Used Smyth Freccia F150 - 4D Large for sale (7,356)

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Njdpfezpfiysx Ahujcw Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: used, Year of construction: 1980, machine/vehicle number: 409, Buchdeckenmaschine - Bucheinhängemaschine - Case Maker Smyth Freccia CMYear ca. 1980 - Serial-No. 409 Cover format (open cover) max. 110 x 155mm Cover format (open cover) min. 405 x 560mm Backlining width max. 8mm Ncsdpfxeh Axc Se Ahusw Backlining width min. 95mm Mechanical speed max. up to 30 covers/min. Automatic Case maker Automatic Turning-In Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Ncsdpfx Ahjxdmxleuew

Condition: used, Year of construction: 1992, machine/vehicle number: 209, Automatische Fadenheftmaschine - Automatic Sewing machine - Large Size Smyth F 150 LYear 1992 - Serial-No. 0209 Signature size min. 80mm - 135mm Nodpfx Aoh Axawehuocw Signature size max. 560mm - 340mm Number of Stitch 13 Mech. Speed up to 150 cycles/min. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), REF: MM6212 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Ncedpexd U Inofx Ahusw Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅ Overall dimensions - 4.3m long x 740mm wide x 2.6m high.

Condition: excellent (used), For sale: a Carl Beckwoldt CB 00-63 N/4D geared motor with a three-phase electric motor, 0.18 kW. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good, with normal signs of wear consistent with its use. The robust construction makes it suitable for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: Carl Beckwoldt Type: CB 00-63 N/4D Motor power: 0.18 kW Power supply: 3× 220Δ / 380Y V Current: 1.06 / 0.61 A Njdpfxjznww Ts Ahuscw Frequency: 50 Hz Output speed: 39 rpm Protection rating: IP54 Insulation class: B Power factor: cos φ 0.75 Standard: VDE 0530 Country of manufacture: Germany

Condition: used, Year of construction: 2000, functionality: fully functional, Smyth Sewing Machine 160 Maximum Mechanical Speed: 10,800 cycles/hour Min. Signature Size: 80 x 135 mm (off-line) Max. Signature Size: 320 x 420 mm (off-line) Number of Sewing Stitches: 8 Sewing Stitch Length: 24 mm Power Consumption: 4 kW Standard Voltage: 400V–50Hz, 3Ph Max. Air Consumption: 200 Nl/min at 6 bar Nedpfjxzzrusx Ahuscw Total Weight: 2500 Kg Machine Dimensions (L x W x H): 1.7 x 2.67 x 1.7 mt

Condition: ready for operation (used), Year of construction: 1984, BOOK SEWING MACHINE SMYTH + HEADOP MODEL 55 Nsdsyk Epqspfx Ahuecw -Automatic book sewing machine model 55, Year 1984 -Headop feeder, max size : 550X320 mm, min size : 150 x 80 mm. -Max mechanical speed: 125 signatures per minute -6+1 -Complete with manuals, external air pump, repairs and accessories -Available immediately

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Nsdpfszlg E Isx Ahuecw Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Grounding bolt Cables in UL design

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: Ncsdpfsdy Hm Njx Ahusw 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, Year of construction: 1989, functionality: fully functional, input voltage: 380 V, total length: 10,210 mm, total width: 2,717 mm, year of last overhaul: 2025, input current: 12 A, conveyor belt width: 1,700 mm, product height (max.): 1,370 mm, input frequency: 50 Hz, table width: 1,828 mm, table length: 1,500 mm, We offer this used SVECIA SM Svecia SM Automatic large format, year of construction 1989. Manufacturing year: 1989 year Ncjdszgfh Rjpfx Ahujw Type: SM Serial number: 40-90257 Wiring diagram: 40E1864 Voltage: 380 V Current: 12 A Control voltage: 220 V Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ncedpfx Aju Ixt Dehuew

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Ncjdpfju Ixkpox Ahuow

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz Nedpfxsy Awy Hj Ahujcw

Condition: good (used), Year of construction: 2008, Seydelmann K754 vacuum and cooking bowl cutter direct from closed pate factory. Bought new in 2008. We can demonstrate the machine running. Nsdjqgfamopfx Ahuocw

Condition: good (used), Direct from closed potato factory. Nodpfx Ahewtnk Rjuecw

Condition: good (used), Direct from closed food factory. Dimensions to follow. Ncodpfx Aetp Nz Eehusw

Condition: excellent (used), Year of construction: 2019, 2 units in stock, both were only in use for a short contract. Loading basket 1600mm by 800mm Programmable controls. Ncodpsramamsfx Ahujw

Condition: like new (used), Year of construction: 2021, Machine bought new in 2022 and hardly used. It literally still looks brand new. Rare opportunity. Njdpfxsv Hfg Ro Ahujcw

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Nsdpferdzbtex Ahujcw

Year of construction: 2022, condition: new, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm, Scoring unit, Swiveling, Extension table, Angle/miter fence, Automatic brake, Lowerable below table height Ncodpfx Ahjihahmeusw ----- Technical data ----- Swivel range: 0 - 45°, Cutting width at parallel fence: 1,000 mm, Max. cutting height: 87 mm, Max. saw blade diameter: 315 mm, Swivel range for miter fence: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 hp / 4 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Dust extraction port diameter: 1 x 100 / 50 mm each, Weight: 450 kg Large dust extraction hood Location: Available in stock, 54634 Bitburg - immediately available - Location: Available in stock, 54634 Bitburg - ready for loading - - immediately available -

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) Ncodpfx Aevpalaohuew ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: Nodpfx Ahjy H Akrjujcw The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 3 h, load capacity: 5,000 kg, lifting height: 5,560 mm, free lift: 1,840 mm, fuel type: diesel, mast type: triplex, construction height: 2,900 mm, fork carriage width: 1,700 mm, fork length: 2,000 mm, empty load weight: 8,436 kg, total length: 3,850 mm, drive type: Diesel, construction width: 2,100 mm, Rough-terrain forklift Ncedpfxjzk R Htj Ahuow Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tire type: Pneumatic Front tire size: 340/80R20 Rear tire type: Pneumatic Rear tire size: 340/80R18 Description: In addition to this Manitou model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options are available at favorable terms. We are also happy to buy your used forklift outright, even if you don't purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this M50-4D model. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons and up. We would also be happy to offer your vehicle for consignment sale. Side shifter, Heater, full cab, full free lift, 4x4

Year of construction: 2004, condition: excellent (used), Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 Njdpfx Ahsiqpx Neuocw -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg