Used Tornos Fb 1005 for sale (1,434)

Condition: used, Year of construction: 2006, operating hours: 59,800 h, machine/vehicle number: IntNr231615, A compact, high-precision horizontal CNC bar feed milling machine is for sale: ALMAC FB 1005 CNC, manufactured in 2006, equipped with a FANUC 16i-MB / 161MB control system. Technical data: Manufacturer: ALMAC / Tornos Type: FB 1005 CNC Year of manufacture: 2006 Control system: FANUC 16i-MB / 161MB Axes: 6 axes Travel ranges X / Y / Z: 280 / 230 / 120 mm Working feed rate X / Y / Z: Rapid traverse: 12 m/min Resolution: 0.001 mm Front spindle block: with spindles Side spindle block: 4 spindles Vertical spindle block: 4 spindles Parting spindle: 1 spindle Rear machining: 2 or 3 spindles Standard spindle: Speed: 1,000–12,000 rpm Power: 1.4 / 3.4 kW Parting spindle: Speed: 100–3,000 rpm Power: 1.4 / 3.4 kW Tool holder: ESX 20 / HSK 32-A Indexing table / C-axis: Bar feed: Pneumatic: 25 mm or CNC W-axis: 50 mm Swiveling / B-axis: Manual: 0–20° or CNC B-axis: 0–20° or -5° to +45° for short bars Coolant system: Coolant tank: 205 l Flow rate: 40 l/min Standard filtration: 35 µm / 28 µm Temperature control: 3,000 W for ΔT 3 °C Connection data: Installed power: 10 kVA Voltage: 3 × 400 V / 50 Hz Compressed air: 6 bar Dimensions with bar support: L × W × H: 1,800 × 4,250 × 2,060 mm Weight: approx. 1,800 kg The machine can be inspected in operation by prior arrangement. Cjdpfxszgggbe Afqjgw Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2012, operating hours: 37,500 h, machine/vehicle number: IntNr231616, Cjdpszggfqofx Afqegw

Condition: good (used), Year of construction: 1998, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm CNC turning machine Loading magazine: LNS Tryton 112 MAIN SPINDLE - Max. bar diameter: 10 [mm] - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] Cjdpfezhxk Iox Afqegw --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2003, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1 x 2 m CNC turning machine Loading magazine: LNS Tryton 112 Cgjdpfozhxkzox Afqow --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,0 x 2 m Cgsdpfszhxkuox Afqsw CNC turning machine Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS Csdsw Stndspfx Afqjgw - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: new, Siemens C98043-A1005-L2 FBG control set, unused, in sealed original packaging, 100% functional Cgjdoxahp Repfx Afqew

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm Cgsdezd Urtepfx Afqew End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Csdpfszgw Aaex Afqjgw Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Cross slide (radial + axial): 5 Longitudinal slide: 7 Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 1981, Tornos 8-spindle automatic lathe, mechanically controlled Type/Model: Tornos BS 20 Condition: Used Year of manufacture: 1981 Technical data Max. bar diameter: round 20 mm Max. bar diameter: square 15 mm Max. bar diameter: hexagonal 19 mm Max. machining length (bar feed): 60 mm Number of spindles: 8 multi-spindle Spindle speed: 20 stages from 620 to max. 6,035 rpm Number of cross slides: 8 (one per spindle) Production output: Max. up to 50 parts per minute Dimensions (L x W x H): approx. 2465 mm x 1200 mm x 1700 mm Weight: approx. 5,900 kg Equipment / Accessories: Retrofitted with 2 CNC slides in positions 3 and 6 Codpfxjzgwv Ts Afqogw Complete control cabinet overhaul Modification of the cam shaft with continuously adjustable servo drive Main spindle with spindle brake

Condition: used, Tornos CNC-controlled multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without secondary operation: 100 mm Max. part length with secondary operation: 80 mm Spindle rotation speed up to: 4000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Counter-spindle motor power: 1.1 kW Number of numerical axes: 17 Axial slide: 5 Cross slide: (radial and axial) 5 (Pos. 1 to 5) Facing slide: 1 CNC-controlled secondary operation slide with up to two secondary operation tools (Pos. 7) Connection value: 35 kW Dimensions (L x W x H): approx. 8053 mm x 1508 mm x 2210 mm Cjdpfx Afozgwtxoqsgw Weight: approx. 8500 kg Equipment/Accessories: - Control system: Tornos PNC Deko - HIRTH - Gear cutting drum locking system - Spindle stop at Pos. 4 (activated via installation curves) - 2 quick-change drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar - 3 fixed drilling units GWS Modular 40004; up to 80 bar - 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) - 7 base holders for turning tools GWS 60/41 (Göltenbodt) - Bar feeder integrated: TORNOS MSF 522/6 - Material guide channel for bar feeder - CO2 extinguishing system Kraft und Bauer - Oil treatment system Knoll: VRF 500/1550 - 2 high-pressure pumps, each 40 L/40 bar - 1 pump, 20 L/35 bar - Oil capacity approx. 2000 liters - Chip conveyor Knoll - No discharge chute

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm Cgjdezgwp Hepfx Afqow End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. Cjdpfjx D D Iksx Afqogw 2017 overhauled and two further similar machines available (both overhauled 2018), all overhauled by B&LOverhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • Directional spindle stop S1 Additional Equipment available (Pictures 17-21): • Equipment to be equipped with Robobar SSF 3 m loading magazine • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 2 different hybrid drums Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T-61796, year of manufacture 1999, FANUC control, chip conveyor, bar loader IEMCA Sir 32F, No. 98072003, year of manufacture 1998 Cedpjunvwlefx Afqsgw

