Universal machining center

MATSUURA MAM72-25V PC2

Condition: ready for operation (used), Year of construction: 2007, operating hours: 66,963 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, table load: 40 kg, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS B-axis: +110° to -110° C-axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet System Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid Traverse and Feed Rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B-axis: 30 rpm Feed rate C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations occupied): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guideways Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws X, Y, Z axes Ø: 36 mm Pitch: 16 mm Axis Drives Motor rating X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Motor rating B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN (value not specified) MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Standard machine weight: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Electrical Connections Total connected load (standard machine): 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Expanded tool magazine capacity to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, pressurized with sealing air KNOLL coolant system: 1 scraper or hinge belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010) Csdpfx Aswx Iugeixjrf 1 through-spindle coolant supply with KTS25-50T coolant pump, capacity 31 l/min at 70 bar, 5.5 kW, three-stage adjustable pressure 1 external coolant with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flush with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 auger-type conveyors in the machine RENISHAW OMP 60 probing system for automatic workpiece zero-point setting and measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, CNC control Heidenhain iTNC530 24-fold automatic tool changer electronical handwheel chip conveyor coolant through spindle device Technische Daten / technical details: X-Weg / X-travel 860 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 600 mm Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Cjdpfx Asy Hqmhjixerf Tischaufspannfläche / table clamping area 1000x560 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain Mill Plus V600 Credpfx Aiewgi Drexof weight of the machine ca. 7000 kg

Condition: used, Year of construction: 2009, operating hours: 28,600 h, functionality: fully functional, machine/vehicle number: 10915566124, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,800 kg, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 eVo 5-Axis Universal Machining Center Machine Brand: DMG MORI Model: DMU 50 eVo Linear Year: 2009 Control: Siemens Sinumerik 840D Cedszl Rxxopfx Aixjrf Technical Specifications * Machine Type: 5-Axis CNC Universal Machining Center * Simultaneous 5-Axis Machining * Travels (X / Y / Z): 500 × 450 × 400 mm * NC Swivel Rotary Table * Table Diameter: Ø630 mm * Maximum Table Load: 300 kg * B-Axis Swivel Range: -5° to +110° * C-Axis Rotation: 360° * Maximum Workpiece Diameter: Ø630 mm * Maximum Workpiece Height: 500 mm * Rapid Traverse (X / Y / Z): 24 m/min * Spindle Speed: 15,000 rpm * Spindle Taper: SK40 * Main Spindle Power: 19 kW * Maximum Torque: 130 Nm * Tool Magazine: 30 Positions * Maximum Tool Diameter: 80 mm (130 mm with adjacent pockets free) * Maximum Tool Length: 300 mm * Maximum Tool Weight: 8 kg * Direct-Drive Spindle * Roller Linear Guideways * Precision Ball Screw Drives * Digital AC Servo Drives * Automatic Tool Changer * Through-Spindle Coolant Preparation * Flood Coolant System * Central Automatic Lubrication System * Electronic Handwheel * Rigid Tapping * Helical Interpolation * High-Speed Machining (HSC) * Full Machine Enclosure * Machine Weight: Approx. 7,500 kg * Machine Dimensions (L × W × H): Approx. 2,600 × 2,400 × 2,900 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis Cedpfx Aey S A Risixorf - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: good (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Reference XI 15.9.7 Year of manufacture: 2018 Manufacturer: Hexagon Measuring range: 1500 x 900 x 700 mm Credjyg I Hdspfx Aixef Accessories: Probe head mount: HP-SX-5 probe head Probe head: +2 change discs Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, Controller B5 As specialists, we are pleased to offer you tailored advice to find the right machine for your measurement requirements. We offer worldwide delivery upon request!

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Cjdpfx Aeulnbkoixorf Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Crsdpfxorq Ebie Aixof Also Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Crsdpfxezi S E Ue Aixef Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º Cedsy Twa Uopfx Aixorf SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT