Folding machine

MBO K 76 S-KTL/4-R

Condition: good (used), Year of construction: 2000, functionality: fully functional, 4 pockets Fgodpfxsxbpvuj Afkec with MBO SBAP 46 ME, vertical stacker delivery

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE Fodpfeh Eibaox Afkegc The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Year of construction: 1989, Zusammentragmaschine / Collating Machine TMF N1414 Stationen Zusammentragmaschine A3 - 7 Stationen Zusammentragmaschine A2 14 Stations Collating Machine Size A3 - 7 Stations Collating Machine Size A2 Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fgjdpfxoh Uk E Se Afksc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Fgedpjyhzubefx Afkjc Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Available from 05/2026.

Condition: used, Year of construction: 2006, The Heidelberg Stahlfolder Ti 40/4-SAK is a compact and efficient folding machine designed for small to medium-sized print shops. It has 4 pockets and an SAK stream delivery system Format: 400 x 650 mm Equipment: Feeder Feeder Mode: Flat pile feeder Type: FI-40 Control Unit: DCT 500 Folding Units 1st unit Type: Ti-40 Year: 2004 Fgsdpfx Ajwcqxvsfkoc Pockets: 4 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Noise Protection Hood Serial number: F-00226 Delivery Delivery mode: Shingle delivery Technical Details Sheet size max: 400 x 650 mm Sheet size min: 80 x 100 mm Max. mechanical speed: 180 m/min.

Condition: good (used), Year of construction: 1990, Built in 1990 Size: max 460 x 305 x 60 mm min 140 x 103 x 2 mm Book block thickness: max 60 mm min 2 mm Cover size: max 470 x 655 mm min 140 x 210 mm Fjdpfxsgmr N Tj Afksgc Speed: max 7.000 c/h Equipment gathering machine: gatherer ZTM 370 x 20 missing sheet and double sheet control criss-cross delivery perfect binder: 26 clamps milling station spine preparation station dust extraction fume extraction hotmelt spine gluing unit 2nd hotmelt spine gluing unit hotmelt side gluing unit stream cover feeder 2. cover pressing station lay down device standards: 1 set of operator manuals 1 set of electrical diagrams 1 set of standard tools

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,150 mm, Equipment: documentation/manual, safety light barrier, AUTOTRIM Polar pile lift Monitor Program Light barrier Air table Side tables Fgsdpjy Efpzjfx Afkoc The Polar 115 ED-AT is a high-performance guillotine cutter specially designed for industrial demands and the highest precision in post-press finishing. The abbreviation "AT" (Autotrim) stands for automatic waste removal, which significantly increases productivity compared to standard models. The Polar 115 ED-AT guillotine cutter is the ideal all-round model for the 70 x 100 cm print format. Thanks to the integrated Autotrim function, cutting waste is automatically disposed of during the process, speeding up workflow and reducing operator workload. The ED control system provides intuitive user guidance via a high-resolution color display and enables complex programming for recurring jobs. Cutting width: max. 1,150 mm Stack height: max. 165 mm Insertion depth: 1,150 mm Autotrim: Automatic waste removal via the front table Control: Programmable ED electronics with color monitor Table surface: Chrome-plated air table for easy material handling Safety: Infrared light barriers, two-hand cut release, and safety bolts

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC Fedpfx Afsxftalokogc 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Fedjwhpavepfx Afkegc

Condition: used, Year of construction: 1991, Falzmaschine / Folding Machine  Stahl TF 78/6-4-2 16 Seiten Falzmaschine / 16 pages folding machine Fgjdpfx Afsuq Sp Asksc Baujahr / Year 1991 Rundstapelanleger / Round Pile Feeder Format min. 140 x 180mm - max. 780 x 1200mm Paper weight 40-250 g/m2 Falztyp / Folding Type: 6 buckles - 4 buckles - 2 buckles Auslage / Delivery SAK 66 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test