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Number of spindles : 8 - Number of counter-spindles : 1 - Max. part length : 100 [mm] Cedpfx Ajzhph Djfqsgw SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 11.2 [kW] COUNTER-SPINDLE - Y stroke : 280 [mm] - Z stroke : 450 [mm] NUMERICAL AXES - 1 cross slide, position 1: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 2: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 3: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 4: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 5: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 6: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 7: x=50 [mm], Z1=80 [mm] - 1 cutting carriage 8: x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.300 x 2.200 [mm] - Machine height : 2.600 [mm] - Machine weight : 12.000 [kg] MACHINE HOURS - Number of hours under power : 75000 [h] EQUIPMENT - CNC : Fanuc 30i-TB - Hirth teeth - 1 counter-spindle in position 7 - Counter-spindle with counter-operation device - 2 x 4 counter-operation tools - 8 spindles with independent spindle speeds - C-axis on all 8 spindles and the counter-spindle : 0.001 [°] - Chips conveyor : MAYFRAN - Coolant tank * with high-pressure pump : 35 + 80 [bars] * with cooling unit for coolant - Bar loader : ROBOBAR MSF-522/8 - Oil mist extractor

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Number of spindles : 8 - Number of counter-spindles : 1 - Max. part length : 100 [mm] SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 11.2 [kW] COUNTER-SPINDLE - Y stroke : 280 [mm] - Z stroke : 450 [mm] NUMERICAL AXES - 1 cross slide, position 1: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 2: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 3: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 4: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 5: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 6: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 7: x=50 [mm], Z1=80 [mm] - 1 cutting carriage 8: x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.300 x 2.200 [mm] - Machine height : 2.600 [mm] - Machine weight : 12.000 [kg] MACHINE HOURS - Number of hours under power : 73500 [h] EQUIPMENT - CNC : Fanuc 30i-TB - Hirth teeth - 1 counter-spindle in position 7 - Counter-spindle with counter-operation device - 2 x 4 counter-operation tools - 8 spindles with independent spindle speeds - C-axis on all 8 spindles and the counter-spindle : 0.001 [°] - Chips conveyor : MAYFRAN Cedpfszhphwjx Afqjgw - Coolant tank * with high-pressure pump : 35 + 80 [bars] * with cooling unit for coolant - Bar loader : ROBOBAR MSF-522/8 - Oil mist extractor

Condition: used, TECHNICAL DETAILS - Number of axes : 18 - Number of spindles : 6 - Max. part length : 120 [mm] SPINDLES - Max. bar diameter : 8 - 25.4 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 18 [kW] NUMERICAL AXES - 1 cross slide, position 1: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 2: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 3: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 4: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 5: x=50 [mm], Z1=80 [mm] - 1 cutting carriage 6: x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 71 [kVA] WEIGHT & DIMENSIONS Cgodpszhphqjfx Afqsw - Machine floor space : 3.500 x 1.600 [mm] - Machine height : 1.950 [mm] - Machine weight : 8500 [kg] MACHINE HOURS - Number of hours under power : 72000 [h] EQUIPMENT - CNC : Fanuc 16i-TB - Hirth teeth - Counter spindle with counter-operation device - Goltenbolt turning tool holders in all positions - 5 fixed drills - 1 cutting tool holder - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : ROBOBAR MSF-522/6 - Oil mist extractor

Condition: used, TECHNICAL DETAILS - Number of axes : 18 - Number of spindles : 6 - Max. part length : 120 [mm] SPINDLES - Max. bar diameter : 8 - 25.4 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 18 [kW] NUMERICAL AXES - 1 cross slide, position 1: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 2: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 3: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 4: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 5: x=50 [mm], Z1=80 [mm] - 1 cutting carriage 6: x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 71 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.500 x 1.600 [mm] - Machine height : 1.950 [mm] - Machine weight : 8500 [kg] MACHINE HOURS - Number of hours under power : 65000 [h] Cjdjzhphkjpfx Afqsgw EQUIPMENT - CNC : Fanuc 16i-TB - Hirth teeth - Counter spindle with counter-operation device - Goltenbolt turning tool holders in all positions - 5 fixed drills - 1 cutting tool holder - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : ROBOBAR MSF-522/6 - Oil mist extractor

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW Cgodpfx Afjt Hwp Tjqsw weight of the machine ca. 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock

Condition: used, Multispindle lathe TORNOS SAS 16.6 Cgsdpfxjzhcqlj Afqew

Condition: used, Multispindle lathe TORNOS SAS16.6 Codjzhcqfopfx Afqjgw

Condition: good (used), Year of construction: 1993, functionality: fully functional, Single-spindle lathe TORNOS SAS16-DC, used, in good condition Equipment: - counter-spindle with brake - oscillating stop with counter-operation - thread cutting device - 3 independent feed systems - support and reel - bar feeder IEMCA PRA 40/33P Cgedpfex Svnuex Afqow

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding - new electrical cabinet SIEMENS or FANUC, to choose – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings Cgedpfxougl S Io Afqjw – drum bar with support – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Contact us.

Condition: used, TECHNICAL DETAILS - Bar diameter : 20 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 440 [V] Csdpeyhhxcefx Afqsgw WEIGHT & DIMENSIONS - Machine floor space : 4200x600 [mm] - Machine height : 1150 [mm] - Machine weight : 420 [kg]

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank Csdpfx Afoy Aprnoqogw - Bar loader : LNS TRYTON