Used New Europa Vs390 for sale (18,699)

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Machine Specification EUROPA eturn VS390 Swing over bed 390mm Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ Dcodpfx Aenzhtwemnei DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Dsdpfx Amonxi H Ujneci Rear splash guard

Condition: used, Year of construction: 1989, color: red, Applicable material: Hay Dcjdpfxsziplrj Amnsi Bale width: 1200 Bale height: 900

Condition: used, power: 357 kW (485.38 HP), color: other, Year of construction: 2016, Empty weight: 5.500 kg Dimensions (LxBxH): 590 x 195 x 255 cm Track width: 4 cm Number of keys: 1 Serial number: HHKMC13HG000001 Chassis number: HHKMC13HG000001 Key: yes Engine: Yanmar Engine power (kW): 48.5 kW Hour meter reading: 3929 hours Track width: 400 mm Bucket: yes Bucket dimensions: 1400x600x550 mm Dozer blade width: 1900 mm Air-suspension seat: Equipped with: excavator bucket Overall dimensions: 5900x1950x2550 Operating weight: 5500 Kg Djdezhiy Tepfx Amneci Condition: signs of use Online auction of construction, agricultural and industrial machinery (including. JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Wednesday 24 June and closes Tuesday 7 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 7 July Pickup day is on: - Tuesday 14 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Dcedey S Rqwjpfx Amnji Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Dcodpfsyuuc Isx Amnoi Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Dodpfx Ameyuubdeneci Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, fuel type: diesel, first registration: 07/2005, Year of construction: 2005, operating hours: 8,439 h, Mini excavator Kobelco New Holland E70 – total weight 8,000 kg – engine power 40.5 kW – quick coupler system – CW10 – swing boom – grading blade – = More information = Drive: Crawler tracks Operating weight: 7,950 kg Reference number: 7 Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Djdpfx Aox Scnbsmnsci

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Dsdpfsua U Hzsx Amneci Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Inside : polished weld Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Possible to choose color of outside plates if you need insulation.

Condition: used, Year of construction: 2007, operating hours: 11,659 h, Internal vehicle number: MK300034 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. Dodjyzk Iuepfx Amnoci We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Qty 2 available Dcsdpfx Amsyvutwonoi

Condition: new, Year of construction: 2023, New - Never Installed Envistal Flex Air handling units with high flexibility Side-connected air handling unit with integrated controls and a wide range of functional sections. Djdoyvunuepfx Amnsci Model - TH-600-AA-2V-1-40-00 Year 2023Max allowable pressure 40.5 bar

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG WEIGHT: 14,100 KG OPTIONS: Dodoyzliyjpfx Amneci 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD GOOD CONDITION Price is Ex VAT.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA Dodpfoyug R Rjx Amnjci • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-Series, approx. year of manufacture 2012) 110 hp Very good condition Approx. 7000,- Dsdpfjxnvlvjx Amnoci

Condition: like new (used), functionality: fully functional, fuel type: diesel, color: blue, overall weight: 4,800 kg, total length: 4,504 mm, total width: 1,778 mm, Equipment: air conditioning, cabin, NEW HOLLAND LT T4 100 ORCHARD TRACTOR - HOURS 1589 - SUPERSTEER - 4-WHEEL DRIVE - HALF-POWER SHIFT - REVERSER - 4-WHEEL DRIVE - CABIN WITH FILTERS - AIR CONDITIONING - YEAR 2018 - 100 HP - 73 kW - 3387 CC - LENGTH 4.504 m - WIDTH 1.778 m - FOR INFORMATION, CONTACT DAVIDE: 3355266031. Dcodpezhltisfx Amnsi

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Dcodpfxjzhkhxo Amnoi Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: used, Year of construction: 2009, operating hours: 12,395 h, Equipment: all wheel drive, Internal vehicle number: G400017 Available immediately on our premises in Kaufungen. For more information, please contact: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Operating hours: 12,395 Air conditioning Quick coupler Lehnhoff MS08 Dsdpoyvm Awefx Amnsci Weight: 8,590 kg Blade Engine: Isuzu Deep excavation bucket, 400 mm cutting edge Deep excavation bucket, 900 mm cutting edge Grapple, 600 mm Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), functionality: fully functional, power: 216 kW (293.68 HP), fuel type: diesel, overall weight: 24,000 kg, Year of construction: 2008, operating hours: 9,800 h, Equipment: all wheel drive, cabin, New Holland W270B wheel loader, year of manufacture 2008, approximately 9,800 operating hours, in good condition, immediately ready for use, permissible total weight 24,000 kg, transport and delivery possible, located near Lübeck, viewing possible at any time. Dcedpfszbuqlox Amnsi

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,085 kg, maximum load weight: 565 kg, overall weight: 1,650 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,760 mm, Equipment: all wheel drive, Power steering, diesel manual transmission, year of manufacture 2024, 18.2 kW, 1,319 cm³, all-wheel drive, 1 seat, side-mounted gear lever, shuttle transmission, 6 forward and 2 reverse gears, rollover bar with beacon, analog fuel gauge, rear work lights swiveling, 2 front weights at 15 kg each, 3-cylinder, power steering, total length 2,760 mm, agricultural tires, front diagonal tires: 6.0-12, rear 8.30-20, weight 1,085 kg, permissible total weight 1,650 kg. The vehicle had a one-day registration in 04/2024. FOR US, CONDITION AND FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. For further questions, please contact Mr. Faller at the provided number. //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information provided without guarantee.* Dcsdpjwtnzpofx Amnoi You will find more offers on our homepage. The description and specified data do not constitute a guarantee and are non-binding. The only binding agreement is the purchase contract concluded at the dealership upon purchase of the vehicle. Errors and prior sale excepted!

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,210 kg, maximum load weight: 790 kg, overall weight: 2,000 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,895 mm, Equipment: all wheel drive, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, 1 seat, easy-shift transmission, 9 forward gears + 9 reverse gears, shuttle gearbox, side-mounted gearshift, analog fuel gauge, rear swivel work lights, roll bar, 2 front weights at 15 kg each, 3 cylinders, power steering, total length 2,895 mm, weight 1,210 kg, bias-ply tires front: 6.0-12, rear: 8.30-20, permitted total weight 2,000 kg. FOR US, CONDITION AND GUT FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the given number. //* TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information is provided without guarantee. For more offers, visit our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the sales contract concluded at the dealership upon purchase of the vehicle. Subject to errors and prior sale! Dcsdjwtpvuopfx Amnoi

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,300 kg, maximum load weight: 510 kg, overall weight: 1,810 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,895 mm, Equipment: all wheel drive, differential lock, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, hydrostatic transmission, 3-cylinder, 20 km/h, differential lock, power steering, 1 seat, analog fuel gauge, rear swiveling work lights, 2 front weights at 15 kg each, roll bar with beacon, cross-ply tires front: 6.0-12, rear 8.30-20, overall length 2,895 mm, weight 1,300 kg, permissible total weight 1,810 kg. Turf tires available for an extra charge of €500.00 net. FOR US, CONDITION AND FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller by phone. EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE. All details provided without guarantee. For more offers, visit our homepage. The description and data provided do not constitute a warranty and are not binding. The only binding agreement is the purchase contract signed at our dealership. Subject to errors and prior sale! Dodpfxewtpvzj Amnoci

Condition: new, mileage: 5 km, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,525 kg, maximum load weight: 600 kg, overall weight: 2,125 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 5 h, Equipment: all wheel drive, cabin, differential lock, Power steering, switchable all-wheel drive, diesel engine 18.2 kW, 1,319 cm³, 4.6 operating hours, cab, illuminated dashboard, adjustable suspended seat with safety belt, 1 seat, hydrostatic drive, analog fuel gauge, rear swiveling work lights, 2 front weights of 15 kg each, rotating beacon, 3 cylinders, power steering, differential lock, 20 km/h, front hydraulics, braked towing capacity 3,000 kg, lifting capacity 600 kg, diagonal tires front: 6.0-12, rear: 8.30-20, weight 1,525 kg, permissible total weight 2,125 kg. Turf tires available for an additional €500 net. FOR US, CONDITION AND FEELING MATTER MOST; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //*TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information without guarantee.* More offers can be found on our homepage. The description and the data provided do not constitute a binding assurance and are not guaranteed. The only binding agreement is the purchase contract concluded at the dealership when the vehicle is bought. Errors and prior sale excepted! Dcsdpfx Amjwtqmzsnei

Condition: used, Year of construction: 2009, operating hours: 11,707 h, Equipment: all wheel drive, Internal vehicle number: G300381 Available immediately at our yard in Kaufungen. More information at: Dcedpfx Asxnulbomnei * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Year of manufacture: 9 10,700 hours 12 tons 6x6 all-wheel drive Financing example: * Internal number: G300381 * Purchase price: €57,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €900.80 Residual value: €10,980.00 If this offer interests you or you would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.4 kW (105.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 682 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 80.2 kW (109.04 HP), AIRCOOLED CHILLER/HEAT PUMP PANASONIC P-AQAZ0075HA.EC 77.4 KW/80.2 KW Cooling capacity: 77.4 kW / 22.01 tons (12/7 — 35°C) Heating capacity: 80.2 kW / 22.8 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland YP154K1T-TFD-GCV (scroll) + 1 pcs. Copeland YP182K1T-TFD-GCV (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Dimensions: 1.16x2.18x2 m Weight: 682 kg Working hours: 60/68 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Dcedpfx Ajzi Dq Aemnji The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.