Used W6000/32M for sale (243)

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 439 kg, total height: 1,830 mm, total length: 900 mm, total width: 1,070 mm, load capacity: 6,000 kg, winch Producing company Manitou Type W6000/32M Year built 2024 Height (mm) 1,830 Length (mm) 900 Lifting weight (kg) 6,000 Weight (kg) 439 Width (mm) 1,070 Gkedpfxexpyate Aivec

Condition: used, functionality: fully functional, Year of construction: 2022, overall weight: 439 kg, total height: 1,820 mm, total length: 900 mm, total width: 1,090 mm, load capacity: 6,000 kg, winch Producing company Manitou Type W6000/32M Year built 2022 Height (mm) 1,820 Length (mm) 900 Gkjdez N Iphopfx Aivoc Lifting weight (kg) 6,000 Weight (kg) 439 Width (mm) 1,090

Condition: used, maximum load weight: 29,080 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, total length: 9,615 mm, total width: 2,550 mm, total height: 3,345 mm, Equipment: ABS, Wielton Strong Master NW-3 Steel Dump Body 32m³ HARDOX Chassis/Body: Super Light Chassis * Straight longitudinal beams * Weight-optimized S700 steel * Steel dump body, approx. 32 m³ Gksdjz Hgniepfx Aivec * Front wall angled at 20° * Interior height: 1,640 mm * Floor: 4 mm Hardox HB 450 * Side walls: 3 mm Hardox HB 450 * Swinging tailgate * 2 tension locks at the bottom * Tension chain between the side walls * Work platform with access ladder on the left * Tarpaulin cover, 680 g/m² * Tare weight: 6,592 kg Suspension/Axles: SAF axles * 1st axle liftable * Disc brakes * Air suspension * Axle distance: 1,310 mm * Kingpin to 2nd axle: 5,560 mm * SAF front outriggers, full load * Steel rims * Tires: 385/65 R 22.5 * Spring pressure gauge * Fifth wheel height: approx. 1,150 mm Tipping Mechanism/Braking System: HYVA tipping cylinder * Automatic lowering during tipping, can be disabled * WABCO braking system * Folding underrun protection at the rear Equipment: Aspöck LED lighting * Toolbox * Water tank, 30 liters Color: Paint: RAL 9006 White Aluminum * Tarpaulin color: RAL 9006 White Aluminum Highlights: Only 6,592 kg tare weight * 32 m³ steel dump body * Floor and side walls made of Hardox HB 450 * Weight-optimized Super-Light chassis made of S700 steel * Lift axle * HYVA tipping cylinder We will be happy to provide you with further information.

Year of construction: 1995, condition: excellent (used), 3 Sulzer MB 40-160/5 centrifugal pumps Flow rate: 32 m³/h Head: 147 m Maximum temperature: 130°C Gedsd Sybpopfx Aivekc Seal: Mechanical seal with barrier fluid Drive power: Siemens 22 kW Speed: 2950 rpm ! Price per unit !

Year of construction: 2001, condition: good (used), 2 units of axially split spiral casing pumps with motor and baseplate. Last application as a turbine. !!! Performance curves as a pump and as a turbine are included as images !!! Manufacturer: KSB Type: Omega 350-360 A Flow rate: 1728 m³/h Head: 32 m Speed: 1450 rpm Year of manufacture: 2001 In turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approximately 20 meters head and 1600 m³/h Voltage: 400 V In pump operation: Required shaft power: 177 kW Gedsd Nqi Rspfx Aivokc Required electric motor: 200 kW NPSH value: 6.9 Efficiency: 85.28% Maximum operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Condition: ready for operation (used), Year of construction: 1993, turning length: 1,900 mm, turning diameter: 700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 25 rpm, rotational speed (min.): 25 rpm, rotational speed (max.): 4,000 rpm, total height: 2,520 mm, total length: 9,000 mm, total width: 4,100 mm, overall weight: 21,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, -Turning length: 1900 mm -Maximum workpiece diameter over the bed: 700 mm -Spindle head A11 DIN 55026 -Tool system: 2 x 12 pieces -Tool holders according to DIN 69880, diameter 50 mm Gsdoztr N Iepfx Aivskc -Automatic door sliding mechanism -Tailstock prepared for diameters of 80 mm - 262 mm -Pressure booster pump

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg. Gjdpsz H U I Rsfx Aivekc

Condition: used, mileage: 44,895 km, power: 130 kW (176.75 HP), first registration: 06/2013, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, emission class: euro5, total length: 8,500 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, crane, soot filter, Mercedes-Benz 818 Atego with Böcker roofing crane AK32/1500 + cable winch 4x2 Self-propelled work machine Suspension: leaf spring / leaf spring Wheelbase: 4.20 m Böcker Crane Type: AK32/1500 Year: 2013 Payload: 1500 kg 4x hydraulic outriggers 3300 operating hours + cable winch HY1510 Special equipment: Audio system: CD radio, Reinforced battery, Battery 165 Ah, Differential lock rear axle, Electric windows, Generator 100 A, Godpfxsz D Ntpj Aivokc Gearbox lock for auxiliary drive, Graphic info display with eco-meter, Air dryer 1 chamber, heated, Engine brake with constant throttle, Auxiliary drive MB 56-2C, Configurable special module, Rear window, Reinforced stabilizer rear axle (for extremely high loads) Additional equipment: Emission standard EURO 5, Axle configuration: 4x2, Exterior mirrors electrically adjustable and heated, Cockpit distributor, Roof hatch (steel), Cab: S (short), Suspension: leaf / leaf, Gearbox 6-speed - Type: G 56-6, Urea tank (AdBlue): 25 L, Urea tank (AdBlue): plastic, Rear axle H 2, Ring gear 325, Interior filter: pollen filter, Fuel tank: 125 L, Atego 2 model update, Engine 4.3 L - 130 kW diesel (OM 904 LA), Engine start/stop system, Wheelbase 4220 mm, Disc brakes, Side impact protection, Seats in the cab: passenger single seat, fixed, Seats in the cab: driver's seat, standard suspension seat, Rear underrun protection, fixed, Immobilizer, Permissible total weight 7.49 t We will gladly assist you with financing/leasing through our partners. All information is without guarantee. Errors and prior sale are reserved.

Condition: used, mileage: 168,000 km, power: 353 kW (479.95 HP), first registration: 12/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Int. No.: 214 Very well-maintained MAN TGS 35.480 8x4 with a powerful EFFER crane * MAN * TGS 35.480, year of manufacture 2015 * 8x4 * Tridem axle, steerable * Leaf spring suspension with air suspension * Permissible weight 32,000 kg (technically 35,000 kg) * Tipper, 2-sided, Hardox steel * CRANE EFFER 395 H6S+JIB, year of manufacture 2020 * Hook height approx. 32m * REMOTE CONTROL for CRANE * 6x hydraulic extensions + 4x hydraulic JIB + manual * Grapple available at extra cost * 5th/6th hydraulic circuit to the end of the JIB * Differential lock * Central locking * RETARDER * STANDING HEATER * 2-seater * Radio * AIR CONDITIONING * Tires: approx. A: 70% B: 80% C: 45% D: 80% Godpfx Ajz Dc T Aoivskc * Tow hitch 40,000 kg * Very good condition * First owner * VAT can be shown!!! Trade-ins possible Financing available from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typing and data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany available upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, mileage: 168,000 km, power: 353 kW (479.95 HP), first registration: 12/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Int. No.: 214 Well-maintained MAN TGS 35.480 8x4 with a powerful EFFER crane * MAN * TGS 35.480, year of manufacture 2015 * 8x4 * Tridem axle, steerable * Leaf spring suspension with air suspension * Permissible weight 32,000 kg (technically 35,000 kg) * Tipper, 2-sided, Hardox steel * CRANE EFFER 395 H6S+JIB, year of manufacture 2020 * Hook height approx. 32 m * REMOTE CONTROL for CRANE * 6x hydraulic extensions + 4x hydraulic JIB + manual * Grapple available at extra cost * 5th/6th control circuit to the end of the JIB * Differential lock * Central locking * RETARDER * STANDING HEATER * 2 seats * Radio * AIR CONDITIONING * Tires: approx. A: 70% B: 80% C: 45% D: 80% * Trailer coupling 40,000 kg * Very good condition * 1st owner * VAT can be shown!!! Trade-in possible Gkodpfx Aisz Dc T Nsvoc Financing from 4.99% Errors and prior sale reserved! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany possible upon request. Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Gkjdpfxetqfq Rj Aivec

Condition: used, maximum load weight: 27,650 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2021, loading space volume: 32 m³, Year of construction: 2021, Equipment: ABS, Stock no. 4912 Insulation slightly damaged, tank in good condition! 32,000 Liter Kässbohrer V2A Bitumen Tank Semi-Trailer / Insulated / Accident Damage / Single Owner - Manufacturer: Kässbohrer - Model: STS 32/1 - 10/24 - First registration: 04/2021 - Capacity: 32,000 liters in 1 compartment - Gross weight: 34,000 kg - Unladen weight (per registration papers): 6,350 kg - Payload: 27,650 kg - Axles: 3 x BPW with 1st axle liftable / disc brakes - Suspension: Air suspension with raise and lower function - Tyres: 385/65 R 22.5 approx. 50% on aluminium rims - Colour: Chassis carmine red, tank body white aluminium - EBS Wabco - Roadworthiness certificate (TÜV): valid until 03/2026 - Tank inspection: valid until 04/2027 - Leak test: valid until 04/2030 - ADR certificate valid until 01/04/2026 - Tank code: L4BH - ADR code: FL / AT - Pressure vessel 2 bar - Operating temperature: up to +250°C - 1 dome cover at the front - Access ladder front right with walkway left and right - 4 baffle walls - 1 x thermometer rear right - DN 100 bottom valve at rear, manual operation right side - DN 100 shut-off valve rear right, with handwheel - 3-inch discharge line at rear Gkedeyawklspfx Aivoc - 1/2 inch sampling tap at rear - Fire extinguisher box rear right and left (without extinguishers) - Grounding - Open hose tray on right side - LED reversing lights - LED work lamps - Toolbox rear left - Full load support legs - Individual mudguards - Wabco AirSuspension control box - Single owner German trailer!! German documents!! 1st owner!! Insulation slightly damaged, tank in good condition! Disclaimer regarding potential listing errors: Despite careful creation of the listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to verify details or clarify any questions.

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. The resonator is in good used condition and operates flawlessly. Two identical units are available (price is per unit). Gsdpfx Aieyt Dchovskc

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Gkodpoz Agw Eefx Aivsc - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: Gjdpovyaxusfx Aivokc D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) Godpfxsr I S H Es Aivskc * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible. Godpfxozgwyle Aivokc

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2450mm/2750mm, travel Z1/Z2: 2700mm/2300mm, max. workpiece diameter: 2800mm, max. swing diameter in the working area: 3000mm, min. workpiece diameter for 4-axis external machining/internal machining: 1250mm/1500mm, min. workpiece diameter for 2-axis internal machining: 450mm, rotary table speed: 230rpm, feed rate X: 32m/min, feed rate Z: 20m/min, B-axis speed: 150rpm, spindle power: 33kW, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg. Machine dimensions X/Y/Z: approx. 9350mm/8600mm/5700mm, control system: Siemens SINUMERIK 840D sl. Documentation available. An on-site inspection is possible. Gksdpfozgwyxsx Aivsc

Condition: new, fuel type: diesel, color: other, Year of construction: 2026, Empty weight: 409 kg Lifting capacity: 6.000 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good General Gsdpfxszfwhtj Aivekc Country of production: Frankrijk New Manitou W6000/25M winch

Condition: used, Year of construction: 2011, 5 machines are only sold as a PACKAGE. Includes a large set of tool holders, fixed + driven. 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar loader 2x FMB / 1x Breuning Includes tools for the TRAUB machines Godpfjzxhxvjx Aivjkc Tools + clamping devices: - 54 x driven tool holders - 181 x fixed tool holders - Collets, etc. See photos The machines come from ongoing production. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar loader TOP ETL 8-45 One machine comes from ongoing production, one has already been used as a source of spare parts, several components have been removed. Dismantling and loading can be organized by a specialist company for an additional fee.

Condition: used, functionality: fully functional, FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Gedpfsw Iy Nyjx Aivskc Power demand 48kw Year of production 2006 Very good condition

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2008, Axle configuration Tyre size: 385/65 R22.5 Axle brand: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre tread left: 6 mm; Tyre tread right: 5 mm Rear axle 2: Tyre tread right: 5 mm Weights Unladen weight: 6,030 kg Payload: 32,970 kg Gross vehicle weight: 39,000 kg Gedpozgl Rfofx Aivekc Condition Damages: none

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm Gksdpfx Aerwx U Ijivoc • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 955 - Drive system: Conventional - Positieklemming: Hydraulic - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 Godpfx Aijzrgc Hjvokc - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, CORMAK 3040x1300 Radial Drill Press The CORMAK 3040x1300 radial drill press is an advanced industrial machine designed for precise drilling operations in materials such as steel and cast iron. The machine features a robust column construction and a wide range of radial arm adjustments, providing excellent stability and flexibility when machining large workpieces. Its key advantage is the ability to drill holes up to 40 mm in diameter while maintaining high precision. Main advantages of the CORMAK 3040x1300 radial drill press Heavy-duty construction weighing 1400 kg – ensures exceptional stability and vibration reduction, resulting in precise drilling and extended cutting tool life. Adjustable radial arm with a reach of 360–1300 mm – enables drilling in large and irregular workpieces without repositioning, increasing flexibility and reducing setup time. MK4 spindle taper with six speed settings (75–1200 rpm) – allows precise adjustment of machining parameters for different materials, enabling drilling holes up to 40 mm in steel and cast iron. 200 mm spindle stroke – allows deep drilling in a single cycle, improving production efficiency. 2.2 kW main motor – provides high torque for reliable continuous operation with optimized energy consumption. Gedpsi D Daqefx Aivskc 0.75 kW arm lifting motor – enables smooth and fast vertical adjustment of the radial arm at a speed of 1.3 m/min, improving operator ergonomics. Cube worktable measuring 510 × 380 × 305 mm – allows secure mounting of irregularly shaped workpieces, increasing machining safety and accuracy. Ergonomic control panel – positioned at the front of the machine for intuitive operation and quick parameter adjustment, minimizing downtime. Ground column surface – ensures smooth and precise arm movement, eliminating play and improving positioning accuracy. Manual head and arm locking system – increases safety and stability during drilling by preventing uncontrolled movement. Three spindle feed rates (0.10, 0.16, 0.25 mm/rev) – provide precise control of the drilling process according to the material and machining requirements. Standard equipment B16 drill chuck (3–16 mm) Drill chuck arbor B16/MK4 Reduction sleeve MK4/MK3 Drift key Cube worktable 510 × 380 × 305 mm Operating manual Technical specifications Parameter Value Maximum drilling diameter 40 mm Spindle axis to column distance 360–1300 mm Spindle axis to table surface distance 260–1300 mm Spindle stroke 200 mm Spindle taper MK4 Number and range of spindle speeds 6: 75, 130, 240, 380, 660, 1200 rpm Number and range of spindle feeds 3: 0.10; 0.16; 0.25 mm/rev Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Arm lifting motor power 0.75 kW Worktable dimensions 510 × 380 × 305 mm Machine dimensions 800 × 1800 × 2150 mm Weight 1400 kg