Used Veb 1-Achser for sale (78,199)

Condition: used, Trailers, construction machinery trailers, GRP body, trailer cover box, cover for emergency power generator, fiberglass hood Bedpfoz Hvmzsx Aa Isdh -GRP construction: used as a cover for emergency power generator -Internal dimensions: 1600 x 1070 mm -Dimensions: 1780/1550/H900 mm -Weight: 55 kg

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Bdjdpfxozqfxde Aa Ish

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Bdodsy D Rk Ispfx Aa Ieh Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m Bsdpfxou Nfq Es Aa Iodh HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Bjdpfxeu Icguo Aa Ijdh Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! Bsdpfx Ajwqplkja Isdh for sale as spare part dispenser! *

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Bdjdszdlrqopfx Aa Ish

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VEB, Contact manometer 0 - 0.1 bar / 0-10 kp/cm² unused original packaging Bdedpfx Aoyfffzoa Ijh -Manometer: Type 1/BM 20/2 160Ø -Switch: 220V 30W 30VA -Number: 6x pressure gauges available -Price: per piece -Cardboard dimensions: 240/240/H125 mm -Weight: 0.9 kg/pc.

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Bdsdpfx Aajw Hl Ado Ijh Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1987, table length 1000 mm table width 1000 mm table load 1,5 t flange diameter 700 mm Bdodpotqqkuofx Aa Ish turning speed max. 0,04 U/min weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m

Year of construction: 1983, condition: not inspected (used), machine/vehicle number: 50960, Short description: - Working width: 960 mm - Infeed: feed roller - Opener not included - Outfeed: carding belt - Can deposit - Machine documentation available Last use (Jan. 2024): - Application-specific product testing for evaluating the carding behavior of polyester fibers (approx. 6kg/sample) - Not a production machine - 0.9-3.3 dtex; 32-60 mm (always with constant settings) - Black and spun-dyed types Bodow Rkdyspfx Aa Ijdh - Untested, sold only for spare parts! The machine is dismantled and stored, but can be inspected on site. Collection only by the buyer in 14727 Premnitz, no shipping. If interested, we look forward to receiving your offer. Enquiries in writing only, please.

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 52353, Short description: - Working width: 960 mm - Infeed: roll feeding - Opener not included - Discharge into can - Machine documentation available Last use (Jan. 2024): - Application-oriented product testing to assess the carding behavior of polyester fibers (approx. 6 kg/sample) - Not a production machine - White types - Untested, for spare parts only! Bdedow Rkgbspfx Aa Ish Machine is dismantled and stored, but can be inspected on site. Pickup only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Inquiries in writing only, please.

Condition: good (used), 1 x Trowaisiertrommel (Trowaising drum) Mafag VEB SG 2 A with timer Bsdpfx Aez Hurpea Iodh automatic lowering/lifting The machine can be inspected while powered on.

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA Bsdelf Iqnjpfx Aa Isdh - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Bjdpfx Aajzavpge Iedh Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes Bdedpfou U Hvwjx Aa Ijh - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U Bdedpfx Aajxaamue Ijh feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Condition: used, first registration: 07/2015, Year of construction: 2015, Tang EA 48 Ultralight Tautliner Curtainsider Trailer with Sliding Roof • Air Suspension • ABS • Tire Size: 215/75 R17.5 • Tire Condition: Average ~ 18 mm • Unladen Weight: 2,020 kg • Gross Vehicle Weight: 4,800 kg • Load Capacity: 2,780 kg Body: • Length: 7.78 m • Width: 2.5 m • Height: 3.05 m • Volume: 59.33 m³ - German Trailer! - First Owner! - Very Good General Condition! - New MOT/SP upon request and for an additional charge! Bdjdjwmn Rqspfx Aa Ieh Subject to errors and prior sale!

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Bedpstryc Nofx Aa Iedh Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Bedpfswndnuex Aa Ijdh Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Technical details: saw blade diameter: 250 mm Bsdpfx Asu Nif Tja Isdh grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: excellent (used), Machine for grinding bookbinding knives. grinding length 1500 mm. new grinding head. Bodpfx Ajwm Ht Roa Iodh

Condition: used, VEB Polygraph 882/2-18 gathering machine Bdedpfx Aox Ab Ncoa Ioh 18 gathering stations Features suction feeding 3-phase power, requiring 2-10 kW of power consumption at 440 V

Condition: used, Technical details: max. dia. of grinding wheel: 175 mm revolution per minute: 2750 m/sec. boring diameter: 20 mm number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, Bdedpou Ngtbjfx Aa Ish - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! *

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Bdedpfx Aajgqvlmo Ijh -Manufacturer: VEB, Double grinding wheel type SE 2x315/1 -Grinding wheel: max. Ø 315 mm -Peripheral speed: 45 m/s -Motor power: 1.0 kW -Operating voltage: 380 volts -Accessories: incl. grinding wheel dresser, see photos -Dimensions: 640/890/H1070 mm -Weight: 248 kg