

SUPPLY
- Punching station
- Flat steel shears
- Angle steel shear
- Sectional steel shears with round and square blades
- notching station
- punch holder with bayonet lock
- punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60
- Punch, flat steel cutter and notcher with adjustable stops
- hook wrench
- foot pedal
- hydraulic oil

Made in Turkey

OTHER MODELS PLEASE REQUEST

The listing was translated automatically. Translation errors are possible.

Documents

9085745-01.pdf

Seller

Registered since: 2002

156 listings online

Call

Send inquiry

Telephone & Fax

+49 7033 ... show

These listings may also fit your interest.

Listing

Concordia Sagittaria

1,733 km

Punching press
SahinlerHKM 85

Call

Condition: new, Combined hydraulic shear with two independent pistons, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, double pedal board, centralized lubrication system, working light. Machine supplied with safety guards according to CE rules, CE conformity declaration, user manual. Power : Ton 85. Engine power : Kw 7.5 Dimensions : mm 1.920 x 950 x 2.040 ( L x W x H ). Weight: 2.315 Kg: 2.315 Kg PUNCHING : Punching capacity : mm Ø 33 x Thickness 20 mm. Recess depth: mm 355. Punching stroke : mm 80. Working height : mm 1.080. SHEARING : Plates : Knedsggbt Sopfx Aa Esf mm 380 x 20. mm 480 x 15. Length of blades : mm 482. Round bars : mm Ø 50. Square bars : mm 50. 90° corner profiles : 150 x 150 x 15 mm. Angle profiles at 45°: mm 80 x 8. SKIRTING : Max thickness : mm 13. Width : mm 52. Depth : mm 100. Working height : mm 940.

See details

Listing

Edge banding machine HOLZ-HER Sprint 1310-1 + PU

Spatenhof

1,818 km

Edge banding machine
HOLZ-HERSprint 1310-1 + PU

€4,000

fixed price plus VAT

Call

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works Knjdpfx Aaew Igg Se Eof

See details

Listing

WC Container, 143cm x 240cm x 240cm BS-Container WC1

Дортмунд

1,084 km

WC Container, 143cm x 240cm x 240cm
BS-ContainerWC1

€3,990

fixed price plus VAT

Call

Condition: new, Year of construction: 2023, standard equipment: 2x door 90cm x 200cm 2x windows 50cm x 50cm 2x toilet 2x sink 2x LEDs inside/outside 1x fuse box Kjdpfx Aomu Aqyea Eonf 1x 32A incl. EU power connection BS Containers have a high quality standard and are ISO 9001-2015 certified. The materials selected for the containers correspond to the specified EU standards. Our containers are particularly characterized by: High-quality materials Stable construction Premium insulation individual design Versatile uses

See details

Listing

Cutting-drilling line Kaltenbach HDM 143 Kaltenbach HDM1431

Balaguer

1,461 km

Cutting-drilling line Kaltenbach HDM 143
KaltenbachHDM1431

Call

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm Kjdpfx Aohzbipsa Eonf - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

See details

Listing

Hessisch Lichtenau

1,244 km

Combined profile steel shear and punch, notching machine, rectangular notcher, flat bar shear
GEKAHydracrop 80/A

€11,000

fixed price plus VAT

Call

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Kodpfx Aaerz Tute Eonf Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

See details

Listing

Lemmer

930 km

Steelworker Geka 70 Ton
GekaHYD70/S

Call

Condition: good (used), punching force: 70 t, Punchingpower: 70 Ton Punching capacity: Ø 28 in 20 mm steel Throat: 300 mm Cuttingcapacity: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flatsteel 45 mm round bars Notching: 100 x 13 mm Knjdpfx Aaouby Slo Eef Featured with: - Elektric stop 1000 mm - Various tooling and accesories - 2 Cylinder machine Country of origin: Spain Motor power: 7,5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

See details

Listing

Hydraulic swing frame metal band saw METALLKRAFT BMBS 220 x 250 H-G - sofort verfügbar -

Bitburg

1,087 km

Hydraulic swing frame metal band saw
METALLKRAFTBMBS 220 x 250 H-G - sofort verfügbar -

€2,990

fixed price plus VAT

Call

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Kjdpfxsg U Uv Rj Aa Ejnf Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

See details

Listing

Langwedel

1,156 km

Shear
PeddinghausPeddimax 1002

Call

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Ksdpfx Aajt Iklks Eonf Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

See details

Listing

Machining center DMG Deckel Maho DMU 100T

Kaniów

1,911 km

Machining center
DMG Deckel MahoDMU 100T

€34,900

ONO plus VAT

Call

Year of construction: 2000, condition: excellent (used), I have for sale a Deckel Maho DMU 100T machining center Control: Heidenhain MillPlus Technical condition of the machine - Very good Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" :1080mm "Y" axis travel: 710mm "Z" axis travel 710mm Torsion head Maximum spindle speed 12,000 rpm. Knjdpfxolffzco Aa Esf Tool storage: 32pcs(2x16 tools) High-pressure cooling Spindle cooling Heidenhain measuring scales on all axes Chip conveyor central lubrication hydraulic tool clamping Spindle taper SK40 Full programming manual Documentation Machine weight 10t. Included in the price loading Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also purchased by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools. Stal-Com Rafał Dziendziel

See details

Listing

Stuttgart

1,321 km

Laser Marking System
Penteq GmbHLG200

Call

Year of construction: 2025, condition: new, functionality: fully functional, The LG200 FunktionsModule laser system is a compact and user-friendly laser class 1 marker for marking different materials. Furthermore, the device can be expanded with a wide variety of modules as required and thus adapted to individual applications. Kedpfx Aaoctdfaj Eenf Features of the basic equipment: - All necessary components such as laser cabin, control, supply unit and extraction integrated. - Prepared for function modules that can be used at any time - Laser class 1 due to closed housing - Marking field standard 150 x 150 mm (other sizes on request) - Generous working area (400 x 400 x 300mm) - NC-controlled Z-axis 300 mm for automatic adjustment to different workpiece heights Technical data see appendix.

See details

Advertise here