Used Meat Bin Washer for sale (5,371)

Year of construction: 2010, condition: used, The Colussi Ermes L0130/017 Type 2414 is a machine from the Colussi Ermes brand, designed for automatic washing of bins and transport containers used in the food industry. How does the Colussi Ermes L0130/017 bin and vat washer work? The washer uses high-pressure washing technology, combining the mechanical action of pressurized water jets with chemical agents, allowing effective removal of even stubborn residues from the surface of bins and containers. The machine is designed to wash containers of various shapes, heights, and dimensions, including square, round, plastic, steel, and wheeled containers. The stainless steel construction with thick, insulated panels limits heat loss, while an advanced water extraction system allows the equipment to be reused almost immediately after a washing cycle is completed. Key advantages of the Colussi Ermes L0130/017 The Colussi Ermes L0130/017 can wash between 20 and 120 containers per hour, depending on the program used and the type of bins being washed, making it a flexible solution for plants of varying production scale. The ability to program individual washing cycles tailored to customer needs, along with responsible chemical dosing, reduces media consumption and environmental impact. Nodpfx Ajzudbxebyodc Continuous monitoring of the washing process in line with HACCP standards, along with a mechanical lift system that eases service access, increase the safety and convenience of operating the machine. Its robust stainless steel construction and energy-efficient washing programs with multi-stage water heating ensure reliable operation under intensive use. Technical specifications of the Colussi Ermes L0130/017 Manufacturer: Colussi Ermes Model: L0130/017 Type: 2414 Year of manufacture: 2010 Capacity: 20 – 120 containers/h Construction material: stainless steel, with insulated panels Compliance: process monitoring in line with HACCP standards Application of the Colussi Ermes L0130/017 bin and vat washer The Colussi Ermes L0130/017 is used in food industry plants, wherever regular and effective washing of bins and transport containers used for carrying and storing raw material is required. The machine performs well both in smaller facilities and in higher-throughput production lines.

Condition: used, Tote Bin Lifter for stainless steel meat bins Lifting height: 2050 mm Nodpfx Aeym U Afebyedc Total dimensions: 1050 mm x 900 mm x 2940 mm

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Ndjdpfx Abovvw Nieysc

Year of construction: 2002, condition: refurbished (used), NIMO-KG ID.NO. 1767 Nimo-KG in very good condition built-in mettler Toledo scale cells space for 4x sideboards + 1 sideboard in the middle. Completely in stainless steel hydraulic pistons. Ndsdpofigxtjfx Abyjc

Condition: excellent (used), NIMO-KG SKV200 MK Ndedjiz Awwepfx Abyoc ID.NO. 2470 Nimo-KG SKV 200 MK meatbin lifter for 200 liter meatbins. Dimensions W 130 D 120 cm Total height 400 cm. Tip height 302 cm.

Year of construction: 2020, condition: excellent (used), The Moba CTW6500 automatic industrial machine designed to denest, wash, stack, and dry plastic egg trays at a capacity of up to 6,500 trays per hour. High Capacity: Processes up to 6,500 plastic egg trays per hour to keep up with large egg grading and processing facilities. Full Automation Cycle: Automatically performs the entire handling and cleaning sequence, including de-nesting (separating stacked trays), washing with water and detergent, drying, and stacking clean trays for reuse. Hygienic Design: Built for poultry farms and packing stations to meet strict biosecurity and food safety standards by removing dirt, egg residue, and contaminants Complete and in good working condition Njdpfxez D Uuro Abyodc Shipping can be arranged

Condition: new, Unused bin washer. Bought for a contract which never materialised. Ndjdjtpv T Nopfx Abyjc

Condition: like new (used), Pneumatic meat bin lift Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Model: 200 liter Unloading height: 1.240 mm Capacity: 200 liter or 300 liter Njdsinup Dspfx Abysdc Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Condition: used, Itec Tote Bin Lifter / Tipper Tipping height adjustable from 1800mm to 2800mm Overall height 3000mm Floor mounted Stainless steel Ndedpswgnn Njfx Abysc Complete with control panel

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. Ndedjy Uk A Sjpfx Abyoc VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Ndsdjzuzl Ujpfx Abysc Supplied with various hole plates and other spare parts. Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A.

Condition: new, Unused twin dolav washer, still in its protective wrapping. Ndodsqxvwnopfx Abyec

Condition: used, functionality: fully functional, machine/vehicle number: 33142, mileage: 33,900 km, power: 335 kW (455.47 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, KROLL superstructure with water recovery: The mileage of the offered vehicles may vary, as some vehicles are currently being rented! Further comparable vehicles are available upon request. Ndsdpfx Abs Aaz Sceyoc Weight variant 28 t, engine OM470, regulated water pump, engine brake, gearbox lock for auxiliary drive, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assistant, attention assistant, Active Sideguard Assist, starting aid, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable, liftable and load-relieving 9 t trailing axle, axle load measuring device, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: 1st and 3rd axles 385/65R22.5, 2nd axle 315/80R22.5 Total tank volume 14 m³; closure bottom over the entire cross-section of the tank, which can be opened upwards with 2 hydraulic cylinders; lid locking with clamping claws, hammer-head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder; the unlocking can only be done under vacuum; level indicator: with 2 internal floats and an external scale; calibrated in 500 l steps for each piston position; discharge chute made of aluminum; emptying via pneumatically operated piston; piston with manhole DN 450 mm; tank division: locking of the pneumatic piston manually in 3 different positions; vacuum pump: VacuStar WR 2500 (2,500 m³/h at 400 mbar), water-cooled, mechanically driven via cardan shafts, lower and upper suction and discharge connections DN 100 with Perrot M coupling and blind cap, pneumatically operated; suction hose cassette with telescopic boom DN 125: the boom arm can be telescoped hydraulically up to 2,000 mm; the telescopic boom can be swiveled 180°, either together with the high-pressure hose reel or, after releasing a pneumatic lock, also independently of the high-pressure hose reel; the in- and out-movement of the suction hose is carried out hydraulically; incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling; sludge water drain DN 80; high-pressure pump: URACA P 3-45 (approx. 348 l/min at 205 bar), drive mechanically via cardan shafts, pipelines/fittings: water filling via a Storz-C connection; water pressure can be adjusted continuously; large HD hose reel: hydraulically swiveling 180°; hydraulically driven; speed adjustment continuously adjustable; pressure line to the reel in DN 32 mm; sewer cleaning hose: DN 25 mm - 240 m long; small hose reel: hydraulically driven with 60 m HD hose DN 13 mm; spray gun for max. 200 bar operating pressure; low water warning system; residual water emptying pneumatically via the compressed air system of the chassis; water recovery system "Kroll Recycling System WRS 1", all working functions fully automatic combined operation of suction and high-pressure cleaning, variable water and sludge chamber, emptying by discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention; rotating beacon mounted on the rear of the vehicle at the top; halogen work spotlights; removable and swiveling with 20 m cable; ambient lighting: 4 LED spotlights (one each on the right and left and on the boom); switchable from the control panel; control panel: mounted on the rear right of the superstructure and on the high-pressure hose reel; stainless steel with louver; illuminated; radio remote co

Condition: used, functionality: fully functional, machine/vehicle number: 34140, mileage: 10,900 km, power: 315 kW (428.28 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Ndodpfsz Hm I Nex Abyoc Chassis design for ADR, ADR type class FL including EX/II, EX/III and AT, weight variant 27 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, tire pressure control, front guard assist, radar on the side, starting assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5 Cab color is white, M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, pre-installation for alcohol tester, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-installation for toll collection, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Equipment and design according to ADR (tank code: L4BH); total tank volume 13.5 m³; closing bottom covering the entire cross-section of the tank, opening upwards with 2 hydraulic cylinders; lid locking with tension claws, hammer head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder, level indicator with 2 internal floats and external scale calibrated in 500 l increments for each piston position, discharge apron made of aluminum, emptying via pneumatically operated piston, piston with manhole DN 450 mm; 3-way adjustable piston with water/sludge volume division: position 1: approx. 10.3/3.2 // position 2: approx. 8.5/5.2 // position 3: approx. 6.5/6.5; vacuum pump: CVS VacuStar 1600L (1,550 m³/h at 400 mbar) water-cooled and mechanically driven, lower and upper suction and discharge connection DN 100 with TW coupling and blind cover pneumatically operated, suction connection for trailer operation at the rear left, suction hose cassette with simultaneous telescopic boom DN 125: the boom arm is hydraulically extendable up to 1,850 mm and hydraulically liftable up to 4,600 mm above the ground and can be swiveled 180°, either together with the high-pressure hose reel or independently of the high-pressure hose reel, incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling, sludge water drain DN 80 for pushing the dirty water back into the sewer via the boom, HD pump URACA KD 718G (333 l/min at 170 bar) mechanically driven, large HD hose reel hydraulically swiveling 180° and hydraulically driven with sewer flushing hose DN 25 approx. 180 m long; small hose reel hydraulically driven with 60 m HD hose DN 13 mm and spray gun, rotating beacon, removable halogen work light with 20 m cable, ambient lighting with 4 LED spotlights switchable from the operating platform, operating platform mounted at the rear right on the superstructure as well as on the high-pressure hose reel made of stainless steel with louvers, remote control.

