Used Jaroma Dsmc 60 for sale (21,830)

Condition: excellent (used), Catalog number: 8109 TECHNICAL DATA - Shaft width 640mm - Number of knives 4 pcs - Max. thickness of workpiece 250mm * From above: - Pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * From below: - 2 pcs adjustable rollers in the lower table - Main motor 5.5kW - Electric table lifting - 2 types of feed speed Fedpfxez A Ehyj Aivepn - Diameter of dust extraction port 160mm - Dimensions L/W/H 1200x1250x1400mm - Weight 980kg ADVANTAGES - Polish production - Electric table lifting - Used thicknesser, very good condition Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 7303 TECHNICAL DATA - Shaft width 640mm - Number of knives 3 pcs - Max thickness of the workpiece 250mm From above: Fedpfx Aezxg S Ujivopn - Pawls - Toothed infeed shaft, pulling type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pulling type From below: - Adjustable rollers in the lower bed, 2 pcs - Motor 7.5kW - Electric bed lifting - Lifting motor 0.75kW - 4 feed speed types - Feed motor 1.5kW - Diameter of the dust extraction nozzle 140mm - Dimensions L/W/H 1120x1250x1680mm - Weight 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm Fpsdpfxjzu Sgpe Aivjn – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 4,700 kg Service valid until: 05/2027 Fsdpoz Iwqkofx Aivopn Safety inspection valid until: 05/2027 Operating hours: 5,917 h EQUIPMENT Former Still full-service unit 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear If the mast is too high, it can be dismantled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged if collection is not made on time. Outstanding storage fees must be paid in full before collection. Lot number: 159

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Fodpfjz I Ti Ajx Aivspn Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Fedpfsz Ekb Djx Aivjpn Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma Fedjiq Dk Sopfx Aivjpn - Technical Documentation TECHNICAL PARAMETERS: shaft width: 630 mm detail thickness: 240 mm 4 shaft knives: knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW electric height adjustment: two types of feed speed: dimensions (length/width/height): 120/128/125 cm weight: 1060 kg

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Fpodpfx Aioh S Uhfsven Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Machine category Edgebander Location Fpsdpfsgyz Rkjx Aivsn Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: used, Year of construction: 2022, functionality: fully functional, For sale, starting from our location in 45888 Gelsenkirchen, are two Inject Star P-60 residual meat recovery systems, including bone crushers and accessories. These systems are used, manufactured in 2019 and 2022, and come from a business liquidation. Currently, both systems are still operational and can be inspected on-site by appointment. Fedpfez Iz Tcsx Aivepn Disassembly, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: Fodpfx Aisz Ix Ukovspn For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm Fpjdpfx Aijz N Dqujven glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. Fpedez H Rp Dspfx Aivon 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps.

Condition: excellent (used), CATALOGUE NUMBER 7573 Fjdjztw I Nepfx Aivopn Technical specifications: - shaft width 640mm - number of knives 4 pcs - max. thickness of workpiece 270mm - from above: - pawls - toothed infeed shaft, pull-type - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pull-type - from below: - adjustable rollers in the lower table, 2 pcs - motor 7.5kW - electric table lifting - lifting motor 0.75kW - 2 types of feed speed - feed motor 1.1kW - diameter of dust extraction port 160mm - dimensions L/W/H 1150x1240x1170mm - weight 1073kg ADVANTAGES - Polish production - electric table lifting - DTR documentation - used thicknesser, very good condition Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2005, Technical specifications Fpedpfx Aijyi U Rzoven Motor power (kW): 4.0 Spindle speed (rpm): 1300/2500/3500/5000/6000/8500 Machine weight (kg): 440 Side carriage Machine dimensions (L x W x H, mm): 1200 x 800 x 1080 Table dimensions (mm): 1200 x 700 Year of manufacture: 2005

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Fsdpey Nlp Asfx Aivepn Planing width: 40 cm 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Maximum planing height: 170 mm Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: good (used), Jaroma Thicknesser Fpodjztaktspfx Aiven Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Machine ready for operation.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Fpodpez Hq Akefx Aiven Price on request.

Condition: used, Year of construction: 1993, operating hours: 30,703 h, functionality: fully functional, bale height: 700 mm, input voltage: 400 V, input current: 85 A, operating pressure: 250 bar, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Avermann AVOS BP 1411-60 baling press with conveyor belt, manufactured in 1993, for sale. Fpjdoz H Ardjpfx Aivjn If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is expected to be dismantled and prepared for loading at the beginning of November. Inspections can be arranged prior to this date.

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Fpedpoz Inm Ajfx Aivsn

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Fedpfjz Ixqxsx Aivjpn Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350 153 09 095, overall weight: 180 kg, input voltage: 400 V, We are offering this ready-to-use Meurer CMW/AL 60/40 angle welding machine, manufactured in 1995. Manufacturer: Meurer Model: CMW/AL 60/40 Year of manufacture: 1995 Welding current range: 60–400 A Open-circuit voltage: 60 V Mains voltage: 400 V Frequency: 50 Hz Duty cycle: 60% at 400 A Protection class: IP21 Fodpfx Asz Ii Uzoivepn Weight: 180 kg If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us.

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Fjdpfx Aez N Swioivjpn Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD Fjdpfxou Hautj Aivopn type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: used, machine/vehicle number: 008579, Work shaft length: 100 mm Motor power: 5.9 KW Fjdpfx Aiszylwrsvjpn Tilting shaft: yes