Used Weingarten Arp100 for sale (70)

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm Dedpfx Ahjxh Swhogoci hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. Dcodpfxeu Rwa Ij Ahgji throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown Dcsdpfx Ahjd Nzg Regei

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm Dcedey Nd Svopfx Ahgei hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, pressure 160 t distance between columns 1360 mm stroke 300 mm Dcedoyx Im Njpfx Ahgei Distance table/ram, max. stroke up, adjustment up 620 mm table surface area 1300 x 900 mm table height over floor 950 mm side window 640 mm ram surface 1300 x 900 mm power requirement 45,0 kW weight 16,0 t Dimensions (WxDxH) 2,5 x 2,1 x 4,1 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop No foundation pit necessary

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 1340 mm Dsdeyx Ihmopfx Ahgeci stroke 300 mm Distance table/ram, max. stroke up, adjustment up 600 mm table surface area 1300 x 900 mm table height over floor 930 mm side window 600 mm ram surface 1300 x 900 mm speed down 367 mm/s speed up 390 mm/s working speed 58 mm/s oil volume 800 l power requirement 30,0 kW weight 15,0 t Dimensions (WxDxH) 2,5 x 2,2 x 4,0 m with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic cutting impact cushioning, depth stop (motorized adjustment), two-hand operation No foundation pit necessary

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm hole in the table 250 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm Dsdeynmn Nopfx Ahgeci ram adjustment 63 mm power requirement 4,0 kW weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm Dedpfovuuaisx Ahgoci hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm Dcodpfovut Ncjx Ahgoi power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 2004, machine/vehicle number: 257253, Clamping force: 13,000 kN, total weight: 69,000 kg, including spraying unit WOLLIN, deburring press REIS TKP3, serial number: 181013, year of manufacture: 2004, weight: 680 kg, industrial robot REIS V60, serial number: 541010, year of manufacture: 2004, machine weight: 1,950 kg, melting and holding furnace STRIKO WESTOFEN W1200SL Pro, year of manufacture: 2004, serial number: 7961, furnace chamber volume: 970 dm³, empty weight: 3,100 kg, heating capacity: 22 kW, machine out of service, not ready for operation. Dcjdjzhaydopfx Ahgji

Condition: used, Year of construction: 1998, Press force: 250 t Frame width: 1350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1250x800 mm Side clearance: 640 mm Table height: 800 mm Machine weight (approx.): 36,000 kg Space required (approx.): 3600x2800x5700 mm Maintenance/Service/Spare parts: - 2012: New display screen - 2017: Hydraulic pump completely overhauled Dcodezhupmspfx Ahgsi - 2017: Sitema fall protection system renewed - 2018: New seals for the press cylinder - 2018: New seals for the control block - 2018: Oil change including tank cleaning - Annual UVV inspection of the press and safety devices

Condition: good (used), Year of construction: 1960, functionality: fully functional, Weingarten Eccentric Press ER 80 – 80 tons – Year of manufacture 1960 For sale is a robust WEINGARTEN eccentric press, type ER 80, manufactured in Germany. Technical specifications: Manufacturer: Maschinenfabrik Weingarten A.-G. Type: ER 80 Pressing force: 80 tons Stroke rate: 60 strokes/min Adjustable ram stroke: 8–112 mm Dcodpfxozkhnns Ahgoi Ram adjustment: 80 mm Year of manufacture: 1960 The machine is in used condition, commensurate with its age. Ideal for metalworking, stamping, and forming operations. Inspection possible by arrangement. Sale from the current location; the seller will handle loading, and the buyer will organize transport.

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Dsdst Hwz Nspfx Ahgsci Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Dcodpfey I U U Ssx Ahgji Technical Data Sheet thickness: 1.25 mm Bending length: approx. 2030 mm

Condition: used, Manual guillotine shear Type: Weingarten TH Condition: Used Technical data Cutting width: approx. 1070 mm Dcodpfx Aoy I U Acohgoi Sheet thickness: 1.25 mm

Condition: used, Year of construction: 1962, pressure 080 t throat 300 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 467 mm table surface area 710 x 560 mm hole in the table 240 x 115 mm table height over floor 800 mm ram surface 400 x 315 mm Dcedpfxsyq Smie Ahgji ram adjustment 80 mm power requirement 7,5 kW weight 5,1 t dimensions (WxDxH) 1,4 x 1,9 x 2,7 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm Dsdpfxjyq Sl So Ahgjci no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm Djdpfsvuuc Rex Ahgeci ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Dcjdpfxov E Rm Ho Ahgsi Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm Dcsdpfxougnpie Ahgoi dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Dsdpfxsrm Ntps Ahgeci Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, Technical details: Dcodpfx Ajvgbgaohgei plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Djdpfx Asu Ic Avehgoci Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm Dcsdpfx Aevut N Ashgsi power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm Dcsdpfx Ahjfx Hv Hegsi stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories