Used Scheuch Cyclone for sale (241)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Dedpfx Aszlktpsa Hokt Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Pipes and elbows (3 truckloads) Number of pieces – see listing Further information gladly provided via email or phone! Djdpfxjy Iznxo Aa Hokt

Condition: excellent (used), Year of construction: 2020, Used MS Sand Plant Dedpfxszx Hrue Aa Hjkt Year 2020 Made In France Consists Of 2 x Dewatering Screens, Coarse Sand Cyclone, Fines Cyclone Dewatering Screens Are Each 12ft x 6ft Complete With Electric Motors, Pumps, Pipework, Handrails, Framework Excellent Condition This Is A Serious Sand Plant. Built To Handle Large TPH

Year of construction: 2007, condition: excellent (used), 1 radial fan with pre-shaft and cooling disc for hot and dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure increase: 1673 Pascal at 250°C (0.637 kg/m³) Speed: 1460 rpm Shaft power: 40.5 kW Weight: kg Year of manufacture: 2007 Insulation with rock wool and galvanized sheet metal. Dimensions: Length: 3250 mm Width: 2400 mm Height: 2000 mm Dedpfx Aokvpfhsa Hekt Inlet diameter: 750 / 980 mm Shaft height without spring buffer: Outlet dimensions: 980 x 780 mm including compensator for the outlet side. No damage or wear. Only the color on the inside has faded due to the heat.

Condition: used, This listing is for the Clifton Cyclone Vortex Mixer Dodpfx Asxv Azmoa Hskt The unit is in full working condition and is ready for immediate use The Clifton Cyclone Vortex Mixer is a high-performance laboratory device engineered for rapid and efficient mixing of liquids in test tubes and small vessels. It creates a powerful vortex in the tube, enabling highly effective and uniform mixing without the need for stirring rods or manual agitation.

Condition: excellent (used), Year of construction: 2023, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: WMMB848473934932, 2023 AIRTERM BIO - 500KW BOILER Complete with the following equipment 500 KW Bio Boiler 4 bar working pressure 110 degree working temperature Twig 500 Kw Biomass Burner Ultra Modern Control system 4 Meter Endress Fuel Discharge system Multi Cyclone Djdpoy Ip Awofx Aa Hekt Flue Gas Fan Boiler in perfect working condition and can be viewed at any time. Boiler is been replaced with larger boiler and will become available in September 2026

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm Dsdpsh Unhnefx Aa Hokt If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Air capacity: 15 300 m3/h Engine power: 30 kW Static pressure: 3059 Pa Dkedpfevazfvex Aa Hst Speed: 2340 rpm

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Dkjdpfx Ajvbdyxoa Hjt Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), 1 x Weighing and Bagging System Comprising of: - VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Djdpfx Aaezgc H Do Hjkt Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: good (used), Year of construction: 2017, Insulated cyclone by GEA, model CYCLONE CHE 394. Year 2017. With 2 reinforcement brackets. Bottom outlet DN100. Top inlet Clamp 1". Side inlets Clamp 1" and 4". Dkjdpfx Aaey Hfxrs Het No documentation available. Cyclone dimensions: Length: 650 mm Width: 560 mm Height: 1510 mm

Condition: like new (used), Year of construction: 2026, Cyclone separator / extraction system in a robust, welded design optional: rotary valve fan piping steel frame Dksdpfxsztzmvj Aa Hot please specify the required air flow rate in m³/h when requesting a quote.

Year of construction: 1992, condition: good (used), Air capacity: 30,400 m3 / h Engine power: 33 kW Dsdpsh A Rrrjfx Aa Hekt Static pressure: 3100 Pa Speed: 1600 rpm

Condition: used, functionality: unexamined, machine/vehicle number: siehe Beschreibung, Dust extraction system: - 57,000 m³/h - Bag filter type RTFAE550S-JET-SF (without filter bags, the old ones have been disposed of) - Screw conveyor type TRFS400ATEX - Rotary valve type RTZ5050ATEX-S-CR-SEW - Cyclone type RTZA2500-D - Baffle silencer - Compressed air compressors + tank type ALUP Largo 15, 15 kW motor Dkjdpfjy Rzihsx Aa Hot

Year of construction: 2020, condition: refurbished (used), Dear customers, To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Dsdjftb Ebspfx Aa Hekt Operating pressure +/- 5000 Pa

Condition: used, Year of construction: 2020, functionality: unexamined, Zhengzhou A/X Machinery waste wood processing plant comprising: AS-1200 hopper fed 5 ton per hour double shaft pallet shredder magnetic belt cross conveyor 2m 6m incline conveyor 3T Shredder Complete with Y2805-4 75kw drive motor Sawdust 11kw fan blower & cyclone hopper with sawdust collection bin screw elevator conveyor HT Furnace HGJ.3 sawdust dryer 11kw with Nu-wy B55-2H 135-800kw x 182 degC burner 4-vertical column gradual heat transfer chamber drying system 4-zone dryer controls & secondary drive fan 11kw Dksdpfx Aozx Tfzja Het 5m incline conveyor 3m incline conveyor cylindrical glue bin with IBC Weighcell, Greaves spiral mixer agitator 6m incline 4kw motor screw conveyor 2 - 3m horizontal screw conveyor 4m horizontal screw conveyor

