Used Lp 60 Vh1 for sale (21,883)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Hsdpfevn Tg Iox Aicsnk Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hnodpfx Aievgrh Uecek Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Hnsdpfxov T I Evj Aicjk Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm Hnjdpsnah A Hofx Aicsk -Weight: 0.8 kg

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Hjdpfodux Dujx Aicenk Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; suitable for volumes from 100-1000ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 50-200mm; bag size: max. L50-250xW50-200mm; without air pressure; 220V, 1.95kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L1120xW920xH2050mm; weight: 500kg Hedpfev Nmzhsx Aicjnk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), machine/vehicle number: WJME2NPT00C038434, mileage: 797,354 km, power: 250 kW (339.91 HP), first registration: 10/1997, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,700 mm, Year of construction: 1997, Equipment: ABS, air conditioning, crane, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics Hsdpey Amvksfx Aicenk = Remarks = Crane Number of hydraulic extensions: 2 = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Crane: FASSI F 95.22 Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition. Hnodpeudbzyefx Aicsk

Condition: good (used), Homogenizer APV Rannie BLP 63.60 Manufacturer: APV Homogenisers AS Model: Rannie BLP 63.60 Machine type: Homogenizer Hnedpfx Aieyxvp Socsk Serial number: 1.97.187 Year of manufacture: 1997 Max. pressure: 70 bar Available quantity: 4 Previously used in margarine production. 3-piston process pump - for highly viscous food products - featuring: relatively high throughput, moderate pressure, hygienic design Well suited for: - Margarine / Butter / Spreads - Creams / Pastes - Chocolate (conditionally) - Viscous emulsions

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,300 kg, first registration: 04/2026, color: black, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 1,979 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Internal Number: 48217 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * Heated steering wheel * Panoramic roof, non-opening * Radio: B&O Sound System with 15 speakers and up to 1000 Watts * Wheels: 7.5 J x 19 alloy wheels in sport design, matte black * Electric sliding door on right and left – with hands-free function and including sunshade blinds in the 2nd row of seats – Ford Key Free System (keyless entry/locking) including Ford Power Start function * Technology Package 6: Exterior mirrors electrically adjustable, heated and power-folding – Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation – Blind Spot Assist including CTA reverse emergency braking assistant – Pre-Collision Assist, camera and radar-based – Driver fatigue alert – Lane departure, lane keeping and lane change assistant, lane centering pilot – Traffic sign recognition – Wrong-way driver warning – Park Pilot System front/rear – Adaptive cruise control including Stop&Go function – Intelligent speed limiter with speed limit display – 360-degree camera – Steering wheel in Sensico leather look FURTHER EQUIPMENT * 2 grab handles on driver and passenger sides * 2-stage unlocking for passenger and cargo area * 3 USB ports for the 2nd row of seats * ABS * Front storage compartment * Passenger airbag with deactivation function * Driver airbag * Battery: H7 AGM single battery * Roof console * Thatcham-approved anti-theft alarm system – with interior monitoring in driver’s cab and cargo area including central locking with double locking * Front electric windows – with quick up/down function * Electronic parking brake * FordPass Connect – WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * GT stripes on the bonnet, lower front bumper and tailgate – including side decorative stripes Hjdpjx Sbbtofx Aicenk * Lockable glove compartment * Heated rear window * Rear spoiler * Interior lighting in passenger compartment * Front interior lighting * 3-zone automatic climate control – with automatic temperature regulation for driver, front passenger, and rear, individually adjustable – with auxiliary heater – with R-1234yf refrigerant – Electric supplemental heater – Electric temperature control in rear * LED rear lights * LED headlights – LED high beam – LED low beam – LED daytime running lights including integrated front LED indicators – Static cornering light – High beam assist * Charging cable, single-phase, length: 5m * Inductive charging station in the center console for mobile devices * Large center console * Emergency call assistant eCall emergency system * Rear seat package 19: 6 rear seats, includes: 2nd row, 3 individual seats, center seat with folding table on backrest – 3rd row with 3 individual seats * Picnic lights * Tire repair kit * Tire pressure monitoring system * Windscreen wipers with rain sensor * Sliding door with power close assist * Rail-based flexible seating system * Fixed side windows, second and third row * Seat package 19: Driver's seat electrically adjustable in 5 ways – Passenger individual seat, manually adjustable in 4 ways – Heated seats for driver & passenger – Armrests inside and outside – Driver's lumbar support electrically adjustable & passenger manually – Passenger airbag, side airbags right and left, front head-shoulder airbags right and left – Partial synthetic leather trim Sport, seat center panel in Digital Aqua fabric, upholstery in synthetic leather/ve

