Used Pony Mpt-Dl for sale (1,257)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: MPT-DL Type: Trouser press Year of manufacture: 2024 Used, with minor signs of wear, in good condition From a business liquidation Technical data according to the manufacturer For example, for jeans, sports pants, and classic trousers Prepared for connection to an external steam source With pneumatic waistband and trouser leg clamping Transverse/perpendicular waistband clamping With microprocessor and display with 10 storable programs, automatic and adjustable cycles, to be activated when the left trouser leg clamp is closed, or via foot pedal if the slider of the trouser leg clamping device is switched off or not available 1.7 HP fan Prepared for connection to compressed air Bodsz Ibflepfx Aa Ioln Photoelectric cell Connection: 400 V / 3+N / 50 Hz Dimensions (W x D x H): approx. 80 x 90 x 200 cm Weight: 150 kg Inspection or collection is possible by appointment.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. Blsdewzl Hxepfx Aa Ien ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Bsdpfexa H Ewex Aa Ieln (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Bodpsz Ibdusfx Aa Ioln Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Bledswzmcbepfx Aa Isn COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5921, overall weight: 12,000 kg, input current: 41 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, 5-axis CNC machining center 2 retractable tables, 1700x1425 mm each Linear axes X-4300, Y-2300, Z-1200 mm Rotary axes B +/- 120, C +/- 240 Tool magazines, 2 x 6 positions OSAI control system Bertronic remote control with teach-in functions 7.5 kW electrospindle, HSK-63F 2 vacuum pumps, 100 m3/hour, two clamping zones (can be combined into one large zone) Exhaust hoods for chip removal around the tables in the work area RENISHAW TS27 probe for tool length measurement and rotary axis calibration Free-standing electrical control cabinet Complete enclosure of the machine to protect against dust and noise CE marking The machine is installed and connected – it can be tested. Bsdpfxjz H Slme Aa Isln

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter Bsdpfx Aaewfhu Ho Ijln ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Bledpfxszt I Ruo Aa Ien

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ Bjdpfxowdtfus Aa Isln ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM Blodpfx Asyalc Noa Ijn consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg (Subject to changes and errors in technical data, as well as prior sale)

Condition: used, functionality: fully functional, Muller Martini Pony 246 Number of binding clamps: 5 Maximum production speed: Up to 3,000 cycles per hour Typical production speed: Approximately 1,500–2,500 books per hour Maximum book thickness: Up to approximately 40 mm Minimum book thickness: Approximately 3 mm Binding method: Hot-melt adhesive perfect binding Book Format: Maximum book size: Approximately 400 × 240 mm Minimum book size: Approximately 140 × 100 mm Bedpfjz Dh I Eex Aa Ieln Spine preparation: Milling and roughening station Features and Equipment: 5 binding clamps Automatic cover feeder Hot-melt spine gluing system Hot-melt side gluing system Milling and spine roughening unit Cover scoring/creasing station Book delivery conveyor Waste removal and dust extraction system (configuration dependent) Glue system: Hot-melt adhesive.

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. Blodpfx Asxa Hx Rja Ion It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, empty load weight: 8,420 kg, maximum load weight: 10,080 kg, overall weight: 18,500 kg, axle configuration: 1 axle, first registration: 11/2020, next inspection (TÜV): 11/2026, loading space length: 11,100 mm, loading space width: 2,500 mm, loading space height: 2,460 mm, loading space volume: 68 m³, color: white, Year of construction: 2020, Equipment: ABS, tail-lift, Unladen weight: 8420 kg, permissible total weight: 18500 kg, cargo area (L W H): 11,100 mm x 2,500 mm x 2,460 mm, cargo area volume: 68 m³, underrun protection, steel loading platform: Dhollandia 2500KG and battery, electronic braking system (EBS), toolbox, forced steering, ISO partition without fan, 1x15-pin connection plug, anti-splash guard, twin tires. You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Bodjzhp H Hepfx Aa Isln

Condition: excellent (used), functionality: fully functional, Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Bedozxqapjpfx Aa Ieln

Condition: ready for operation (used), functionality: fully functional, The Crown DL-20 steam-jacketed cooking pot is designed to ensure uniform cooking of a wide variety of food products in food processing facilities. Thanks to its steam jacket, it distributes heat evenly over the entire surface of the pot. As such, it is perfectly suited for cooking sauces, soups, prepared dishes, vegetables, meat preparations, catering products, and other recipes requiring precise temperature control. Its hemispherical bottom promotes excellent thermal circulation while limiting hot spots. Furthermore, its food-grade stainless steel pot offers high resistance to intensive use. Consequently, manufacturers achieve uniform cooking, improve the quality of finished products, and reduce the risk of sticking. Moreover, this steam-jacketed pot has a robust construction mounted on three stainless steel legs, which facilitates its integration into an industrial kitchen or a food processing production line. In addition, its steam-operated system allows for gentle, rapid cooking, making it particularly suitable for productions requiring excellent temperature control. Finally, this Crown DL-20 cooking pot is reconditioned by Europ'Équipement. Each piece of equipment is inspected, cleaned, checked, and tested before being sold, in order to offer a reliable, economical, and sustainable solution for food industry professionals. Blodpjzl D Nkefx Aa Ijn Technical specifications: Manufacturer: Crown Food Service Equipment Ltd. Model: DL-20 Capacity: 20 gallons (≈ 76 liters) Year of manufacture: 1990 Construction: Food-grade stainless steel Maximum allowable working pressure (MAWP): 35 psi (≈ 2.41 bar) Maximum operating temperature: 281 °F (≈ 138 °C)

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional Blsdpfx Aaszx Ehzo Ion SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 17,956 h, load capacity: 2,000 kg, lifting height: 11,510 mm, free lift: 3,600 mm, fuel type: electric, mast type: triplex, construction height: 4,530 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 4,822 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,280 mm, Reach truck Load center: 600 ISO class: FEM 2 B Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Solid tires Front tire size: 2 x BA Front tire condition: Not present Blsdpfoz Ifrpox Aa Isn Rear tire type: Solid tires Rear tire size: 1 x BA Rear tire condition: Not present Battery voltage: 48V Battery capacity: 775Ah Battery year of manufacture: 2016 Additional single hydraulics, integrated side shifter, battery

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 12,843 h, load capacity: 2,000 kg, lifting height: 11,510 mm, free lift: 3,600 mm, fuel type: electric, mast type: triplex, construction height: 4,530 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 4,837 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,280 mm, Reach truck Load center: 600 ISO class: FEM 2 B Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Solid tires Front tire size: 2 x BA Front tire condition: Not present Rear tire type: Solid tires Rear tire size: 1 x BA Blodpfxoz Ifrvo Aa Isn Rear tire condition: Not present Battery voltage: 48V Battery capacity: 775Ah Battery year of manufacture: 2023 Additional single hydraulic circuit, integrated side shifter, Blue Spot, battery

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,896 h, load capacity: 2,000 kg, lifting height: 11,510 mm, free lift: 3,600 mm, fuel type: electric, mast type: triplex, construction height: 4,530 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 4,842 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,280 mm, Reach truck Load center: 600 ISO class: FEM 2 B Mast type: Triplex Drive: AC Technical condition: good Front tire type: Solid tires Front tire size: 2 x BA Front tire condition: Not available Rear tire type: Solid tires Bodpfx Aez Ifr Aoa Isln Rear tire size: 1 x BA Rear tire condition: Not available Battery voltage: 48V Battery capacity: 775Ah Battery year of manufacture: 2024 Additional single hydraulic circuit, integrated side shifter, battery from 2024, Bluespot

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio Bljdpfxey Daf Io Aa Ien * Central lubrication system * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,779 h, load capacity: 1,600 kg, lifting height: 9,020 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,540 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 4,130 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,279 mm, Reach truck Load center: 600 ISO class: FEM 2 B Mast type: Triplex Drive: AC Technical condition: good Front tire type: Solid tire Front tire size: 2 x BA Front tire condition: Not available Blodpfxez H Exte Aa Ijn Rear tire type: Solid tire Rear tire size: 1 x BA Rear tire condition: Not available Battery voltage: 48V Battery capacity: 775Ah Battery year of manufacture: 2018 Single auxiliary hydraulics, integrated side shifter, overhead guard, battery, Bluespot

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Bedsyzxgfopfx Aa Isln Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: used, Year of construction: 2013, operating hours: 4,657 h, Equipment: all wheel drive, * Enclosed cab * Load sensing shut-off Bjdpfszxaxbox Aa Ieln * Rear-view camera * Air conditioning * CD radio ----Vehicle number 12423 ----Errors and prior sale excepted

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. Blodpfx Aaezd Sk He Ion An optional 16 m3 bucket is available at an additional cost.

Condition: used, Year of construction: 2008, operating hours: 8,188 h, functionality: fully functional, mileage: 57,939 km, power: 72 kW (97.89 HP), first registration: 01/2008, overall weight: 5,000 kg, fuel type: diesel, color: grey, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, Equipment: additional headlights, air conditioning, self-propelled work machine: + Boschung + Pony P4T + Registered: 24.01.2008 + 57,939 km; 8,188 operating hours + Hydrostatic transmission (fast/slow), max. speed 45 km/h + VM diesel engine, 2776 cc, 98 hp, Euro 4 + Switchable all-wheel drive + Front-wheel steering, all-wheel steering + crab steering + Front and rear hydraulics + Front lift + 3-way tipper + Auxiliary headlights + Radio/CD + Air conditioning Blodpfxszrmfbj Aa Isn + 470cm x 145cm x 220cm (l x w x h) + Permissible gross vehicle weight: 5,000 kg + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!