Condition: used, Itec Boot & Sole Washer Entry and exit motion sensor activation Fully stainless steel Soap / detergent dosing facility E-stop Ndsdpfez Nx Iusx Abysc Ready for use

Condition: used, functionality: fully functional, machine/vehicle number: 30242, mileage: 99,900 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6c, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Combination sweeper/vacuum truck with water recycling system Njdpfx Aez Hnf Ajbyodc ADR equipment, engine D2676LF52, front suspension parabolic 9.5t, rear suspension air, differential lock rear axle, trailing axle steerable and liftable, hill start assist, lane keeping assist (LGS IV), disc brakes, MAN BrakeMatic, emergency braking signal (ESS), emergency brake assist (EBA2), ABS, ASR, ESP, exhaust pipe raised on the right, tires: steering axle 385/65R22.5, drive axle 315/80R22.5, tires 385/65 R 22.5 - 315/80 R 22.5, fuel tank 400 liters - 60 liters AdBlue, length/width/height 9.550/2.550/3.800 Cab: 2 seats, driver's comfort seat with air suspension, passenger seat static, central locking, cruise control, air conditioning, fine dust and pollen filter, tilting roof, speed limiter 90 km/h, TollCollect pre-equipment, digital tachograph Conti, MAN Tronic on-board computer, MAN Media Truck Advanced radio with Bluetooth and navigation, radio system, windshield, door windows and side windows tinted, electric door window lifts, sun visor, sun shield, mirrors heated and electrically adjustable, reversing camera, 2 rotating beacons on the cab roof Superstructure KROLL with water recycling: extension piston, 3-way adjustable piston with volume division water/sludge: approx. 3 m³ / 10 m³, 5 m³ / 8 m³, 7 m³ / 6 m³, filling level indicator in front of and behind the piston with internal float and external scale, hydraulically upward-opening full-size top cover with hammer head locking, lower suction connection, water treatment unit, all working functions fully automatically controlled via CAN-BUS technology (KROLL-CANMATIC), combined operation of suction and high-pressure flushing, variable water and sludge chamber, emptying by means of discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention, vacuum pump CVS water ring pump VacuStar WR 2500, suction capacity 2,500 m³/h with pneumatic pressure control valve, high-pressure pump URACA P 3-45 (approx. 348 l/min at 205 bar), hose reel cassette with simultaneous telescopic boom DN 125, large HD reel swiveling by 180° for 240 m DN 25, small HD reel for 60 m / DN 13, central control panel in stainless steel housing with louvre at the rear right, second control panel mounted on swiveling HD reel, remote control, discharge apron made of aluminum, closed hose box made of aluminum on the right, open hose box made of aluminum on the left, electric winch, rope pulley, vice, storage box, LED ambient lighting, LED work lights with 20 m cable and with approx. 15 m cable extension in drum, hand washing basin, ladder, fire extinguisher, reversing camera, rotating beacon at the rear.