Condition: used, mileage: 42,709 km, power: 160 kW (217.54 HP), first registration: 02/1977, fuel type: gas, color: red, gearing type: automatic, number of seats: 5, Equipment: air conditioning, * €17,500 * Cadillac Eldorado 8.2 V8 160 KW LPG Gas Chrome, Air Conditioning * Air Conditioning * Electric Seats * Electric Windows * Electric Mirrors Hodpsx Rfn Uofx Aicjnk * Cruise Control * Vehicle Number: OPENING HOURS Monday - Friday from 9:00 AM - 5:00 PM (by appointment...) CONTACT DETAILS Phone: WhatsApp: Email: Export and customs license plates (export number) available here. Errors and prior sale excepted. Technical specifications and equipment features must be checked separately. The contractual condition is only that which is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 171 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW | 25 kN centrifugal force | 600 mm working width | Hatz diesel engine 1B20 with 3.1 kW output Article number: 5000610038 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2560 Hts Condition: NEW Operating weight: 171 kg Frequency: 90 Hz Centrifugal force: 25 kN Working width: 600 mm Engine: Hatz 1B20 diesel engine Engine power: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty compaction Surface coverage: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust design – ideal for daily construction site use - 600 mm working width – high surface coverage in a compact form - Ergonomic guide bar – low vibration & comfortable handling - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality, immediately available Fields of Application: ✓ Paving and medium-sized areas ✓ Landscaping and gardening ✓ Municipal applications & construction companies ✓ Fibre-optic & cable installation ✓ Compaction tasks on small to medium-sized sites Hnodpfx Ajyyqnroicok Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Price ex-works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information subject to change. Errors and prior sale excepted. Prices are net of VAT / VAT excluded Other models and sizes available! Also in stock: DPU 3060, DPU 3760, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 2560 Hts NEW | Diesel vibratory plate 25 kN | Vibrating plate 600 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving work Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new equipment! A virtual inspection of the machine via video call is available upon request.

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 256 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3760 Hts Vibratory Plate – NEW | 37 kN Centrifugal Force | 600 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item Number: 5000610358 Technical Data: Manufacturer: Wacker Neuson Model: DPU 3760 Hts Condition: NEW Operating Weight: 256 kg Frequency: 90 Hz Centrifugal Force: 37 kN Working Width: 600 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium Compaction Surface Performance: approx. 624 m²/h Features & Equipment: - Powerful diesel vibratory plate for demanding compaction tasks - Robust construction – ideal for daily use on construction sites - 600 mm working width – high surface coverage with a compact design - Ergonomic guide bar – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-sized surfaces ✓ Landscaping & horticulture ✓ Municipal use & construction companies ✓ Fiber optic & cable installation ✓ Compaction work on small to medium construction sites Options: Additional price only in combination with machine: - EquipTrack Beacon: €49.00 Hedpfx Aijyyqdtjcjnk ➡️ EquipTrack is a Bluetooth-based system for capturing operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally upon request Price ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Further models and sizes available! DPU 6260 etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 3760 Hts NEW | Diesel Vibratory Plate 37 kN | Compaction Plate 600 mm Working Width | Hatz Engine | Wacker Neuson Compaction Technology | Vibratory Plate for Paving Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new machines! Virtual machine inspection via video call available on request.

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 190 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3060 Hts Vibratory Plate – NEW | 30 kN Centrifugal Force | 600 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item number: 5000610042 Technical Data: Manufacturer: Wacker Neuson Model: DPU 3060 Hts Condition: NEW Operating Weight: 190 kg Frequency: 90 Hz Centrifugal Force: 30 kN Working Width: 600 mm Engine: Hatz 1B30 Diesel Engine Engine Output: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium duty Surface Capacity: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction tasks - Robust construction – ideal for daily use on construction sites - 600 mm working width – high surface coverage with a compact design - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving & medium-sized areas ✓ Landscaping & horticultural construction ✓ Municipal work & construction companies ✓ Fiber optic & cable installation ✓ Compaction work on small to medium-sized construction sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally on request Price ex-warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information provided without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! We also carry DPU 3760, DPU 5260, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 3060 Hts NEW | Diesel Vibratory Plate 30 kN | Plate Compactor 600 mm Working Width | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Hnodpfx Aisyyqdajcek Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new stock! Upon request, we are happy to arrange a virtual inspection of the machine via video call.

Condition: new, Year of construction: 2026, 0460 mm 1500 mm 230 mm 78 mm 400 mm 2200 U/min Hsdsyu U Dxepfx Aiconk D1-8 DIN 55029 95 mm 145 mm

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,300 kg, first registration: 01/2026, color: grey, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 1,979 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Internal Number: 41963 Errors and prior sale excepted! ---LOCATION: 04758 Oschatz, Filderstädter Straße 10 Contact number for enquiries: Hsdpfx Asx Sbb Teiconk Mr. Enrico Schieler: 03435 ? 90 90 22 or schieler(at)---- SPECIAL EQUIPMENT * Electrically swiveling tow bar * Heated steering wheel * Panoramic roof (fixed, non-opening) * Radio: B&O Sound System with 15 speakers and up to 1000 watts output * Wheels: 7.5 J x 19 alloy wheels in Matte Black Sport Design * Electric sliding doors left and right, with hands-free function and integrated sun blinds in 2nd row - Ford Key Free System (keyless entry/locking) incl. Ford Power Start function * Technology Package 6: Exterior mirrors electrically adjustable, heated, and foldable – Audio system with 13-inch multi-function display, Ford SYNC 4 with navigation – Blind spot assist incl. CTA reverse emergency braking – Pre-Collision Assist with camera and radar base – Driver fatigue alert – Lane keeping, lane change, and lane pilot assist – Traffic sign recognition – Wrong-way warning function – Front/rear park pilot system – Adaptive cruise control with Stop&Go function – Intelligent speed limiter with speed limit display – 360-degree camera – Sensico leather-look steering wheel ADDITIONAL EQUIPMENT * 2 grab handles on driver and passenger side * 2-step unlocking for passenger cabin and cargo area * 3 USB ports for 2nd seat row * ABS * Front storage compartment * Passenger side airbag with deactivation function * Driver airbag * Battery: H7 AGM single battery * Roof console * Thatcham category theft alarm system with interior monitoring in cab and cargo area, including central locking with double locking * Power windows at front with quick up/down operation * Electronic parking brake * FordPass Connect - Wi-Fi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * GT stripes on the hood, lower front bumper and rear tailgate including side accent stripes * Lockable glove box * Heated rear window * Rear spoiler * Interior lighting in passenger compartment * Front interior lighting * 3-zone automatic climate control - separate automatic temperature control for driver, front passenger and rear - including auxiliary heater - R-1234yf refrigerant - auxiliary electric heater - separate rear electric temperature regulation * LED rear lights * LED headlights - LED high beam - LED low beam - LED daytime running lights with integrated LED indicators at front - static cornering light - high beam assistant * Charging cable, 1-phase, length: 5m * Inductive charging station in center console for mobile devices * Large center console * Emergency call assistant (eCall system) * Rear seat package 19: 6 rear seats, incl. 2nd row with 3 individual seats, center seat with folding table on the seat back - 3rd row with 3 individual seats * Picnic light * Tire repair kit * Tire pressure monitoring system * Windshield wipers with rain sensor * Sliding door with soft-close aid * Rail-mounted flexible seating system * Fixed side windows, second and third row * Seat package 19: Driver’s seat, 5-way electrically adjustable - front passenger single seat, 4-way manually adjustable - seat heating for driver and passenger - armrests inside and outside - driver's lumbar support electrically adjustable, passenger lumbar support manually adjustable - passenger airbag, side airbags left and right, co...

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Hjdpfx Aonxkcqjicenk Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC con-rod bearing grinder. Technical details: crankshaft length 600 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16t. Hsdpfx Aijym Spiscenk

Condition: good (used), mileage: 695,508 km, power: 338 kW (459.55 HP), first registration: 03/2019, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - CarPlay - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Hydraulic system - Manual - Power take-off (PTO) - Pump - Radio/cassette - Sleeper cab - Lane departure warning - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,496 kg, Gross weight: 18,000 kg, Total tank capacity: 580 liters, Chassis height: 96 cm, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning, Seat heating, Engine power: 338 kW (453 hp), Fuel: Diesel, Emission standard: Euro 6, Transmission type: Automatic, Gearbox type: Scania, Gears: 14, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, Pump, Seat configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: SCA, 14 gears, automatic Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire tread: 5 mm; Right tire tread: 5 mm; Suspension: Leaf Axle 2: Twin-tired; Left inner tire tread: 9 mm; Left outer tire tread: 9 mm; Right inner tire tread: 7 mm; Right outer tire tread: 12 mm; Suspension: Air suspension Weights Unladen weight: 7,496 kg Payload: 10,504 kg Gross vehicle weight: 18,000 kg Functionality Pump: Yes Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 2 Financial Information Lease price: €334 per month (default, 60 months); Please ask for further details and conditions Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. You can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more… Hsdpoxv R Dvefx Aicsnk Please visit our website for special offers and our full inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2025, Fiber laser machine for pipes YLT 6025 - AVAILABLE IMMEDIATELY high quality equipment Laser power: 4kW for pipes and profiles 6200mm length × 20-250mm diameter round 6200mm length × 20mm-200mm square automatic loading 3000-6200 automatic unloading 0-4000mm Equipped with: Precitec Auto Focus cutting head IPG resonator with 4kW incl. guarantee THX tours Siemens control CE safety overTÜV Süd is included: warranty CAD CAM software Installation Hnedpfeywucnjx Aicjk Delivery within EU Training offered We have been looking after YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine under power at any time. Come and visit us!

Condition: used, mileage: 93,000 km, power: 180 kW (244.73 HP), first registration: 06/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro3, loading space volume: 6 m³, Year of construction: 2002, Equipment: ABS, MAN ME 18.250B 2-axle suction/pressure, Kroll body tiltable, 6000 liters, HD pump Speck, vacuum pump Gardner Denver Wittig, high pressure hose DN13 / 40m, wheelbase 3.90m, auxiliary driveM differential lock, Euro3, manual transmission, differential lock, leaf air suspension, single-family home Hnsdpfx Aisvxng Docjk

Condition: good (used), mileage: 747,710 km, power: 338 kW (459.55 HP), first registration: 06/2019, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 5,940 mm, total width: 2,550 mm, total height: 3,230 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Hydraulic system - Manual - PTO (power take-off) - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,551 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 580 liters, Fifth wheel height: 113 cm, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Engine power: 338 kW (453 HP), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Gearbox: Scania, Gears: 14, Power steering, ABS, ASR, Hydraulic system, PTO (power take-off), PTO type: 1, Starter battery, Pump, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further Information = Hnsdexvximopfx Aicsk Transmission Transmission: SCA, 14 gears, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire tread: 9 mm; Right tire tread: 10 mm; Suspension: Leaf suspension Axle 2: Twin tires; Left inner tread: 7 mm; Left outer tread: 6 mm; Right inner tread: 3 mm; Right outer tread: 8 mm; Suspension: Air suspension Weights Unladen weight: 7,551 kg Payload: 10,449 kg gross vehicle weight (GVW): 18,000 kg Functional Pump: Yes Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 2 Financial Information Lease price: €296 per month (default, 60 months); Please inquire for further information and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? It’s simple! • Large and rapidly changing inventory • Recognizable quality • Competitive prices • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration numbers organized quickly • Expert technical services • The security of 'recognizable quality' • And more… Please visit our website for special offers and the complete stock. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 714,424 km, power: 338 kW (459.55 HP), first registration: 03/2019, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 6,030 mm, total width: 2,550 mm, total height: 3,220 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Hydraulic system - Manual - Power take-off (PTO) - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Additional braking system = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,511 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 580 liters, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of lockable differentials: 1, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Engine power: 338 kW (453 HP), Fuel: Diesel, Euro: 6, Transmission: Automatic, Transmission type: Scania, Gears: 14, Additional braking system, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 14-speed, automatic Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; tire tread left: 9 mm; tire tread right: 7 mm; suspension: leaf spring Axle 2: Dual tires; inner tire tread left: 7 mm; outer tire tread left: 8 mm; inner tire tread right: 4 mm; outer tire tread right: 7 mm; suspension: air suspension Weights Kerb weight: 7,511 kg Payload: 10,489 kg Gross vehicle weight: 18,000 kg Functionality Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €296 per month (default, 60 months); Please inquire for further details and terms Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our portfolio includes all European makes, model years, and price categories. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates are arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the full inventory: Hnodpfxsxvxh Aj Aicjk Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rates and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller Hjdpjyz Sfbefx Aicjnk - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs - Max. thickness of workpiece: 210mm Hnodpoytd Uqjfx Aicek * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)