Used Hugong Intecut-Ht for sale (1,707)

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, Ncodpsu Hz Tqofx Aiyeu higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Year of construction: 2022, Ref: 11103 . 2022 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 500,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour Ncedsy T H Uhjpfx Aiyju

Condition: excellent (used), AdBlue Refueling Vehicle Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle workshops: the MOBILUS AdBlue system allows for safe and economically efficient refueling of your vehicles. The mobile refueling system MOBILUS AdBlue complies with all relevant technical and legal regulations and is therefore also used in research and development projects. Convince yourself of the quality of this mobile urea refueling unit. Technical data: Manufacturer: Rietbergwerke GmbH & Co. KG Type: HT-Mobilus 200 AdBlue Year of manufacture: 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135 cm Empty weight: approx. 260 kg Usable volume of the tank: approx. 175 liters Power supply: Connected load: 3.0 kW Connection voltage: 400/230 V / 50 Hz NPE Fuse rating: 16 A Heater: Connected load: 4.0 kW Connection voltage: 400 V Delivery pump: Power: 0.75 kW Supply voltage: 400 V / 50 Hz Additional technical data: Suction and circulation pump: Power: 0.4 kW Ncjdszgcl Hepfx Aiysu Supply voltage: 230 V / 50 Hz Dispensing valve: Flow rate: max. 40 l/min Operating pressure: 0.5 – 3.5 bar Control range: Flow rate: 3.5 l/min. – 45.0 l/min Temperature: 15 °C – 45 °C Frequency converter: 1,800 1/min BNC sockets: Output: 0 – 10 V Temperatures: Operating temperature: max. 45 °C Storage temperature: up to -30 °C Materials: Tank: LDPE all other parts in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, power: 121 kW (164.51 HP), fuel type: diesel, Year of construction: 2021, operating hours: 7,166 h, Make of engine: Cummins Top speed: 40 km/h Ncsdpfx Aiezg Ag Doyju Production country: UK Please contact Kristoff Van Havere for more information - Hydraulic quick hitch - Bucket - Auxiliary piping - Central grease system - Reversable fan

Condition: excellent (used), Here, we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Ncodpfxjzd R Uwo Aiysu Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -65°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Type: HT 7012 S2 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature control of the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber +50°C to +220°C Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Ncedpfx Aijzd R Azeyeu Type: HT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, power: 98 kW (133.24 HP), fuel type: diesel, overall weight: 14,010 kg, operation weight: 14,010 kg, number of seats: 1, Year of construction: 2007, operating hours: 4,244 h, Hamm 3412 HT VIO / Roller / 14 TO. • Manufacturer: Hamm • Model: 3412 HT VIO • Year of manufacture: 2007 • Operating hours: 4244 hours • Power: 98 kW / 133 hp • Travel speed: 11.9 km/h • Engine: Deutz 4-cylinder diesel engine • Wheel arrangement: 4x4 • Roller diameter: 1.5 m • Roller width: 2.14 m • Transport dimensions: L: 5.85 m x W: 2.25 m x H: 3 m • Vibration system • Tire size: 23.1-26 • Total weight: 14010 kg • German machinery • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typographical errors cannot be ruled out. Ncjdpfxszf I N Io Aiyeu - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2015, Year of manufacture: Mar 2015 Ncedpjypb Hijfx Aiysu 5 stuks gebruikte trailerbanden 385/65 R 22.5 7/8/9 mm.

Condition: used, Year of construction: 1971, brinell hardness 250 kg rockwell hardness 150 kg throat 125 mm checking height 200 mm weight of the machine ca. 0,07 t Nsdpfx Ajy Sih Uoiyocu dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Ncodeyx U Hiopfx Aiyou Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Year of construction: 2022, condition: used, Used equipment Year of manufacture: 2022 Features and technical data: - Allows a single operator to easily load panels onto the platform frame and swing them from a vertical to a horizontal position - Suitable for use with panel saws, vertical panel saws, rack storage, or for panel transport between workstations - Swivel frame with two-position locking mechanism (vertical and horizontal) - Table height can be adjusted to the desired working level via foot-operated hydraulic pump - The design with a smooth scissor-lift mechanism ensures the platform is raised and lowered in a perfectly parallel manner - Sturdy roller supports on the lower rail and multiple all-direction rollers for ergonomic and easy handling - Counterweight on the lower frame provides secure positioning and maximum stability when moving the table - Operator pedal for the workstation table is easily accessible at all times - Easy to maneuver thanks to four swivel castors with a diameter of 125 mm - Two castors equipped with parking brakes - Swivel frame can be mounted and dismounted on the platform base frame quickly and easily - Complies with EN 1570-1 safety standards - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm | Length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg Ncjdoyy Tp Sopfx Aiyju - Swivel frame weight: 10 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg Nsdpsyx Nubsfx Aiyecu The above information is provided subject to change until the machine arrives at our warehouse. Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm control Seicos 40L Multi max. machining diameter 340 mm Bar feed 51 mm Njdpfx Aiezbcy Usyscu turning speed range - spindle 30 ~ 5.000 U/min drive capacity - spindle motor 11 / 7,5 kW spindle nose A2-6 spindle bore 59 mm bearing diameter 100 mm travel -x axis 215 mm travel -z axis 400 mm turret (x-stations) 16 feed 0,001 ~ 500 mm/min rapid traverse X/Z: 30 m/min Shank diameter 25 x 25 mm Drill shank diameter 40 mm taper of center MK 5 tailstock adjustment 300 mm total power requirement 23 kVA weight of the machine ca. 4,6 t dimensions of the machine ca. 5,5 x 2,8 x 2,2 m CNC Lathe HITACHI SEIKI - HiTec-Turn HT 20 RIII

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Ncsdpfjzgua Ajx Aiyou Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: used, Year of construction: 2008, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Ncsdpfxjzcv D Ao Aiysu Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2009, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts Ncodszcv A Eopfx Aiyou - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, SCM Olimpic 500 HT - Automatic edge banding machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control console (control panel) - Human-machine interface (HMI) software "Maestro active edge" - Fine trimming and radius cutter head, radius = 1 mm - Fine trimming and radius cutter head, radius = 2 mm Ncedpszgf Idsfx Aiyeu - Electronic positioning of the upper pressure bar - Spacers on the infeed guide rail - "SAVENERGY" kit - Interior lighting of the machine housing and the edge banding area - "Nesting" contact rollers - "AAR" 1 release agent spray unit - Spray unit for final finishing of the edge - Spray unit for sensitive edges - Joining unit "RT-V1" - "EASY SIZE" device - Gluing unit "VC-VM" - Ceramic lamp with infrared radiation - Electronic positioning of the pressure rollers - Trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius cutter head "RAS-HP Multiedge 2R" - Planing cutter "RC-N" - Buffing unit "SP-V" Machine is new and still in its original packaging. Commissioning possible in Germany and Austria. Currently, a subsidy of 15% is possible in Germany; we will be happy to assist you with this. Special offer machine at a special price.

Condition: used, Year of construction: 2009, Horizon HT-70 Three-Knife Trimmer, used The Horizon HT-70 is a powerful and robust three-knife trimmer that can be operated both inline and offline. It is excellently suited for precise finishing of books and brochures. Key Features: - High productivity with up to 1,000 cutting cycles per hour - Clean and precise cuts without rough edges - User-friendly LCD display for easy operation and status monitoring - Flexible processing of various product sizes - Quick changeover times of less than 10 minutes - Advanced interlocking system for operator protection Technical Details: - Cutting thickness: 2 - 50 mm - Number of knives: 3 - Untrimmed dimensions: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm - Trimmed dimensions: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm - Dimensions (L x W x H): 2260 x 1160 x 1600 mm - Weight: approx. 1530 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Nodpfezcmmujx Aiyecu Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: refurbished (used), Year of construction: 2004, Completely overhauled Haas Multigrind HT grinding machine, available in Q3/2026. Used for re-sharpening of hobbing cutters / beveloid gear cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools, and other workpieces / components. Control system: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (rotary table): 360° SK50 Ncsdpsmk Hhcofx Aiyju C-axis (rotary table): 270° X3-axis: electrically driven with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-position magazine Coolant system: Turbo separator Extraction system: LTA CO2 fire extinguishing system Internal handling with workpiece pallet according to customer requirements Clamping devices according to customer requirements Additional accessories available ex-works Software can be customized according to customer requirements Pre-acceptance at the factory and commissioning, training, and final acceptance at the customer's site Financing / lease-purchase possible Changes possible

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Ncsdpsv T Un Defx Aiysu Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. Ncjdpfx Aswf Aftsiyou 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Year of construction: 2014, condition: good (used), Millipore Flow Cytometer Guava easy Cyte 8 HT, manufactured in 2014. Regularly maintained. Includes PC and software. Ncjdpfx Aijiv S Arjyju Location: Cologne. Due to laboratory closure, various equipment is available; please request a detailed list.

Condition: used, SIEMENS CONNECTION PANEL HT 8 6FC5403-0AA20-0AA0 HT 8 Condition New Nodpfxjy Tbx Uo Aiyjcu

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Nedpfx Aexdb Eysiyecu Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Height: 2150mm Weight: 8900kg

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Ncjdsxhgfmspfx Aiyju Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg