Used Olma Combi Line for sale (11,265)

Year of construction: 1988, condition: used, Olma Combi Door Panel Line (1988), Panel Dimension Length Min/Max 330/1320 x 538mm Width, Cycle Time 17 Seconds, Dimension of Sheet Min/Max Length 390/1400mm x 600 Width x 0.5mm Thickness Dcjdez I Szqopfx Adhon Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Dedpjzzxyiefx Adhjcn Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: used, Year of construction: 2007, Koenig Combi line KCL/14 modular bun roll line for the production of high quality products: round, oval, rounded and stamped, long rolled and stamped, flattened, long rolled and cut. seeded. working width 800mm Konig Rex Futura II headmachine 4, 5 or 6 rows SK58 weight range 35-85 gram higher weight range is possible with new rounding drum ledges capacity 4, 5, 6 row maximum 6000, 7500 or 9000 pcs/h Siemens Simatic controlling with touch panel pre-prover VG190 long roll unit RR800 seeding unit setting unit AS800/1000 Dsdpfsryckbox Adhscn year of build 2007 pictures BEFORE reconditioning

Condition: used, Year of construction: 2008, Konig Combi Line KCL 7 modular bun roll line for the production of high quality products Dodpfx Adoub Rnqohscn performance and products: flattened products (e.g. dough for Streuselschnecke) approx. 80g up to 6,000 pieces/hour; product diameter approx. 100-110mm - main product! round unstamped products: up to 7,500 pieces/hour round stamped products max. 75g (e.g. Kaiser): up to 7,500 pieces/hour long-rolled pressed products max. 75g (e.g. Styrian long roll, Housky): up to 6,000 pieces/hour long-rolled sliced products max. 75g (e.g. sliced rolls): up to 6,000 pieces/hour long-rolled products max. 85g up to 6,000 pieces/hour depending on the product length; max. product length 150mm flat-pressed products max 85g up to 6000 pieces/hour depending on product diameter; max. product diameter 120mm Konig Rex Classic I headmachine 3, 4 or 5 rows SK 58 weight range 35-85 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h König Combi LineR 600-VG 190/230-ST/K-K5-VO-SL4-Hou4-SCHN4-RR 560-4R -AS600 consisting of: pre-long rolling station R600 SPS Siemens Blue Line digital control panel pre-prover VG190/230 stamping device with 3 stamps: Kaiser Schnitt(cut) stamped forming station RR-560-4R driven lower belt pre-pressure roller adjustable 4 driven rollers 4R via lower belt - speed continuously adjustable - for flattening; flour duster thru R4 useable long moulding board for long rolling setting unit AS600/K+L setting device mechanically prepared for later installation of a Streuselstation - in line or to the left or right - front protective cover on the setting device for removal year of build 2008 pictures BEFORE cleaning

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. Dcodpey Uk A Ssfx Adhen DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: used, Year of construction: 2010, Koenig Combi line KCL/7 modular bun roll line for the production of high quality products: round, oval, rounded and stamped, long rolled and stamped, flattened Konig Rex Basic headmachine 3, 4 or 5 rows SK 67 weight range 55-120 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h König Combi Line CL600+WDK+RR+AB consisting of: pre-long rolling station R600 Siemens digital control panel pre-prover VG190/230 stamping device with 2 stamps: Kaiser stamped Dcsdpfx Adexr Ichshsn forming station R600 setting unit AS600 year of build 2010 pictures BEFORE reconditioning

Condition: used, Year of construction: 2005, Koenig Combi line KCL/13 modular bun roll line for the production of high quality products: round, oval, , long rolled , flattened working width 800mm Konig Rex Futura II headmachine 3, 4 or 5 rows SK58 + SK70 weight range 35-135 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h Siemens Simatic controlling with touch panel Dcsdozh Ncbjpfx Adhen pre-rolling unit pre-prover VG190 long roll unit RR800 setting unit AS800/1200 year of build 2005 pictures BEFORE reconditioning

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 Dcjdexd Thmjpfx Adhen 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: used, maximum load weight: 53,396 kg, overall weight: 62,000 kg, axle configuration: > 3 axles, first registration: 07/2020, next inspection (TÜV): 05/2027, total length: 12,600 mm, total width: 2,470 mm, total height: 1,360 mm, Year of construction: 2020, Additional information: * Type | First axle: Bridgestone R * Tire size | First axle: 385/55 R22.5 * Tire tread depth, inner left | First axle: 70% * Tire tread depth, inner right | First axle: 70% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Type | Fourth axle: Bridgestone R * Type | Fifth axle: Bridgestone R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire size | Fourth axle: 385/65 R22.5 * Tire size | Fifth axle: 385/65 R22.5 * Tire tread depth, inner left | Second axle: 70% * Tire tread depth, inner left | Third axle: 70% * Tire tread depth, inner left | Fourth axle: 70% * Tire tread depth, inner left | Fifth axle: 70% * Tire tread depth, inner right | Second axle: 70% * Tire tread depth, inner right | Third axle: 70% * Tire tread depth, inner right | Fourth axle: 70% * Tire tread depth, inner right | Fifth axle: 70% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Maximum axle load | Fourth axle: 9000 kg * Maximum axle load | Fifth axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Aluminum rims | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Position | Fourth axle: Rear * Position | Fifth axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brand | Fourth axle: Other * Brand | Fifth axle: Other * Brake type | Second axle: Disc brakes Dodpfxjz Ivgwo Adhecn * Brake type | Third axle: Disc brakes * Brake type | Fourth axle: Disc brakes * Brake type | Fifth axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Suspension | Fourth axle: Air suspension * Suspension | Fifth axle: Air suspension * Lift axle | Second axle: Yes * Lift axle | Third axle: Yes * Lift axle | Fifth axle: Yes * Aluminum rims | Second axle: Yes * Aluminum rims | Third axle: Yes * Aluminum rims | Fourth axle: Yes * Aluminum rims | Fifth axle: Yes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Dsdszylxispfx Adhecn Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line Dcjdpfjzgayusx Adhen This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Dsdpfx Adoxy S H Tshscn Air consumption / m³/h

Condition: good (used), Year of construction: 2014, Koenig Combiline bun production line Dcsdozz Ryzepfx Adhjn - used - year of manufacture 2014 - Rex Futura Classic divider - weight range 20-135 g - computer control - maximum output 7,500 units/hour - rounding station, pre-proofing station, stamping station, bun discharge onto trays or baking pans - machine from production - inspected and cleaned - collection from warehouse/shipping option available - price upon request

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, König Combiline KCL 6 / 800 mm with WK-RR and Donut station – 2022 Automatic König Combiline line for the production of small breads and shaped products, equipped with a Classic Rex Futura, a WK-RR shaping station, and an original König Donut station. Features: – Manufacturer: König – Model: Combiline KCL 6 – Year: 2022 – Working width: 800 mm – Dividing and rounding head: Classic Rex Futura – Type: Futura T5/4/3S – Drums: SK51 + SK65 – Weight range: 22 to 115 g – Operation in 3 / 4 / 5 rows – Maximum capacity: up to 7,500 pieces/hour – Control via touchscreen with programmable settings Line composition: – König Classic Rex Futura, divider-rounder – Pre-elongator – Proving chamber / pre-fermentation – Shaping station with WK-RR coiler – Moistening and seeding system – Automatic depositing system – Donut cutting / stamping station Dcjdpfx Asz I U Tcsdhjn The WK-RR station allows, in particular, the processing of elongated and coiled products and significantly increases the versatility of the line. The Combiline enables the production of a wide range of products: – Round small breads – Hamburger buns – Hot dog buns – Elongated small breads – Flattened products – Coiled products – Various shaped products – Donuts König Donut station: – Width: 800 mm – Bottom-side center cutting – Centering device for precise cutting – Automatic removal of cut dough – Stainless steel construction Condition: Line in very good condition and always well-maintained. It is currently still installed in a bakery in the UK and can be viewed before dismantling. Dismantling is scheduled soon, and the line will then be available in our warehouse in Belgium. Video available upon request.

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Djdpfx Aezp H Epjdhjcn Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: good (used), Manufacturer: Ringoplast ✓ Model: Backgut Combi / tilting trays, 2,500 pieces Dcodpfx Aeyy Ix Iedhsn

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Dcedpfxozw Apgs Adhen Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Dcodexyi Rvopfx Adhjn Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Dodpfxozvaibe Adhecn Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Dcodpfszuypxjx Adhon Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Roll production line König Classic Rex Combiline 800 This system is currently being refurbished (the photos are from the bakery). Suitable for the production of round, oval, and stamped rolls, as well as other dimpled rolls. Year of construction: 2008 Dough divider and rounder, type: Classic Rex T6 Proving cabinet, type: Combiline 800 Weight range: 45–100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proving cabinet Proving cabinet with climate control (temperature, humidity) Side discharge conveyor for subsequent production (e.g., downstream wrapping machine) Dcedsz A Slfjpfx Adhsn Stamping station including 2 stamping dies (Kaiser and salted rolls) Deposition machine for baking trays up to a maximum length of 100 cm.

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Dsdpfevw Egrsx Adhocn Can be seen running In excellent condition

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit Dcodpfx Aszuyqvjdhjn - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Dodpfxsxrcyhe Adhecn

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Djdpez En Axsfx Adhecn Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694