Used Macc Special 411 Cso for sale (9,816)

Condition: new, MACC SPECIAL 411 CSO band saw with gravity feed New, CE compliant The key features of the machine (blade support rigidity, flywheel sizing, band guide, band tensioning) have been the subject of careful study in order to prevent band stress, increase its lifespan, improve cutting linearity, and reduce cutting time. – Band saw with arc-cut, adjustable by a hydraulic circuit, manual bar feed and vice closure, manual head return – Vertical rotation on a pin with adjustable tapered roller bearings, free of play – Band drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear Dsdpfx Asficb Tsa Hjcl – Appropriately sized flywheels – Robust band guides made with sealed guide bearings and adjustable carbide inserts – Band tension obtained via an electromechanical device with a microswitch-controlled blade rotation – Vice with quick-feed device – Safety device on the flywheel cover, on the control handle, and on the blade – Hydraulic cylinder for controlled descent – Cutting thickness 1.2 mm – Cutting range 45° left, 60° right – Adjustable stop for cuts of the same size – Low-voltage 24 V system – 0.06 kW electric pump for band cooling – Stand with drawer for chip collection and removable tank for coolant – Machine designed for movement with a pallet truck

Condition: used, Year of construction: 2007, Used semi-automatic band saw MACC special 650di Djdpeyzadljfx Aa Hecl Cutting angle from -60° to +60° Blade dimensions: 5270 x 34 x 1.1 mm Digital angle display Cutting capacity at 0° - round 460mm - square 450x450mm - rectangle 620x450mm Machine weight: 1250kg The machine is fully serviced.

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: Dcjdpfx Aefh R Tyea Hjl 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range: 45° left to 60° right Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, saw band length: 6,380 mm, Highly efficient semi-automatic bandsaw with excellent cutting precision for processing medium and large bars and profiles. The robust construction and vertically guided bow on two columns provide the machine with the necessary rigidity and accuracy of the sawing unit. - Motor power: 4 kW - Saw blade size: 6380x41x1.3 mm - Maximum cutting angle: 45° right - 60° left - Appropriately dimensioned flywheels - Chip cleaning unit with brush - Machine features automatic rotation for programmed mitre cuts - Minimum quantity lubrication - Chip conveyor Dcsdpfx Aoxr Uk Sea Hol !Attention, the offer includes only the machine; roller conveyors and length stops can be purchased separately.! The new price of the machine is EUR 53,140.--

Condition: excellent (used), Year of construction: 2004, saw band length: 2,825 mm, High-performance mitre band saw Fully hydraulic semi-automatic Technical data: Cutting capacity: Dcsdpex H Rpisfx Aa Hsl Round tube 90° – 230 mm, 45° – 200 mm Rectangle 90° – 300 x 170 mm, 45° – 190 x 150 mm - Cutting speed: 40 + 80 m/min - Saw band dimensions: 2825x27x0.9 mm Equipment: - Double mitre, right up to 60°, left up to 45° - Quick approach vice for material clamping - Base frame with electric coolant immersion pump and check valve - Semi-automatic operation via steplessly adjustable lowering cylinder, with shut-off via limit switch

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Dcedpfezvc R Ujx Aa Hsl Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Dcsdpfx Aozwvtxea Hol Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) Dedpfxsy Ipy Ao Aa Hscl • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, control type: CNC control, actuation type: pneumatic, rotational speed (max.): 3,000 rpm, overall weight: 640 kg, Equipment: CE marking, documentation/manual, The MACC TA 400 A CNC is an automatic circular saw designed for cutting aluminium and non-ferrous materials in industrial serial production. Main Technical Data Parameter Value Machine Type Automatic CNC circular saw for aluminium Blade Diameter Ø 400 mm Blade Bore 32 mm Motor Power 2.2 kW Power Supply 3 × 400 V Blade Speed 3000 rpm Vice Opening 180 mm Cooling System Emulsion cooling system Clamping System 2 pneumatic vices Weight Approx. 510–640 kg Dcedpfx Aaey Uvqzo Hol Machine Dimensions Approx. 3450 × 1700 × 1420 mm Cutting Capacities at 90° Profile Type Capacity Solid Round Material 60 mm Tube / Round Profile 140 mm Square Profile 110 × 110 mm Rectangular Profile 180 × 100 mm

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Dedpfjfww Sqox Aa Hscl Please do not hesitate to contact us.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom Dcodpfjzmkxhsx Aa Hol LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Year of construction: 2023, condition: ready for operation (used), Offered is a semi-automatic metal circular saw. Saw blade diameter: 350mm, vise opening max.: 170mm, control: semi-automatic. Equipped with hydraulic vise, integrated coolant system, control panel. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1000mm/1200mm/2000mm. Inspection possible by arrangement. Dodpfx Aey Uyfcoa Hscl

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 hp / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High-performance instruments: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator on the display (Voltage, amperage and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable capacity 64 liters - Lockable tank cap Dcodeywfxyopfx Aa Hol - Fuel filler neck, splash guard - Exhaust outlet to the rear - 2 foldable wheel chocks, transport mounting - Marker lights on the rear and sides - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4395 mm, measured from the drive axle / 1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value / max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pole - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Venting pump electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual interventions in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min, for vehicles/combinations with increased air requirements - Air intake at the front with normal air filter - Alternator 150A/4200W - External noise acc. to ECE R51.03 Phase 2, with low-noise certificate and L-sign - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN at the rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: Seats in fabric, side panels in vinyl (blue/dark blue) with interior in fabric grey - Driver seat comfort, air-sprung, heated, seat belt in the seat - Passenger seat standard, air-sprung - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Stand-alone cab heater, 2 kW - Storage spa

Year of construction: 1989, condition: used, functionality: unexamined, Edgebander for mouldings by P.A.O. MACC model DC 4C Dsdpfx Asytc Dkoa Hocl

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Dsdpfx Aajy Eqtio Hjcl

Condition: new, Showroom promotion... NEW, unit No. 1 available for immediate delivery. CE certified. The MACC SPECIAL 335 MS is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor and a special gearbox complete with a bronze gear, hardened, and ground worm screw. The appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable Widia inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned with the rotation of the blade. Equipped with a safety device on the flywheel cover and the blade, the machine is completed with a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor; 2. lowers the saw arm for cutting; 3. the saw arm returns to the starting position; 4. stops the bandsaw motor; 5. opens the vice. Manual cutting is also possible. Cutting speed (m/min): 38-77. Cutting thickness (mm): 1.2. Cutting range: 45° left, 60° right. Stop for cutting the same size: adjustable. Electric pump for bandsaw cooling: 0.06 kW. Cutting capacity at 0° (round, square, rectangular): 260 / 250x250 / 220x330. Cutting capacity at 45° left (round, square, rectangular): 225 / 210x210 / 160x225. Cutting capacity at 45° right (round, square, rectangular): 215 / 200x200 / 160x210. Cutting capacity at 60° right (round, square, rectangular): 130 / 130x130 / 130x140. Blade dimensions: 3010x27x0.9. Weight [kg]: 415. Dsdpfxog S Ui Ae Aa Hecl

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall Djdpfjwtairox Aa Hjcl • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Dsdpfxsfibfaj Aa Hjcl Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Dedjx A Nntjpfx Aa Hscl Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately Dcsdpfx Aaswuhxwe Hsl MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets 6 x lashing eyes, 6500 daN Toolboxes Trailer coupling (AHK) Storage compartments Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: new, mileage: 500 km, power: 367 kW (498.98 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 6x6x6 all-wheel drive with Fassi crane with jib and winch New vehicle with daily registration 07/2024 Long-haulage cab Removable flatbed Can be used as a tractor unit Tatra specifications coming soon Crane: Fassi F545RA2.27 Stability control V7 remote control Dsdpfjzgzbgsx Aa Hocl Jib / auxiliary boom L214, 4-way V20 winch with 60 m cable AWC Front outriggers 5-way outriggers etc. Further information coming soon.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 89336, Offer 25433 Technical specifications: - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm Dcodpfoxx Sgkox Aa Hol - Cutting range at 90°: - round: 110 mm - flat: 120 x 80 mm - Cutting range at 45°: - round: 80 mm - flat: 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Manual saw blade feed - Material clamping vice - Drive: 400 V / 1.8 / 2.4 kW - Coolant system - Space requirement: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 2009, machine/vehicle number: 87376, Offer 23330 Technical Data: - Semi-automatic sawing machine with hydropneumatic feed - Saw blade feed – vise - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting capacity at 90°: round 110 mm; flat 120 x 80 mm - Cutting capacity at 45°: round 80 mm; flat 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Infinitely variable saw blade feed - Pneumatic material vise - Electric foot switch - Pneumatic connection: 6 bar - Drive: 400 V / 1.4 / 1.8 kW - Coolant system - Space required: approx. W 1000 x H 1500 x D 1200 mm Dodpfxexx R Tis Aa Hecl - Weight: approx. 300 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition Dcjdpfx Aajzung Es Hol With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: excellent (used), functionality: fully functional, Measuring machine based on Zoller V520, including a fixture for pre-setting and measuring the grippers of the DMP60VLinear tool changer. It features 2 linear axes and 2 rotary axes and is supplied complete with a PC and Zoller Multivision II. The digital display for the two rotary axes is not included in the scope of supply and can be purchased separately. Dcsdpfx Aajzvdbbj Hel