Screw compressor

MARK MSM5.5D TM500

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM7.5D TM500 S/N ITJ874643 YEAR 2024 Dkodpfx Agevrcuco Dok CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Dedpfxewm Ih Ao Ag Djkk Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: ready for operation (used), An inspection is possible. Dksdsn D Hbnjpfx Ag Dok

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE Dkedpfxsmv Elpe Ag Dsk TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: excellent (used), functionality: fully functional, CECCATO CSM 5.5 X mini screw compressor Power 4kw Working pressure 10bar Efficiency about 470l/min Dksdpfsvurttsx Ag Dok Noise level 62dB Dedicated dryer Air tank 270l

Condition: good (used), Year of construction: 2004, ALUP screw compressor TYPE SCK 31-10/SON 3.12 volume flow 10 bar final pressure 22.0 KW with refrigeration dryer and boiler Dodswmwpijpfx Ag Dskk

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade 6 feed grooves Dkjdpjuq N Agefx Ag Dok Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 315 kg, volume flow: 85.2 m³/h, pressure (max.): 10 bar, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM11 D TM500 S/N ITJ874644 YEAR 2024 CAPACITY (kW) 11 OUTPUT (m3/min) 1.42m3/min CIS (bar) 10 Dsdovrfdtjpfx Ag Dokk HRS (DOC/GENERAL) 0 INVERTER NO BUILT-IN DEHUMIDIFIER YES ON TANK YES 500L DOCUMENTS YES

Condition: new, Year of construction: 2025, C43 airend Motor power 5.5 kW Pressure 8 bar FAD 888 l/min – 53 m3/h Power supply 400 V – three-phase -50 Hz Start YD Dsdpfsvpgcljx Ag Dekk Noise level 66 dB Connections 3/4″

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable Dedeb A I Ikspfx Ag Dokk The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg