Used Road Marking Machine - Striping Machine. for sale (69,703)

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Our machine enables the execution of all basic tasks for road marking. It features a line programmer and also offers the possibility of marking edge lines and adjusting the operator’s seat. The machine can be equipped with up to five automatic spray guns for paint and five guns for glass beads. It has paint tanks with a capacity of 192 kg and two 40 kg tanks for glass beads. Self-propelled machine with its own drive system. Line programmer. Pressure system for applying glass beads. The machine is equipped with: three automatic paint spray guns or one applicator for two-component material; three automatic guns for glass beads; one hand gun. Hydrodynamic paint spray system (airless) or dosing system for two-component material in a mixing ratio of 98:2. Two paint tanks, each with a capacity of 60 liters. Lodpfez Tdykjx Akwoah Pressure system for glass beads with two tanks, each with a capacity of 25 liters. KOHLER drive engine with 25 hp. Hydraulic drive for the paint pump. Paint pump flow rate: 11 l/min. Maximum operating pressure: 228 bar. One nozzle for the hand gun. Three nozzles for marking lines with a width of 12 cm. One nozzle for marking lines with a width of 24 cm. 250 g of oil for the pump piston rod. Three nozzle guards. High-pressure filter with a filter fineness of 50 mesh. Pneumatically raised targeting pointer for aligning the marking. Marking unit mounted on a wheel, which is pneumatically pressed onto the road surface.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: M166011 01 G21C, The LineLazer V 250SPS model with paint guns is a self-propelled solvent painting machine with reflective beads designed for large and heavy striping jobs, including painting parking lots and roadways. Pressurised bead system:  Excellent bead application performance  Ensures proper flow of beads Automatic paint gun system Lsdpfxet Dlmbo Akwoah  Quality solenoid driven system Remote control control box  Easy to use and highly visible in all conditions 25 gallon paint tank  Less refills  Extended stripping time with high capacity hopper Honda® GX engine  Reliable and easy to start  Oil alarm stops engine to prevent damage if oil level drops too low Electric start  Quick start EasyMark gun adjustment system  Easy gun adjustments  Easy gun adjustment every time  2 gun capability with QuikSelect gun selector Use of front or rear holster Self-centering front wheel  Simple operation  Foam-filled, three-wheel design for stability Additional features  Easy steering adjustment  Durable Chromex pump  High efficiency hydraulic motor  High capacity cooling system  Easy Out pump filter

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, operation weight: 1,900 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 2003, operating hours: 1,768 h, Equipment: onboard computer, Road Marking Machine: + Euroliners + Trassar 201A Lajdoyhd E Sjpfx Akwsh + Year of manufacture: 10/2003 + 1,768 operating hours + 1,900 kg + 3-cylinder diesel engine, 36 hp + Hydrostatic drive + Articulated steering + Protective roof + Rear warning device + 2 bead containers of 130 L each + 2 paint tanks + bracket for a third tank on the right + Airless pump + Compressor + Guide rod and spray boom hydraulically adjustable + Machine from municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and changes excepted, subject to prior sale!

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Ledpfxexal A Ue Akweah Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: white, Year of construction: 1992, operating hours: 4,470 h, Equipment: air conditioning, cabin, Line marking machine: + Euroliners + Bagheera + Year of manufacture: 1992 + 4,470 operating hours + Vehicle base: Hansa APZ 1003H + Optional 4-wheel steering + Hydrostatic drive + 4-cylinder Mercedes diesel engine + Hand sprayer at the rear + 2x paint tanks + 2x bead tanks + Bead and paint spraying + Sight rod with mirror + Compressor + Airless pump Lsdpfow T Tkbsx Akweah + Line marking computer elexar 20 + Rear warning system + Air conditioning + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos may occur, interim sale reserved!

Condition: good (used), Brand: Videojet Type: Inkjet Marking Machine Model: Excel 2000 Lodpfx Akoyt Hmpowoah

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen Ledpfxsz Sm Sho Akwoah W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) - Cooling: forced air – no external chiller required Lajdezw U T Ropfx Akwsh - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Lsdpfoz Slprex Akwsah Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: BS-21012, For sale: LASERVALL laser system with a rotary indexing unit (C-axis) - Type: Laservall PH70 - Model: BOX SOL – OWIO 20 EMK - Serial No.: BS 21012 - Year of manufacture: 2021 Ljdpfx Ajz Iytzokwjah - Power: 23 W The laser enables marking on various materials, including metals, plastics, ceramics, glass, and stone. It allows for marking on both flat and cylindrical surfaces, as it is equipped with a rotary indexing unit featuring a three-jaw chuck and a simultaneously controlled C-axis. All electronics, the entire software system, and the laser tube were replaced in 2021. The unit has seen very little use and is practically new. It is connected to the power supply and ready for operation.

Condition: used, functionality: fully functional, power: 6 kW (8.16 HP), gearing type: hydrostat, fuel type: gasoline, color: blue, Road marking machine: + Graco + LineLazer IV 250SPS + Paint tank / Bead container + Parallel spray: 2x spray nozzles / 2 bead dispensers + Hand spray unit + Hydraulic drive, self-propelled forward/reverse + Airless pump Laedpfx Aow Svqzokweh + Honda GX 270 engine, 8.4 HP Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and typos possible, prior sale reserved!

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Ledpfx Aoxxb Rrekweah

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1720266, Equipment: CE marking, Uhlmann Serialization Platform (USP) and Uhlmann line controller equipped with track & trace software. Lasdpfx Aoy D Nkyekwsh Manufactured in 2017, this equipment has been utilized for printing variable data, including 2D matrix codes, onto sealed and packed cartons in a cleanroom environment. Serialization coding and setup of variable data are managed via the line controller and then downloaded to the USP. The USP operates as a standalone unit with a left-to-right product flow. The process steps are as follows: - Closed cartons are received via conveyor belts - Variable data is printed using two Wolke inkjet print cassettes - The printed data is verified by a vision inspection system - Cartons rejected by the vision system are automatically ejected using compressed air - Approved cartons proceed to the outfeed conveyor Uhlmann support is required for configuring and operating the equipment as a serialization station. Carton specifications: - Minimum size: 30 x 15 x 65 mm - Maximum size: 130 x 105 x 250 mm - Maximum weight: 300 g - Conveyor speed: up to 60 m/min - Working height: 815–950 mm

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed Lasdpfx Akoxbck Eowoh All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Ljdpfsx D Tbmox Akweah Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH Laedpfx Ajz Eh Egekweh

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, Line marking machine: + Graco LineLazer + Euroliners Trassar 8 + Honda GX160 engine, 5.5 hp + Airless pump + Dipstick + Spray gun Receive notifications about all newly available vehicles via email – sign up for our NEWSLETTER! Errors and typos excepted; subject to prior sale! Lasdpfx Aoz Rl U Dekweh

Condition: used, You are purchasing an industrial sewing machine from Brother. Sewing machine: Brother Exedra E-100 Mark II, Foot lifter: FB II, MD-816B, DB2-B737-413 380V You can find more items in our shop! Lasdpfou Nyulox Akwsh

Condition: ready for operation (used), A marking machine for folding cartons including an inkjet printer is available. 1) Off-line feeding and transport system KBA König & Bauer udaFormaxx, min. product dimensions X/Y: 30mm/60mm, max. product dimensions X/Y: 450mm/500mm, min. product grammage: 80g/m², max. product thickness: 8mm, max. transport speed: 90m/min, max. throughput capacity: approx. 250pieces/min. Machine dimensions X/Y/Z: approx. 1300mm/700mm/400mm, weight: approx. 150kg. 2) Continuous inkjet printer KBA alphaJET mondo, print lines: 5, vertical resolution: 32P, character height range: 2mm-15mm, max. printing speed: 780m/min, nozzle diameter: 62µm, machine dimensions X/Y/Z: approx. 500mm/350mm/300mm, weight: approx. 20kg. Including base frame. Documentation available. On-site inspection is possible. Laedox Tumfepfx Akwjh

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection Ledpfo Aayk Rjx Akwoah EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 1998, Line marking machine: + ProSign Lsdjx Ek Tfspfx Akwoah + Citadine + Self-propelled – hydraulic – forward and reverse + Airless pump + Line spray gun + Hand spray gun + Honda GX160 engine, 5.5 HP + Year of manufacture: 1998 Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton Ledsd N Hgujpfx Akwoah - Different types of plastic

Condition: used, functionality: fully functional, fuel type: gasoline, Marking machine: + Greggory + Spray nozzle + Roller scraper + Compressor + Honda motor Lsdpoz Rmkasfx Akwoah Receive email notifications for all newly listed vehicles – sign up for our NEWSLETTER! Errors and typos excepted; subject to prior sale!

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, Lasdpoz St Hwefx Akwsh coolant, Low Volt light.

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: Ledpfx Aox R Aqtekweah - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Documentation, drawings, backup, software available.