Used Smt Drehbank 80001350 for sale (137)

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Kdsdpjhw Emqjfx Aiaet Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2012, condition: ready for operation (used), An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible. Kdedpfxsznx H Ne Aiast

Year of construction: 2018, condition: used, Operational machine with maintenance history. Kdedoyxfzkspfx Aiaet Ask for additional information!

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Kdjdpew Hfp Refx Aiajt Ask for additional information. Located within EU.

Condition: used, PCB handling equipment from E-Flex SMT microsystems: WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 Kdedpfx Aijx Tzn Aeaet WHM-200SD3TM-IA (2022) price: €3,439 WHM-200SD3TM-l (2022) price: €3,738

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,200 mm, total length: 1,500 mm, total height: 1,180 mm, overall weight: 150 kg, Sorting cart, 4 pieces Price is per piece!!! Description: max. 1500 kg 50 compartments Kdedezv Hzqopfx Aiaet max. 12 mm 4 wheels (steering wheels)

Condition: used, functionality: fully functional, Weiler lathe Location: Bad Tölz Kdsdpfezv Smlex Aiast Inspections are welcome. We have other used machines available. Please feel free to contact us.

Condition: as good as new (ex-display), Year of construction: 2012, ⭐ PREMIUM LOW-HOURS BORING MILL — READY FOR IMMEDIATE USE ⭐ Bohrwerk SCHIESS SMT BMT 130 (2012) | Low Hours (~10k) | Heidenhain iTNC 530 | Ball Bar Tested ​Description: ​PREMIUM OFFER: LOW HOURS & VERIFIED GEOMETRY ​The Opportunity: You are looking at a Schiess SMT BMT-130 (Year 2012) with a transparent history of light usage. With only ~10,000 Spindle Hours (and 8,900 Program Run Hours), this machine has averaged less than 1 shift per day since new. It is NOT a tired production machine. ​✅ JUST COMPLETED (Ready for Inspection): ​Geometry Verified: Passed the Renishaw Ball Bar Test with excellent results (Proof of precision available). ​Aesthetics: Professional Fresh Paint applied. The machine looks excellent. ​Functionality: Automatic Tool Changer (ATC) fully serviced and tested. ​TECHNICAL DATA (Verified on Screen): ​Control: Heidenhain iTNC 530 ​Spindle Time: approx. 10,090 h ​Program Run: approx. 8,900 h ​Spindle Diameter: 130 mm (ISO 50) ​WHY BUY THIS MACHINE? ​Authentic Condition: The low hours are genuine and verified by the control unit. ​Ready to Work: Geometry checked, ATC working, looking great. ​Price: At €230,000, it offers the best Price/Performance ratio on the market for a 2012 machine. ​VIDEO PROOF by request Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Table loading capacity - 12.000kg General dimensions - 6800x6300x4600mm Kodpfx Aopa N Uhoiajdt Machine Weight - 35000kg

Condition: excellent (used), functionality: fully functional, Georgian bar assembly table Complete In very good and clean condition Good working order, tested Kodsztyw Tjpfx Aiasdt As it is Available immediately

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Kdjdpfxozlx E Ts Aiaet Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, functionality: fully functional, Year of construction: 1988, Schechtl guillotine shear Kdodpfxsy I Uulo Aiast With signs of use, but operates flawlessly

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Ksdpfx Aieq I Sgyeasdt

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Kodpfx Aotz Dkaoiajdt

Condition: used, functionality: fully functional, Grinder for mincing meat Kdodpfx Aoxrhbkeiajt Manufacturer: Sind Voltage: 380 / 50Hz Power: 15kW Size: 1550x900x1300mm Weight: 493kg

Condition: used, functionality: fully functional, Grinder for mincing meat Kodpfxjxrhbds Aiaodt Manufacturer: Sind Voltage: 380V / 50Hz Power: 11kW Size: 1250x800x1110mm Weight: 319kg

Year of construction: 2012, condition: used, Operational unit! Ask for additional information! Kdjdpfx Asy Ud E Teiaot

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Kedsy R Dc Depfx Aiaedt Ask for additional information!

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Kodpjw Ty Hcofx Aiajdt Ask for specification!

Condition: used, Year of construction: 2014, Working condition machines. Comes with a small patch of feeders. Kjdpfx Aiszzmplsajdt

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Kodoy Axcvopfx Aiaodt Year of manufacture: 2013 Machine type: SMT placement line Available from the end of July 2026. We are happy to assist with dismantling and loading by a local specialist company. If you have any questions or need further information, please do not hesitate to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 1,650 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, faceplate diameter: 2,000 mm, SMTCL (Shenyang No.1 Machine Tool Works) CW61200 universal horizontal center lathe, year of construction 2005, made in China. The bed ways are in good condition and the machine is in active production use. Technical data: - Faceplate / chuck diameter: 2,000 mm - Turning diameter over bed: 2,000 mm - Turning diameter over cross slide: 1,650 mm Kedpfxoz Anxqo Aiaedt - Turning length / machining capacity: 8,000 mm (8 m) Equipment: - 2 x standard steady rest - 1 x heavy-duty steady rest - Digital readout (DRO), retrofitted by us In good working order and ready for immediate delivery.

Condition: used, Meat grinding machine Kodpfx Asxrhfpoiaedt Manufacturer: Sind Voltage: 380V / 50Hz

Year of construction: 2007, condition: used, X2 machine (Revolver head 12 + dubble twin heads) 2007/2008 year of many factory incl 4 tables. This machine has to be dismounthed to get out of the factory (Input and out conveyer, some has to do it) and there is also feeders incl in the package as follows hear under. Here it is a line computer with program incl. in the price. Feeder 00141088-01 – 26 stk ( 3 tape ) Feeder 00141092-04 – 13 stk Feeder 00141092-05 – 4 stk Feeder 00141094-03 – 1stk Kdedpfx Aijzzc A Ueajt

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: - Turning diameter over bed: 700 mm - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) - Control: FANUC (original) Kedpfx Aijz An Rysajdt Can be inspected under power in our workshop and is ready for immediate delivery.

Year of construction: 2017, condition: used, Maximum placement speed: 16,000 components/hour IPC net placement speed: 13,800 components/hour Placement system: HYDRA Tools: 8 Max. component dimensions (X/Y/Z): 56 / 56 / 15 mm Max. component weight: 140 g Min. PCB size (X/Y): 70 / 50 mm Max. PCB size with T3 (X/Y): 443 / 508 mm Min./max. PCB thickness: 0.4 / 6 mm Max. PCB weight with T3: 5 kg Feeder capacity with T3: 112 × 8 mm feeder positions Conveyor height range: 880–975 mm Operating hours: approx. 7000 h Placement time: approx. 3000 Kdedpezzlq Ujfx Aiaet