Condition: used, functionality: fully functional, machine/vehicle number: 35539, mileage: 109,900 km, power: 310 kW (421.48 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, emission class: euro6, suspension: steel-air, loading space volume: 10.3 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Nsdjz Hm Rwepfx Abyodc Combination sweeper/vacuum truck with water recycling system Engine OM471, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, hill start assist, front axle 8t, 3-leaf springs, rear axle air-suspended, rear axle 13.4 t with differential lock, steerable and liftable 7.5 t trailing axle, axle load measuring device, rear underrun protection, pneumatically extendable M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), 2 seats, driver and passenger comfort seats, tinted windshield, sunroof, heated mirrors, electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, digital tachograph VDO, pre-installation for toll collection system, air conditioning, cruise control, speed limiter, reversing camera, rotating beacon on the cab roof Wall thickness 5 mm, diameter 1700 mm, material: stainless steel, fresh water tank 2.7 cbm, sludge tank 7.6 cbm, gross volume 10.3 cbm Water ring pump KWP 2000, flow rate 2000 cbm/h, max. vacuum 0.85 bar, max. pressure 0.5 bar The vacuum pump is installed in the fresh water tank and supplies itself with operating water, with additional sound insulation and cooling by water insulation. Suction and pressure operation is also possible in the tilted position. Automatic separator emptying when switching to pressure operation. Opening door with lever lock for quick access to the pump compartment. Pressure relief valve set to 0.5 bar. High-pressure system Kaiser pressure converter KDU 148-350. Flow rate up to 350 l/min at max. 200 bar. Lockable side box made of stainless steel on the right side of the tank, length 3,600 mm, control panel and holder for radio remote control, LED lighting, attachment tray for additional suction hoses, separator in front of the vacuum pump with automatic emptying, full-torque lid made of stainless steel with Kaiser clamping ring and float level indicator, suction and outlet connections NW 100 (pneumatically operated), tilting device for the body for quick emptying by means of a multi-stage hydraulic tilting cylinder, high-pressure hose reel with a capacity of 220 m (1") or 150 m (1/4").

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Nsdpfowplc Ajx Abyjdc Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Ndsdpfx Ajztwkdjbyjc Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction Njdpfxjuc Tn Ao Abysdc The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Njdpozkvl Iofx Abyodc

Condition: used, Year of construction: 2026, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg ATTENTION!!! Customer return: the machine is new and complete, but the housing is damaged. No warranty or returns! Ndedpfez Rwgxsx Abyjc

Condition: used, functionality: fully functional, machine/vehicle number: 32247, mileage: 540,900 km, power: 294 kW (399.73 HP), first registration: 10/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, loading space volume: 12 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Ndjdpfx Abjz Hmctoyec ABS, ASR, steel bumper, differential lock, reversing camera with a 5" color screen in the cab, cab with 2 seats, driver's seat with air suspension, sunroof, circuit breakers, additional 12V socket in the cab, voltage converter 24V/12V, radio-CD, mirrors heated and electrically adjustable, electric windows, tinted windows with band filter, dust box fixed on the engine tunnel, immobilizer with transponder, air conditioning, cruise control. Tank volume approximately 15 cubic meters, 3-way adjustable partition with manual locking, division of water/sludge in cubic meters 2.5/11.5; 6.5/7.5; 8.7/5.3, full-size lid with hydraulic locking, upper and lower suction connection DN 100, flanged. An intermediate drainage is possible via the upper suction connection (sludge water can be pushed back into the sewer). Vacuum pump Samson V21 (1150 cubic meters/hour), mechanically driven, suction hose cassette DN 100, approximately 18 m long, lying flat on the tank with hydraulic roller drive, permanently mounted suction hose guide above the HD reel, HD pump URACA KD 716-G 60 (330 l/min at max. 170 bar), large hose reel on the bottom flap (120 m HD hose DN 25), hydraulically driven and hydraulically pivoting, with cross-lead spindle and hose deflection roller, small hose reel with 60 m HD hose DN 13, manually driven. A control panel made of stainless steel, mounted on the rear right of the superstructure, with all relevant control elements, a second control panel made of stainless steel, mounted on the large hose reel, and a remote control with the functions vacuum pump on/off, HD pump on/off, engine speed +/- , upper suction connection open/close, emergency stop specifically for the use of the vehicle as a suction truck, hose box on the left over the entire length, tool boxes on the right over the entire length with an open hose box above, storage box and stone box, ladder and vise, spray gun and hand washing facility, a work light at the rear, a work light on the right and left as ambient lighting, rotating beacon at the rear.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm Ndedpfxo Aba Hnj Abyoc • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Ndjdpfezl Tb Nsx Abyoc Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc