Used Veb Zg3Kmr80G6 for sale (312)

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Csdpfezavpgox Ac Tehb Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Csdpfx Aeylprfsc Tehb Weight: 40 tons

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Cedpfx Ajy D Rk Iec Tohb Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: good (used), functionality: fully functional, Thread rolling machine UPW 12.5X70. Chodpfx Acezpf U Ae Tob

Condition: used, * Single Facer * Width 2050 mm * New adhesive and grid walls * New corrugated rollers from Friese * New steam heads * New condensate valves Chjdsztng Nepfx Ac Tsb * Overhead line bridge also available

Condition: excellent (used), IM Very good condition. Chjdozkvh Nepfx Ac Tsb

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Chsdpjzdlrqofx Ac Tob

Condition: good (used), Year of construction: 1963, Stroke = 250 mm Cjdpfezvnd Tsx Ac Tshb On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Chsdpfx Acoy Ittgj Tjb

Condition: excellent (used), Weight: 760 kg Chsdpezkkr Aofx Ac Tjb Throat depth: 68 cm Table length: 115 cm Table width: 70 cm Cutting height: 10 cm Angle adjustment Motor: 4 kW

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Chjdpfxjzqfxdj Ac Tob

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Csdjytirnepfx Ac Tshb Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: good (used), Year of construction: 1987, Gearbox, spur gear, angle gear, worm gear, adjustable gear motor -Manufacturer: VEB, type 10 UO-50x30 oLTGL 258/4 -Translation: i = 30 -Shafts: Ø 25 x 60 mm / Ø 14 x 30 mm -Number: 1x gearbox available -Price per piece -Dimensions: 200/180/H170mm Codpet Iyuzefx Ac Tjhb -Weight: 9 kg/piece

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Chodpfx Ajtryc Nec Teb Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: used, VEB Polygraph 882/2-18 gathering machine 18 gathering stations Chsdpfjx Ab Ncsx Ac Tjb Features suction feeding 3-phase power, requiring 2-10 kW of power consumption at 440 V

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Chedpfewi Tidox Ac Tsb Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. Cedszfybcopfx Ac Tjhb A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces).

Condition: used, Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.80 kW -Construction: B3 Cjdpfsci N E Hsx Ac Tehb -Shaft diameter: Ø 48 mm -Protection class: EX -Dimensions: -Weight piece: 44 kg

Condition: good (used), Tool and cutter grinder VEB model SW200 Chsdpfx Asqutcloc Tob

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 52353, Short description: - Working width: 960 mm - Infeed: roll feeding - Opener not included - Discharge into can - Machine documentation available Last use (Jan. 2024): - Application-oriented product testing to assess the carding behavior of polyester fibers (approx. 6 kg/sample) Cjdpfx Asw Rkgboc Tehb - Not a production machine - White types - Untested, for spare parts only! Machine is dismantled and stored, but can be inspected on site. Pickup only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Inquiries in writing only, please.

Year of construction: 1983, condition: not inspected (used), machine/vehicle number: 50960, Short description: - Working width: 960 mm - Infeed: feed roller - Opener not included - Outfeed: carding belt - Can deposit Cedpfx Asw Rkdyoc Tjhb - Machine documentation available Last use (Jan. 2024): - Application-specific product testing for evaluating the carding behavior of polyester fibers (approx. 6kg/sample) - Not a production machine - 0.9-3.3 dtex; 32-60 mm (always with constant settings) - Black and spun-dyed types - Untested, sold only for spare parts! The machine is dismantled and stored, but can be inspected on site. Collection only by the buyer in 14727 Premnitz, no shipping. If interested, we look forward to receiving your offer. Enquiries in writing only, please.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: - Max. load capacity in horizontal position: 5000 kg Csdpfx Acoy Ec Eme Tohb - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points Csdpfjxaamuox Ac Tohb - chuck key - Movable tailstock - Operation manual

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7486, functionality: fully functional, spindle mount: MK 2, total width: 480 mm, total length: 620 mm, total height: 1,295 mm, overall weight: 165 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, stroke length: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Chsdpfx Aswgfkuec Teb

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, Chsdsu U Hvwjpfx Ac Teb can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.