Other

MAN TGS 18.360 BL CH 4x4 Kommunal/Winterdienst / Neu

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Municipal new vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper with Meiller and Küpper-Weisser winter service equipment. MAN manufacturer's warranty until 02.12.2026 Equipment: Mileage approx. 441 transfer kilometers 18,000 kg permissible total weight 22,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load during winter service operation up to a maximum of 62 km/h 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics with 2-circuit system and quick couplings, manufactured by Küpper-Weisser Front mounting plate, form F1/C, according to DIN EN 15432-1 with hydraulic connections Winter service lighting Preparation for additional lighting on the vehicle rear Heated windshield Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for external attachments) TGS NN medium cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as an external planetary axle, driven, can be engaged High construction Differential lock in front and rear axle Meiller 3-side tipper, approx. 4.80 m x 2.42 m x 0.60 m high Front wall 0.80 m high Side walls, M-Jet, steel HB 450, 2.5 mm Platform floor made of steel HB 400, 4 mm Tie-down points fully recessed in the floor panel Tipper side walls, pivoting and foldable, deep closures Tipper rear wall, pivoting with automatic closure Transfer gearbox MAN G172 with on-road and off-road mode MAN TipMatic 12.26 OD Gear function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Air conditioning, Climatronic Auxiliary heater, 4 kW Trailer coupling, ring spring type RF40/G150A with compressed air connections Tipper hydraulic connection at the rear Front axle leaf-sprung, rear axle air-sprung Front axle AP 9 tons, rear axle AP 13 tons Stabilizer for front and rear axle MAN Comfort Steering Hill start assist MAN EasyStart Full brake assistant Lane departure warning system LDW EBS ASR ESP ABS Offroad with additional off-road logic Cruise control High-performance engine brake MAN EVBec, can be adjusted 390 liter aluminum tank on the right Sun visor Gedpfx Amjyv Tuaozsbp 2 rotating beacons and 2 work lights Dustbin in the cab Reversing warning, audible, can be deactivated when reversing Rear view camera Multi-function steering wheel Control panel MAN EasyControl, 2 functions can be operated from the outside with the door open Electrically adjustable and heated exterior mirrors Electric windows MAN Media System Advanced 7 inches MAN sound system Smartphone integration Driver comfort seat, air-sprung, with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Municipal new vehicle with day registration on 02.12.2025 Archive images Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2517

Condition: used, mileage: 227,566 km, power: 130 kW (176.75 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 6,110 kg, overall weight: 12,500 kg, axle configuration: 4x4, wheelbase: 3,050 mm, fuel: diesel, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 2, total length: 5,100 mm, loading space length: 2,650 mm, loading space width: 2,000 mm, loading space height: 4,000 mm, Year of construction: 2012, operating hours: 16,641 h, construction height: 3,360 mm, Equipment: air conditioning, all wheel drive, hydraulics, onboard computer, trailer coupling, The Unimog U400 405/12 impresses with its versatility and robustness and is ideal for use in agriculture and construction. Powered by a powerful 4,249 cc diesel engine with 177 hp and the Euro 5 emissions class, it meets modern environmental standards. With a total mileage of 227,566 km and 16,641 operating hours, it is in good shape. The Unimog has a trailer hitch, air conditioning, a front PTO and municipal hydraulics, which support flexible attachment options. The vehicle was built in 2012 and has only been used by one owner before. With its compact dimensions - 3,360 mm in height, 2,360 mm in width and 5,100 mm in length - it still offers an impressive payload with a permissible total weight of 12,500 kg. The Unimog has a green environmental sticker, which allows it to be used in urban emission zones. Operating hours: 16,641 hours Only sold to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Gsdpfxer Uztho Amzsbp

Condition: used, mileage: 441 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, municipal new vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper with Meiller and Küpper-Weisser winter service equipment. MAN manufacturer's warranty until 02.12.2026 Equipment: Mileage approx. 441 transfer kilometers 18,000 kg permissible total weight 22,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load in winter service operation up to a maximum of 62 km/h 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, 2-section with quick couplings, Küpper-Weisser Front mounting plate, type F1/C, according to DIN EN 15432-1 with hydraulic connections Winter service lighting Preparation for additional lighting on the rear of the vehicle Heated windshield Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for external attachments) TGS NN medium cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as an external planetary axle, driven, switchable High configuration Differential lock in front and rear axle Meiller 3-sided tipper approx. 4.80 m x 2.42 m x 0.60 m high Front wall 0.80 m high Side walls M-Jet, steel HB 450, 2.5 mm Bridge floor made of steel HB 400, 4 mm Tie-down eyes fully retractable in the floor panel Side walls of the tipper body, pivoting and foldable, deep latches Rear wall of the tipper body, pivoting with automatic latch Transfer case MAN G172 with road and off-road gear MAN TipMatic 12.26 OD Gear function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Air conditioning, Climatronic Auxiliary heater, water, 4 kW Trailer hitch, ring-feder type RF40/G150A with compressed air connections Tipper hydraulic connection at the rear Front axle leaf-sprung and rear axle air-suspended Front axle AP 9 tons, rear axle AP 13 tons Stabilizer for front and rear axle MAN Comfort Steering Hill start assist MAN EasyStart Full brake assistant Lane departure warning LDW EBS ASR ESP Gbjdjyv Tt Njpfx Amzsp ABS Offroad with additional off-road logic Cruise control High-performance engine brake MAN EVBec, adjustable 390 liter aluminum tank, right Sun visor 2 rotating beacons and 2 work lights Dustbin in the cab Reversing warning, acoustic, can be switched off when reverse gear is engaged Rear view camera Multi-function steering wheel Control panel MAN EasyControl, 2 functions operable from the outside with the door open Electrically adjustable and heated exterior mirrors Electrically operated windows MAN Media System Advanced 7 inch MAN sound system Smartphone integration Driver's comfort seat, air-suspended with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Municipal new vehicle with day registration on 02.12.2025 Archive images Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2517

Condition: used, mileage: 441 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Municipal new vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper with Meiller and Küpper-Weisser winter service equipment. MAN manufacturer's warranty until 02.12.2026 Equipment: Mileage approx. 441 delivery kilometers 18,000 kg permissible gross vehicle weight 22,000 kg technically permissible gross vehicle weight for winter service 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load for winter service operation up to a maximum of 62 km/h 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, 2-section system with quick couplings, manufacturer Küpper-Weisser Front mounting plate, type F1/C, according to DIN EN 15432-1 with hydraulic connections Winter service lighting Preparation for additional lighting on the vehicle rear Heated windshield Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for external attachments) TGS NN medium cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as external planetary axle, driven, switchable High configuration Differential lock in front and rear axles Meiller 3-sided tipper, approx. 4.80 m x 2.42 m x 0.60 m high Front wall 0.80 m high Side panels, M-Jet, steel HB 450, 2.5 mm Floor of the loading platform made of steel HB 400, 4 mm Tie-down points fully recessed in the floor panel Side walls of the tipper, pivoting and foldable, deep latches Rear wall of the tipper, pivoting with automatic latch Transfer case MAN G172 with on-road and off-road gears MAN TipMatic 12.26 OD Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, shunting mode Air conditioning, Climatronic Auxiliary heater, 4 kW Trailer coupling, Ringfeder type RF40/G150A with compressed air connections Tipping hydraulic connection at the rear Front axle with leaf springs, rear axle with air suspension Front axle AP 9 tons, rear axle AP 13 tons Stabilizer for front and rear axles MAN Comfort Steering Hill start assist MAN EasyStart Full brake assist Lane departure warning LDW EBS ASR ESP ABS Offroad with additional off-road logic Cruise control High-performance engine brake MAN EVBec, adjustable 390-liter aluminum tank, right side Sun visor 2 rotating beacons and 2 work lights Dustbox in the cab Reversing warning, audible, can be switched off when reversing gear is engaged Reversing camera Multi-function steering wheel Gsdpfx Ajyv Tt Aemzsbp MAN EasyControl control panel, 2 functions can be operated from the outside when the door is open Electrically adjustable and heated exterior mirrors Electric windows MAN Media System Advanced 7 inches MAN sound system Smartphone integration Driver comfort seat with air suspension, lumbar support, shoulder adjustment and heating Seat covers in comfort quality Municipal new vehicle with registration date 02.12.2025 Archive images Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2517

Condition: used, power: 210 kW (285.52 HP), first registration: 11/2007, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, gearing type: semi-automatic, number of gears: 8, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, electric window regulation, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional options and equipment = - Tachometer Gedpfsvk Nqnex Amzjbp - Rear electric windows - Radio/CD player - Reversing camera = Further information = Number of cylinders: 6 Engine displacement: 6,374 cc Unladen weight: 8,663 kg Payload: 3,837 kg Gross vehicle weight: 12,500 kg Max. towing capacity: 10,000 kg (unbraked 750 kg) Interior: grey MOT (main technical inspection): New TÜV upon delivery Number of keys: 2

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Also Gbjdperq Ebisfx Amzsp Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Godpfxeqz T H Ao Amzobp Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled Gbedpfx Asu Smd Eemzsp - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. Gbsdpfxed I Aw Eo Amzjp SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options.

Condition: as good as new (ex-display), Year of construction: 2026, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Gbedpfxehl If No Amzep Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm