Used Schuler Hydraulic Press With 500 T Pressing Force for sale (90,707)

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: H/7529, functionality: fully functional, operating hours: 32,769 h, pressing force: 500 t, stroke length: 800 mm, table width: 2,400 mm, table length: 1,300 mm, TECHNICAL DETAILS Press force: 500 t Table area: 2,400 x 1,300 mm Pedal area: 2,400 x 1,300 mm Stroke: 800 mm Max. stroke length: 830 mm Control system: Siemens S7-400 Installation height: 400 mm/min Working speed: 25 - 60 mm/s Closing speed: 500 mm/s Rapid traverse up: 450 mm/s Bodpfjwa S R Isx Alcslh Mold base area: min. 1,400 x 900 mm Mold base area: max. 2,300 x 1,200 mm Mold weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Power: 255 kW Rated current: 435 A Voltage: 400 V Frequency: 50 Hz Hydraulic pressure: 255 bar Oil volume: 3700 l

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Bodpfx Asy Urvaolcslh Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Blodpfoy S Rqwsx Alcoh Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Bljdpfxeph Uk No Alcsh Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Bledpfxsgrkigo Alceh Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Bledpogrki Sefx Alceh Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Bsdpfxsia Nc To Alcelh Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: used, Year of construction: 2002, Italpresse BG/660 Molding press / Heated platen press – 660 t pressing force Manufacturer: Italpresse Model: BG/660 Year of manufacture: 2002 Condition: Used, operational Technical data * Pressing force: 660 t Bedpoy Ufqdofx Alcslh * Press platen size: 1,900 x 1,600 mm * Heating power: 31 kW * Connected power: 108 kW * Operating voltage: 400 V * Control voltage: 220 V * Frequency: 50 Hz * Phases: 3 + N + PE * Rated current: 160 A * Weight: approx. 28,000 kg * Design: Bottom platen heated platen press / Molding press Robust hydraulic molding press from Italpresse for the production of molded parts and glued wood components. The machine has heated press platens and a pressing force of 660 tons. Ideal for applications in the furniture, wood, and molding industries. The press is in used condition. Inspection possible by appointment. Documentation available.

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press dimensions: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electro-hydraulic, 4 cylinders Robust construction Bsdpfxeyu Sifs Alcjlh Ideal for veneer work and panel gluing Gold anodised plates Ex location The machine is in good and well-maintained condition, appropriate for its age. Solid industrial quality – durable and reliable. Delivery available at extra cost! Due to the age of this used machine, warranty is excluded when selling to commercial customers.

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Table size: 1050x800mm Bjdpfxsuhl E Rj Alcelh Stroke length: 400mm

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the angled beam - Hydraulic cylinder with lateral ball bearing, adjustable, stroke 120 mm - Total and individual cylinder control Bledpfeygwp Uex Alcoh Included in delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders can be switched off individually, 1 cylinder for adjusting the pressure beam, control panel for two operations, pressure gauge and pressure regulator, hydraulic unit, oil tank and hoses, - 220/380 Volt, - Pressing width 1800 mm - Pressing height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg Transport available at extra cost!

Condition: good (used), Year of construction: 2012, functionality: fully functional, pressing force: 150 t, overall weight: 1,400 kg, Equipment: CE marking, We are offering this quality Sahinler 1020-150 workshop press, hydraulic press, 150 tons, year of manufacture 2012. - Adjustment of closing stroke with fine tuning - Table height adjustable - Automatic pressure cut-off at set pressure - Separate 2-hand control panel - Table plate with T-slots for T-nuts - Ram plate with slots - 2 machine guide columns for the upper ram plate Fully functional The machine can be demonstrated on site Hardly used, only for prototype production Single owner Dimensions as per data sheet Loading on site possible. Weight approx. 1.4 t Original price approx. €21,000 net No warranty or guarantee Bedpfeyzl Amsx Alcolh If you have any questions or require more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, This is a hydraulic tube forming press manufactured by EMS (now Numalliance). Designed for horizontal forming of tube bodies with a pressing force of 40 t. For simple and ergonomic tool changes, a crane is integrated into the machine (see photos). The forming press is fully functional and can be inspected on site. Bedpfjygv Tlsx Alcjlh

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec Bljdpfex N T H Ajx Alcoh - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,400 mm, retraction force: 500 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1500/500 Bsdpfx Aex N Ukijlcslh H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long-lasting operation in high-tonnage deep drawing applications requiring large bolster dimensions. Thanks to the 8-guide H-frame body, the ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, with 1500-ton main ram and 500-ton blank holder capacity, is developed for large-dimension dies, deep drawing, and precise forming operations. The vibration stress-relieved welded steel frame delivers high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame design • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic contamination warning for the filter • Monitoring of hydraulic oil temperature and system status via display • Off-line filtering and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame design Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 175 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description Bedpfex N Uhujx Alcolh The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The 8-guide H-frame construction provides maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 500/175 model features a 500-ton main ram and a 175-ton cushion ram (pot), designed to deliver complete control over the die and workpiece for high-tonnage deep drawing and forming operations. The machine frame is stress-relieved by vibration to ensure a durable and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert - Monitoring of hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Integrated operator safety systems - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMIR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 500 Ton - Capacity (Cushion): 175 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures monitored by “welding coordination engineers” certified under EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Approach Speed: 150 mm/s - Moving Table Forming Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø500 mm – Ck45 - Cushion Cylinder Bore: Ø300 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 26 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Bsdpeu Axfcefx Alcelh Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr Bljdpfxotndu Ue Alcoh FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Bodpowq Sz Uofx Alcslh Capacity 500 LTS Load cells Mixer Ancillary equipment included

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Bljdpoxwk E Asfx Alcoh Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: good (used), mileage: 934,288 km, power: 368 kW (500.34 HP), first registration: 04/2014, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 12,600 kg, Year of construction: 2014, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, navigation system, parking heater, power mirror, traction control, Technical information Number of cylinders: 6 Bledoy Rukrepfx Alcoh Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Max. axle load: 7100 kg; Steering; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 12600 kg; Suspension: air suspension Weights Empty weight: 7.660 kg Carrying capacity: 11.340 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Climate control - Differential Lock - Heated Mirrors - hydraulic - Hydraulic installation - PTO - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Speed limiter - Vehicle heater - Visor

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Blodpfx Alsywi Daeceh

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Bljdpfxsy Tu Txe Alceh Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Blodeyaik Dopfx Alceh Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Bodpfx Ajv Sd S Njlcolh Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.