Used Pfeiffer Pfeiffer Tph 2200 Mit Steuerung. for sale (8,733)

Condition: refurbished (used), functionality: fully functional, -Very good condition Fedpfouq A Agex Aivspn -1. year operating time after revision -Digital analog control with RS232 interface. The recommended price is 6,000.00 EURO. The associated control unit is 800.00 EURO.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, Pfeiffer Vacuum 2x Model: TPH 2200 Fpjdpfx Aswnfpmoivon For further data see nameplate, device is untested.

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg Fpodpfx Aiey Hmfyevjn MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J Fsdpfx Aisz Icilovjpn 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DELEM DA 69T control system The machine was distributed by Knuth and manufactured in Turkey. Press force 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Overhang 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm Fodez Hmxuopfx Aivjpn Travel of X-axis 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power Main drive 15 kW Hydraulic tank volume 250 l Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some punches and dies are included in the scope of delivery (see pictures). Inspection with the machine running is possible.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fsdpfxez Ipdve Aivepn Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Datacon 2200 EVO (Gen3) The die bonder / multi-chip assembly machine from Datacon (Besi). Fodpfx Aioy S S Uwsvspn Die attach, multi-chip, and flip-chip capabilities. Placement accuracy: ±10 µm at 3σ Theta: ±0.15° at 3σ Bond force: 0.5–75 N Up to 4 working heads Wafer handling up to 12 inches Die attach up to approximately 7,000 UPH/module Flip-chip up to 2,500 UPH with dipping Heated bond head up to 450 °C Substrate area up to 325 × 200 mm Weight approximately 1,300 kg

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Fedpfxezt Ai Eo Aivjpn Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: defective spare-parts repository (used), Year of construction: 1994, functionality: not functional, We are selling an industrial robot, type IRB 1500, with an S3 controller from ABB Robotics, manufactured in 07/1994. The unit is defective/not operational and displays the following error messages (see photos): - 506 Servo error 2 - 536 Motor overload error The robot can be moved slightly intermittently until the error messages reappear. We are selling the robot as a complete package, including the control cabinet, operator panel, and metal frame. Individual parts are not for sale. Please note that we offer neither a guarantee nor a warranty. Returns after purchase are not possible. After the purchase, the robot can be collected by appointment during our business hours. If required, we will gladly assist with loading. Selling price: €3,250 (negotiable) plus VAT. Fpjdpfxszh Uvgj Aivon

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Fpedpfxoz Ehfae Aiven Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. Fpjdpfsyq Rdysx Aivsn The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Fpedpfx Aowcgr Ejiven Sale to businesses only. No guarantee. No warranty.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Fpsdpfsz Ipunox Aiven FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Robot weight: approx. 51.4 kg Fsdpfx Aioziaayevopn CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.

Condition: excellent (used), Here we offer a Fanuc robot with a control unit. Fanuc Robot M-420I A Fjdpfx Aijzdit Tsvopn The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance at high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Large working envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload within the entire working envelope. Linear motion speeds up to 4200 mm/s. Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2026, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Fsdpjy T N T Hjfx Aivopn Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new Fpedpfx Aiegqfmnevsn

Condition: ready for operation (used), Stäubli TX90 industrial robot arm SN:F04/50Y0A1/A/01 with CS8 C complete control and operating panel,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fpjdpfx Aijz Ac Hcevsn

Condition: excellent (used), Kuka Robot Here, we offer a Kuka robot for sale. (As new/unused) Kuka robot KR 60L30-3 Arm length: 1220 mm Number of axes: 6 Weight: 665 kg Axis 1 (A1) ± 150˚: 128˚/s Axis 2 (A2) +75˚/-105˚: 102˚/s Axis 3 (A3) +158˚/-120˚: 128˚/s Axis 4 (A4) ±350˚: 260˚/s Axis 5 (A5) ±119˚: 245˚/s Axis 6 (A6) ±350˚: 322˚/s With sealed software Rated payload: 30 kg Controller: KRC4 Type: KR 60 L30-3 Scope of delivery: (See pictures) We are happy to answer any further questions you may have by phone. Written orders can be placed via email or fax. Fedpfx Aiozd Uc Esvspn

Condition: used, Used YASKAWA industrial robot HP 20. In good condition. With NX100 controller. Fsdpfxoxhg S Tj Aivopn

Condition: not inspected (used), functionality: unexamined, Pfeiffer Type: TPH 1500 No: PM P01 270 BL232 Fodpfx Aewnpnyoivjpn For further data, see nameplate illustration; device is untested.

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 Fpsdpfxencd S Uo Aivon YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: excellent (used), functionality: fully functional, mileage: 420,000 km, gearing type: semi-automatic, fuel type: diesel, MAN TGS with Fassi 1300 T/M crane New TÜV and UVV inspection certificates Tires in good condition Vehicle has been partially repainted and is rust-free Semi-automatic transmission Fpsdpfxsz Ii Uhe Aivjn 480,000 km

Condition: used, Used YASKAWA industrial robot MH 50. Year of manufacture: 2010. With DX100 control unit. Fodpfxjxhg S He Aivspn

Condition: new, Here we offer an IAI Ultra Compact SCARA robot with a control unit. IAI Ultra Compact SCARA Robot IX-NNN3515-5L-T2 Controller XSEL-QX4-NNN3515-P1-EEE-2-2 Arm length: 350mm Payload: 1 kg maximum, 3 kg Weight: 18.2 kg Motor power: AXY axis 1: 200W, axis 2: 100W, axis 3: 100W, axis 4: 50W Fjdpfx Aezdindeivspn The robot was stored! New, meaning unused! Type: IX-NNN3515-5L-T2 / XSEL-QX4-NNN3515-P1-EEE-2-2 Condition: new Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.