Used Osv S400G for sale (58)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0385, The “OSV S400G” mixing and casting machine for PUR foam gaskets. Kdjdpfxoyzhbre Akpeu Designed for manufacturing of injection molding products from two-component polyurethane systems with their application along a given trajectory, for example electrical cabinets doors.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V Kjdpfxeyug Hxe Akpjdu • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module Kdodpfx Aoyug R Rskpsu

Condition: used, functionality: fully functional, Offered here is a pulverizer / demolition shear Brand: OKADA OSV-83V LENOX MS21 Suitable for 20-25t excavators Used, in functional condition. For any questions, please contact us by phone or E-mail Kjdpexw N Szofx Akpjdu Shipping within Germany is possible. Please inquire about shipping costs in advance. All information is provided without guarantee or warranty. Subject to errors and prior sale. We speak French / Мы говорим по русски We speak English / Noi vorbim română Viber / WhatsApp / Skype For an additional fee, we handle all customs clearance and registration formalities. We can also transfer vehicles to the port for an additional charge. We sell exclusively according to our general terms and conditions. We do not accept any liability for errors in the vehicle description. Opening hours: Monday to Saturday 08:00 - 12:00 13:00 - 18:00 Saturday by appointment only EXPORT/NET PRICE PICK UP FROM LOCATION – DATE BY ARRANGEMENT We care for all necessary customs clearance and vehicle registrations for an additional charge. We transfer the vehicles to the port for an additional fee. We sell exclusively according to our general terms and conditions. We do not assume any liability for errors in the vehicle description. The vehicle can be laminated or labeled with advertising.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, TOS Varnsdorf WHQ 13.8 CNC table type horizontal boring mill, year of construction 2000, made in the Czech Republic. The machine is controlled by an original Heidenhain TNC 430 CNC with the Heidenhain operating panel and runs programs produced with CAM software. The control cabinet air conditioning unit was replaced one year ago. The machine is well maintained and in full working order. Technical data: - Control: Heidenhain TNC 430 - Spindle diameter: 130 mm - Spindle speed: 10 - 2,500 rpm - Tool taper: ISO SK 50 - X travel: 3,500 mm - Y travel (vertical axis): 2,500 mm - Z travel: 1,250 mm - Table size: 2,200 x 1,800 mm - Operator platform with 250 kg load capacity Kdjdpfjz Ap Awsx Akpsu - Air conditioning unit fitted one year ago - Programmable via CAM software The machine can be inspected under power in our workshop.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 1,500 rpm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 600 mm, TOS Varnsdorf WHN 13 A table type horizontal boring mill (borer), year of construction 1982. The machine has been retrofitted with a FANUC CNC control; maximum spindle speed 1,500 rpm. Well maintained and in working condition. Technical data: Kodpfx Aoz An Ufokpodu - Table size: 1,600 x 1,800 mm - X travel: 3,500 mm - Y travel: 2,000 mm - Z travel: 1,000 mm - W travel (boring spindle / quill): 600 mm - Spindle diameter: 130 mm - Max. spindle speed: 1,500 rpm - Control: FANUC (retrofit) Available for inspection in our workshop and ready for immediate delivery.

Condition: used, mileage: 62,323 km, power: 75 kW (101.97 HP), first registration: 01/2022, fuel type: diesel, next inspection (TÜV): 05/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking heater, soot filter, traction control, * Please schedule an appointment for a consultation or test drive by phone before your visit. This will help you avoid waiting times, and we can ensure that we have enough time for you. * Non-smoking vehicle * This vehicle has a well-maintained service history. * Last service performed at 56,742 km. * TRANSMISSION / CHASSIS * Engine 1.5 L - 75 kW CDTI DPF * Drive type: Front-wheel drive * Transmission: 6-speed LIGHTS & VISIBILITY * Driver assistance system: High beam assistant * Windshield wipers with rain sensor * Headlights: Halogen * Fog lights * Visibility package ENTERTAINMENT * Audio-navigation system: Multimedia Navi Pro * Infotainment display, large * DAB tuner (digital radio reception) * Audio controls on the steering wheel ASSISTANCE SYSTEMS AND SAFETY * Parking pilot system, front and rear * Start/Stop system * Driver assistance system: Lane keeping assist * Driver assistance system: Traffic sign recognition * Speed control system (cruise control) Kjdpfszitpnsx Akpjdu * Driver assistance system: Hill start assist (HSA) * Airbag, driver/passenger side COMFORT * Auxiliary heater with remote control * Central locking with remote control * Heated steering wheel * Lumbar support, front left seat * Air conditioning OTHER * Body/structure: Van * Diesel particulate filter * Partition between passenger and cargo area with window * Rear wing doors with glazing * Warning system for safety belt, passenger side * Luggage compartment lighting (LED) * Spare wheel in driving condition * Safety package * Airbag, driver side * Seat adjustment, front left (6-way) * Seat adjustment, front right (4-way) * Vehicle keys (2), both folding * Sliding door, right * Exterior door handles, vehicle color * Driver assistance system: Autonomous emergency braking system with front collision warning and pedestrian recognition * Driver assistance system: Driver drowsiness detection sensor * Wheel covers * Low emissions according to emission standard Euro 6d * INTERIOR TRIM MISTRAL/LAMA * Passenger headrest, front and rear * Version for Germany * 2 ignition keys, one folding * Transmission component * Remote control key OSV * Remote control key Europe * Rear bumper, black * Delivery inspection * Vehicle type: Commercial N1 * Side protection strip, anthracite * Comfort seats, driver/passenger * Power windows, driver side * Power windows, passenger side * Seatbelt pretensioner, driver & passenger * Parking brake, manual * Wheel hub cover * and much more * The above information is subject to change without notice. It does not constitute an agreed-upon condition. Errors and prior sale excepted. * Our services: * Financing is possible, even without a down payment * Registration service * Trade-in of your old car: * Delivery possible * Tire service, winter and summer tires available for an additional charge * We also speak several languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: used, functionality: fully functional, KOVOSVIT VO 63 Radial Drilling Machine – Drilling Capacity 80/100 mm For sale: used KOVOSVIT VO 63 radial drilling machine, manufactured in the former Czechoslovakia. Heavy-duty industrial radial drill designed for drilling, boring, countersinking and tapping operations on large and heavy metal workpieces. The machine features a height-adjustable and swivelling radial arm, a horizontally movable drilling head and a heavy-duty base plate with T-slots. Technical specifications: - Manufacturer: KOVOSVIT Holoubkov - Model: VO 63 - Max. drilling capacity in steel / cast iron (solid drilling): 80 / 100 mm - Max. tapping capacity in steel / cast iron: M85 - Max. spindle nose diameter: 100 mm - Spindle travel: 380 mm - Spindle taper: Morse MT6 - Number of spindle speeds: 16 - Spindle speed range: 11.2–2,000 rpm - Number of spindle feeds: 16 - Spindle feed range: 0.035–2.8 mm/rev - Spindle reach min./max.: 386–2,000 mm - Distance from spindle to base working surface min./max.: 473–1,803 mm - Base working surface: 1,100 × 2,300 mm - Number of T-slots: 3 - T-slot width: 22 mm - Distance between T-slots: 250 mm - Main motor power: 7.5 kW Kdodpfxez Rpads Akpou - Power supply: 3 × 380 V / 50 Hz - Connected power: 10 kVA Dimensions and weight: - Length: 3,700 mm - Width: 1,380 mm - Height: 4,050 mm - Machine weight: 7,100 kg Equipment and features: - Height-adjustable and swivelling radial arm - Horizontally adjustable drilling head - Mechanical spindle speed and feed selection - Mechanical spindle feed - Heavy-duty base plate with T-slots - Conventional control Machine condition: Used machine in the visual condition shown in the attached photographs. Normal signs of age and previous use, including paint wear and areas of superficial corrosion. Further information available upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, For sale: a new KSB Delta Primo SVP 3/0402 M pressure boosting system, equipped with three KSB Movitec V 4/2 B vertical pumps, each with an individual PumpDrive variable frequency drive. The system is designed for boosting and maintaining pressure in water systems. System data from the nameplate: Manufacturer: KSB Model: Delta Primo SVP 3/0402 M ID: 05082258 Date of manufacture: 17th week of 2022 Power supply: 3 × 400 V, 50 Hz Maximum current: 5.2 A Nominal system pressure: PN10 Protection rating: IP54 Control based on a pressure transducer Manufactured in: Netherlands Parameters of a single pump: Model: KSB Movitec V 4/2 B Flow rate at the point indicated on the nameplate: 4.01 m³/h Head at this point: 14 m Power rating on the nameplate: 0.55 kW (0.26 kW), 50 Hz Rotational speed: 2900 rpm Connections: DN32, PN16 Kdjdpfx Akjz Srfropju Temperature range specified for the pump: from -20 to +100°C KSB SuPremE motor, efficiency class IE5 Equipment: 3 KSB Movitec pumps 3 KSB PumpDrive variable frequency drives Control cabinet with operating panel and main switch Stainless steel manifolds Isolation valves Pressure gauge and pressure transducer Diaphragm tank Common mounting frame Operating and installation manual Condition: new. The system shown in the photos is for sale.

Condition: used, Spectro Type: Ciros Vision CCD Analysis device Ciros Vision CCD Overall height: 162cm, overall width: 150cm, overall depth: 90cm Kdjdpsziapuofx Akpju Adjustable extraction Total air flow: 500m³/h Condition: used Scope of delivery: (Autosampler as shown in the picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, mileage: 466,700 km, first registration: 05/2003, axle configuration: > 3 axles, V8 BSF 52.16H 7,414h Kdedpfxeyuym Ss Akpou

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Kjdpszydarsfx Akpjdu Year of manufacture: 2015 Heidenhain iTNC 530 control system X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Tool changer: 24-position SK50 Spindle speed: up to 8000 rpm Spindle torque: 406 Nm / 100% 623 Nm / 40% Chip conveyor Coolant pressure: 20 bar Weight: 11800 kg

Condition: used, Year of construction: 2010, Faceplate LD 650 for TOS WHQ 13 Kodpjz I Dvmefx Akpsdu For sale: a used faceplate LD 650, manufactured in 2010, suitable for TOS WHQ 13. Suitable for facing, turning, and machining large diameters. Slide stroke: 170 mm, maximum machining diameter: approx. 1,000 mm. The faceplate is intended for use on a TOS WHQ 13. Technical data: Type: LD 650 Diameter: 650 mm Slide stroke: 170 mm Machining diameter: 300 - 1,000 mm Speed: up to 150 rpm including turning tool holder Price: 9,100.00 Euro net (new price: 21,500.00 €)

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,100 mm, spindle diameter: 100 mm, table length: 1,100 mm, table width: 1,000 mm, TOS Varnsdorf WH 10 NC table type horizontal boring mill (borer), year of construction 1987. The machine has been converted to an HSP control and its electrical/electronic system has been overhauled. Well maintained and in working condition. Technical data: - Table size: 1,100 x 1,000 mm Kodpfjz Apa Nex Akpsdu - X travel: 1,200 mm - Y travel: 1,100 mm - Spindle diameter: 100 mm - Control: HSP (retrofit), electrics overhauled Available for inspection in our workshop and ready for immediate delivery.

Year of construction: 2020, condition: like new (used), Sympatec laser diffraction system. HELOS/BR multi range, laser diffraction sensor for particle analysis with automatic set-up of selectable measuring range of up to 5 range modules between 0.1 micron – 875 micron. RODOS, dry dispersing system, injector diameter 4 mm, bulk hardened steel; with funnel adapter, including flow – optimized extraction, recommended particle size range: product dependent up to 1500 micron. VIBRI, intelligent vibratory feeder, for the RODOS or GRADIS system family, complete, comprising chute, input funnel 150 cm3 and connecting cable for RS485. SUBMICRON module, R2, for HELOS/R multi range series, measuring range: 0.25/0.45 – 87.5 micron. TOPMICRON module, R4, For HELOS/BR multi range series, measuring range: 0.50/1.8 – 350 micron. Nilfisk ATTIX 33-2H PC, 230V AC, dust class H Computer system Fujitsu ESPRIMO E957 E90+, i7-7700 3,60GHz, SSD. Fujitsu TFT display 27” PAQXOS software, for the operation of all Sympatec instruments with TCP/IP communication, for computers with Windows 7 or 10, on data storage media, including documentation and software protection key. Kedpfx Aeh Nyfcekpjdu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, Travel ranges: - X-axis: 14,000 mm - Y-axis: 4,000 mm - Z-axis: 1,000 mm - W-axis travel: 800 mm Equipped with automatic tool changer Model WRD 150 Q - 60 tools Manipulator for horizontal and vertical tool changes Milling head - HUI 50 - automatically positionable, with pick-up station + 1 storage location Band filter system with 2 cooling circuits - internal cooling through the spindle with approximately 20 bar (30 l/min), external cooling with 3 bar (40 l/min) - RAPID 3.1, manufacturer AME Kedpjzzwhljfx Akpjdu EQUIPMENT: - Chip conveyor for X = 14,000 mm - 3D probe with wireless transmission, manufacturer M & H, wireless handwheel PETEC - 6 clamping plates AND 4, 4020 x 1885 mm

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 03/2004 7.5 kW 240 m³/h -600 mbar Connection 400V Dry-running displacement machines The compact units consist of a rotary lobe blower stage with vertical conveying direction, motor, belt drive, flanges, filters, silencers, suction or pressure connections, pressure/vacuum relief valve, and check valve (for pressure operation). Apparently unused Kdodpey H Dxqefx Akpeu

Condition: like new (used), Year of construction: 1999, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,120 mm, total length: 3,100 mm, total height: 3,396 mm, table width: 396 mm, table length: 1,820 mm, overall weight: 4,300 kg, year of last overhaul: 2026, Equipment: CE marking, cooling unit, documentation/manual, “CE” version, after undergoing a comprehensive overhaul including a new paint job in 2026, with functioning cooling system, complete with all documentation, fully operational. Option for testing available in the town of Dobříš, Czech Republic. Kodpfezy Samjx Akpedu

Condition: reconditioned (used), Year of construction: 2015, Refurbished BUSCH SECO SV 1040 C 000 INXX 1.25 kW motor P max = 120 hPa (mbar) V max = 40 m3/h Kdedpfxew Sm A Io Akpsu Weight approx. 40 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Kjdpfx Akjzv N Iaepedu Qualitative Machine Benefits • Perfect condition • Full documentation available including service history Technical Machine Benefits • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Dimensions Machine Depth 4200 mm Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 Kdodpfx Aszwv Dkjkpju * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 Kdedpfxjhqmghe Akpeu ISO class F, B3, KKL

Condition: used, mileage: 372,408 km, power: 294 kW (399.73 HP), first registration: 06/2019, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 5,500 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,260 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Drivetrain Type of fuel: CNG Drive: Wheel Axle configuration Tyre size: 315/70R22,5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension Weights Kjdpfx Ajxx Tarjkpedu Empty weight: 11.580 kg Carrying capacity: 14.420 kg GVW: 26.000 kg Functional Tail lift: D HOLLANDIA, slider lift = Additional options and accessories = - PTO - Refrigerator - Roof spoiler

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Kdodpfx Aoz Ii Tdekpju Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: new, Available quantity: 6 pieces Unused Alfa Laval LKC-2 check valve for hygienic process systems. Stored in original packaging. Ksdpfszw I Riox Akpsdu Manufacturer: Alfa Laval Type: LKC-2 Article number: 9612220005 Design: LKC-2-ISO-W-76-EPDM-304 Valve type: Check valve Connection standard: ISO Connection size: 76 mm Connection type: Welding end Seal material: EPDM Material: Stainless steel 304 Max. product temperature: 140 °C Min. product temperature: -10 °C Internal surface: Ra < 0.8 µm Condition: NOS / unused, stored in original packaging.