Horizontal machining centre

Matsuura H-Plus 405

Condition: excellent (used), Year of construction: 2015, operating hours: 43,000 h, functionality: fully functional, machine/vehicle number: 19978, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Fanuc, controller model: 30i, workpiece height (max.): 850 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 400 kg, operating hours of spindle: 7,000 h, spindle mount: MK 4, number of spindles: 1, This machine is an excellent production machine. For several reasons, we have to part with this machine earlier than planned, as we need to install a 5-axis machine in its place. Otherwise, we would certainly continue using it for many more years. Nodjywgglopfx Agwskw

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. Nkjdpfshzbipex Agwjw - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm Nksdsx Utv Ujpfx Agwow • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power

Condition: good (used), Year of construction: 2003, Machining Centre Manufacturer: Matsuura Nkodpjltlx Nefx Agwsw Model: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Travels X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-fold pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure unit Internal cooling 70 bar 17326ä

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Nkjdexdc Uvopfx Agwjw

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Fanuc, controller model: 30i, spindle nose: BT40, number of slots in tool magazine: 51, input voltage: 380 V, type of input current: three-phase, MATSURA HPLUS 405 2007 MODEL PALLET SIZE 500-500 FANUC 30i CONTROL SYSTEM BT40 12000 rpm SPINDLE KNOLL TYPE COOLING SYSTEM NEARLY AROUND 50 SETS OF TOOL HOLDERS ALONG Nksdpfx Agoyrdywswow 51 TOOL CAPACITY ATC 600-600-600 X-Y-Z AXIS TRAVEL IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Width: 600 Length: 600 Height: 600 Number of axes: 4 Holder: SK40 Spindle speed (rpm): 15,000 Nodpfx Agjx Tzmxewskw Processable material types: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, Nkedpfx Ajxwytcogwew table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Width: 600 Length: 600 Height: 600 Number of axes: 4 Njdox Tzafepfx Agwskw Tool holder: SK40 Spindle speed (RPM): 15,000 Processable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 40 [kW] - Spindle speeds : 12000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES Nksdpfsw Ephbsx Agwjw - Travels on X/Y/Z axes : 2400/1650/1750 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 116 - Tool exchange time : 3.8 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1600 x 1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 5000 [kg] - Distance table center / spindle nose (min./max.) : 100 - 1750 [mm] - Maximum workpiece diameter : 2500 [mm] - Maximum workpiece height : 1850 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 86 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9.485 x 6.155 [mm] - Machine height : 4.370 [mm] - Machine weight : 50000 [kg] MACHINE HOURS - Number of working hours : 15446 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With washing gun * With cabin washing - Chips conveyor - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw RMP60 - Tool breakage detection : SOFT AC - Pallets number : 2 - Milling vice - Tool-holders