Condition: used, Manufacturer : Venti Oelde Dsdpfx Aozwxzrea Hskt Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Suction side: 400 mm Height: 5853 mm Diameter: 1695 mm Year: 2013

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Dkodjh Tfqhjpfx Aa Hot Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: as good as new (ex-display), I will sell a mill with a rotor from Retsch Condition as new. The mill with a rotor TWISTER was designed specifically for preparing a food sample (e.g. feed) for NIR analysis. The optimal shape of the rotor and grinding chamber leads to the generation of an air stream that transports the ground material to the integrated cyclone with a sample bottle. The air stream protects the sample from heating, which means grinding without losing moisture. Supplied with the device, they guarantee optimal grinding, so there is no need to recalibrate the NIR spectrometer. It is possible to choose one of three rotor speeds to perfectly adapt the device to the application requirements. Cleaning the mill is quick and easy because the air flow leads to the complete removal of material from the grinding chamber. This is another RETSCH cyclone mill that guarantees the highest level of sample preparation and reproducible milling results for NIR analysis, making the analysis itself reliable and its results repeatable. Dodpfjrvxqxox Aa Hokt APPLICATION EXAMPLES feed, corn, pasta, feed, pharmaceutical products, rice, soy, tobacco, cereals, ... PRODUCT ADVANTAGES ideal for grinding feed, cereals, grains and other similar products 3 adjustable speeds cyclone separator with 250 ml bottle for quick sample collection no sample contamination thanks to easy and quick cleaning convenient control panel 900 W long-life motor Applications grinding for NIR analysis Fields of application medicine / pharmacy, agriculture, food / feed Input material fibrous, soft Principle of operation pressure, friction Input size* < 10 mm Final fineness* < 250 µm input size / material quantity* < 250 ml Speed setting 10 rpm Rotor speed 52 / 62 / 72 m/s Rotor diameter 98.5 mm Sieve sizes 1 mm / 2 mm Drive linear motor Drive power 900 W Electrical data various supply voltages Mains connection 1-phase W x H x D in closed position 449 x 427 x 283 mm Net weight kg Standards / Standards CE

Condition: excellent (used), Kongskilde cyclone separator with rotary valve For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. Djdpfxozrlzns Aa Hokt This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: ready for operation (used), * Brand: Schauenburg * Model: cyclone * Length: 3100 mm * Diameter: 880 mm Dsdpfx Aeywmptja Hskt * On stock: 3 pieces.

Condition: ready for operation (used), * Brand: Sotres * Model: dewatering screen with cyclone. * Dim. screen surface: 2800 x 1100 mm * Screen opening: 12 x 1 mm * with: two pieces vibration motors of each 2 kW * Incl.: springs. Dodpfx Aaeywmv Ho Hskt * Dim. cyclone: length 3500 mm, diameter 1100 mm. * incl.: steel construction * incl.: tank * incl.: Warman pump with e-motor , type 8/6.

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Dksdpfx Aex Upqhea Het Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Djdpfx Aaexrdhas Hokt Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DC3000 Cyclone Dust Collector – Advanced Sawdust and Dust Extraction System The CORMAK DC3000 is an advanced cyclone dust extraction system designed for intensive dust collection processes in woodworking, furniture manufacturing, and metalworking industries. Thanks to its modern cyclone separator, powerful centrifugal sawdust fan, and dual filtration system, the unit efficiently removes both coarse and fine dust particles from the air. The DC3000 sawdust extractor is equipped with an automatic filter cleaning system, ensuring consistent performance and reduced maintenance requirements. Key advantages Automatic filter cleaning system – maintains constant extraction efficiency and reduces downtime. Cyclone separator – effectively separates larger dust particles before they reach the main filter. High-performance centrifugal fan – provides strong suction with low operating noise. Dual filtration system – suitable for both dry and damp sawdust applications. Compact and mobile design – equipped with a durable metal waste container for convenient operation. Precision sealing system – airtight connections ensure high vacuum performance. Construction and technology The CORMAK DC3000 is equipped with a powerful 3 kW three-phase motor (400 V) operating at 2,800 rpm. The centrifugal fan generates high vacuum pressure, enabling efficient extraction even from multiple suction points. An integrated pressure gauge allows real-time monitoring of filter condition and system performance. The cyclone separator reduces the load on the main filter by removing heavier particles before filtration, extending filter life and improving overall efficiency. Precision and performance The cyclone separation system effectively removes larger contaminants, significantly reducing filter clogging. With an extraction capacity of up to 7,000 m³/h, the DC3000 provides efficient operation in multi-point extraction systems and high-dust environments. The combination of two collection containers and four transport wheels improves functionality, mobility, and ease of operation in industrial environments. Applications The CORMAK DC3000 dust extraction system is suitable for: woodworking plants and sawmills furniture manufacturing and flooring industries workshops processing soft metals building material warehouses with high dust levels Standard equipment Automatic filter shaker system Pressure gauge Dual filtration system (pre-filter and main filter) Metal container under the cyclone separator Transport wheels Optional equipment Dkedpfowwtz Nox Aa Het Additional suction outlets with different diameters Pipe distribution systems for workshop-wide extraction networks Protective filter covers Technical specifications Parameter Value Extraction capacity 2,000 – 7,000 m³/h Noise level 75 dB Fan speed 2,800 rpm Suction connections 3 × Ø100 mm / 1 × Ø200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions (L × W × H) 1300 × 1000 × 2200 mm Weight 219 kg