Used Teas Wrap Around Evaporator for sale (2,967)

Year of construction: 2012, condition: used, Teas Wrap Around Evaporator (2012) Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dcodpfx Aez I R R Rodhon

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. Dsdpfoywclwox Adhecn The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Djdpfoz Icmkjx Adhjcn

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Dodpfx Aew T Sthedhscn Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel Djdezxtyrepfx Adhscn - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: excellent (used), Kliklok Certiwrap C150 is for wrap around sleeves for ready meal trays, tubs and pots, either individually or in a variety of multi-pack configurations Dcsdpfxoy A Rlij Adhjn

Condition: like new (used), Automatic Wrap-Around Cartoning Machine CAMA – Stainless Steel Automatic wrap-around cartoning machine CAMA, designed for the automated secondary packaging of products in cardboard boxes, forming the box directly around the product group during a continuous end-of-line process. Manufactured by CAMA, the machine integrates product feeding and grouping operations, cardboard feeding, box forming, folding, and closing, providing an automated solution for high-production industrial lines. The wrap-around system allows the packaging to be formed from a die-cut cardboard blank, wrapping the previously grouped product and creating a box ready for palletizing, storage, and distribution. MAIN FEATURES -Manufacturer: CAMA -Type: Automatic Wrap-Around Cartoning Machine -Application: Secondary packaging -Wrap-Around box forming system -Automatic product feeding -Product grouping and positioning -Automatic cardboard feeding -Box forming around the product -Automatic flap folding -Automatic box sealing system -Continuous industrial operation -Integrated conveying system -Control panel / HMI -Robust industrial construction -Perimeter enclosure with safety guards -Integrable into automated end-of-line systems PROCESS Products from the production line automatically enter the CAMA cartoning machine, where they are organized and grouped according to the configured packaging format. Simultaneously, the machine takes a die-cut cardboard blank and positions it in the forming area. The grouped product is placed on the cardboard, and through various mechanisms, it is folded around the product group. Subsequently, the flaps are closed to create a fully formed wrap-around box with the product inside. It can be integrated with: Filling and closing machines Labeling machines Conveyors Inspection systems Product grouping machines Automatic palletizers Dsdpfx Adszbid Hjhscn Pallet wrapping machines Complete end-of-line systems APPLICATIONS Particularly suitable for the food industry, canning companies, beverage manufacturers, and other packaging plants that require the automation of secondary packaging. Depending on the format and installed configuration, it can work with cans, jars, bottles, trays, packs, and other packaged products, grouping them in different configurations within cardboard boxes. CAMA's wrap-around technology provides a compact and automated solution for grouping, forming, and cartoning operations within high-production industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details - Capacity: up to 60 packs per minute - Recently packed: Dcjdjtq Dzhepfx Adhsn - 3x4 cardboard - 4x6 cardboard - 0,5 L glass bottles - 0,33 L glass bottles - Other formats possible

Condition: used, Year of construction: 2001, Overview Dcsdpfx Adey Sidvshjn This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data - Manufacturer: Kisters Maschinenbau GmbH - Model: Wrap Around Packer 420/50 - Machine Type: Wrap-around packer / secondary packaging machine - Year of Manufacture: 2001 - Capacity: up to approx. 50,000 bottles/hour - Operating Hours: 16,976 h - Application: Packaging of PET one-way bottles - Previous Use: PET one-way beverage line - Current Status: Taken out of operation due to line reconfiguration - Bottle Formats: 0.33 l, 0.355 l, 0.5 l - Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats - Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 - inkl. shrink application for trays  - Listed Formats: - 0.33 l LNB 2x12 tray - 0.355 l LN 2x12 tray - 0.33 l LNB 4x6 tray - 0.355 l KN 4x6 tray - 0.33 l LNB 3x8 tray - 0.355 l LN 3x8 tray - 0.5 l LN 4x6 tray - 0.5 l LN 6x4 tray - 0.5 l LN 4x6 KLW full carton - 0.33 l LN 4x6 loose wrap-around - 0.33 l LNB 4x6 90° tray - 0.355 l LN 4x6 90° tray - 0.33 l BA 4x6 loose wrap-around - 0.33 l BA 3x4 loose wrap-around - 0.33 l Miller 4x6 loose wrap-around - 0.33 l Salitos 4x6 loose wrap-around - 0.33 l Vichy 4x6 tray cluster - 0.33 l LN 4x6 tray cluster - 0.33 l LN LCE 4x6 full carton - 0.33 l EW 4x6 export full carton - 0.33 l EW 4x6 export tray - 0.5 l EW 4x5 loose wrap-around

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: Elite P27965, This Kliklok Certiwrap Elite was bought to wrap snack pots at high speed. It is in nearly new condition as it has not been used a great deal. Dsdpfx Aoz E N Hrsdhocn

Year of construction: 2002, condition: ready for operation (used), Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. Dcedpfx Ajh Rykujdhjn

Year of construction: 2017, condition: excellent (used), Ferrari Sistemi IM 1050 Cheese Wrapper Manufacturer: Ferrari Sistemi Model: IM 1050 Machine Type: Automatic Cheese Wrapping / Packaging Machine Country of Manufacture: Italy Application: Cheese processing and packaging Technical Description The Ferrari Sistemi IM 1050 is an industrial automatic cheese wrapping machine designed for the packaging of cheese products within an automated or semi-automated cheese processing line. Dedpfxoz Dvl Ee Adhocn The machine is suitable for use in dairy and cheese-processing environments and is designed for continuous industrial operation. Its stainless-steel construction and food-processing design make it suitable for hygienic cheese production and packaging applications. Individual piece or complete cut & pack room available Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010

Condition: used, Year of construction: 2011, capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14 Dodpfx Asz Ibqnodhocn Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 8 motor height adjustment: yes speed adjusment: frequence converter

Condition: excellent (used), Year of construction: 2021, Semi-Automatic and Fully Automatic Pallet Wrapping Machine Dedewb A N Repfx Adhscn Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operation: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production Speed: Up to 35 loads per hour. Load Capacity: Maximum dynamic load weight: 4,500 lbs – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck for turntable protection, 3-sided loading, and pit mounting. Forklift openings at the front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation Features: Fully electric – no pneumatics required. Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It provides significant productivity increases and safety benefits. This technology is only available on Cousins machines. This unique method of attaching and cutting the stretch film offers the following advantages: • Selectable top wrap function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are required to power the turntable, reducing maintenance. • Load placement on the turntable is not critical. • No air connections or noisy compressors • New automatic safety feature for load detection during the first revolution detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions. • A-arm fall protection Control Functions: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the center of the wrap Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or shiny loads Separate control for 1 to 12 revolutions of the upper and lower wrap Selectable parameters for reduced film tension for overwrap.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change Djdpfxsz Inapj Adhjcn F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2019, condition: new, Wraparound heat-shinkable MIS - 65 1120 - 650 CW BK/T SP Dsdpfx Adoih R Icehocn 127030 - 12200650026-040 Prize per unit carton

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Dodpfx Adsz Inavshscn F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Dcsdozvllbjpfx Adhon

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) Dcodpjz Iq Trefx Adhsn - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Dcodpfx Aez Ipdcsdhen Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting Djdpez Indusfx Adhjcn F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Dsdsy Dgq Dopfx Adhjcn

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Djdeqrpd Sopfx Adhscn Weight: 66 kg.

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Dcjdpov T D D Uefx Adhon Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser ⦁ Degasser The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Dcedpfx Adexv Af Sshsn Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Specifications Performance: Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...