Used Hofmann Good Condition / Year Of Construction 1978 / Holz-Her Feed Unit for sale (92,599)

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ Itedpfx Akjzvdk Aopon 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Iodpfxsx U Dfgs Akpotn Shipping possible at extra cost!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Grinding unit Gluing system Edge pressing unit Edge trimming unit Radius milling unit Rounding unit Itjdpfx Ajz I S Tmokpon Edge scraping unit Glue scraping unit Brush unit

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Iedpev Im Swefx Akpetn Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: used, Second-hand 4-roller feed unit with stand from HOLZ-HER, model ETZ, for feeding workpieces in woodworking. The machine is suitable for continuous feeding in various woodworking applications. Includes new rubber rollers. Isdpfozymtzsx Akpstn Technical data: - Feed speed: 2–30 m/min

Condition: good (used), Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg Isdpjgyg Avofx Akpetn

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Ijdpfezfilwsx Akpetn Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Iedpfszu T Sgox Akpetn Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Iodjykar Hjpfx Akpetn Available around September 2026 Shipping available at extra cost!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,946 h, overall weight: 7,000 kg, type of input current: AC, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total length: 7,150 mm, total width: 2,440 mm, total height: 2,400 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment Itedpfx Aszgvy Dskpsn • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm) In

Condition: used, with new feed rollers used good condition cleaned Itsdpfx Akjz I Uduopsn functionally tested Manufacturer: Holz-Her Type: ET 117 Machine No.: 7901 Motor with pole change, 2 speeds Roller diameter mm: 110 Roller width mm: 50 Number of feed rollers: 3 Speeds m/min: 4, 6, 8, 12, 10, 15, 20, 30 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition, as inspected, without warranty or guarantee.

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW • Dimensions: Iedpfxowm Nfvs Akpstn o Length: 3,600 mm o Width: 2,600 mm o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Condition: good (used), functionality: fully functional, Segura 117 metal bandsaw - Tiltable table - Equipped with Ideal bandsaw blade welding device - Very heavy-duty design - Speed regulation Isdpfx Akeygmztepetn Due to the age of the used machine, warranty is excluded when sold to commercial customers.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop Isdpfx Aozxy Nyekpotn The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Itjdpfx Ajzx Sxgjkpsn Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, used, in good condition overhauled, with 4 new feed rollers Make: Holz-Her Model: ETZ Machine no.: 47884 Pole-changing motor with 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pieces with stand Speeds: 2-30 m/min., 4-speed selectable Space requirement approx. 1200x600x700 mm Weight approx. 60 kg Total connected load: 0.75 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Itedpfxeyvvtfj Akpen Handed over in current condition, as inspected, functionally tested, without warranty or guarantee

Condition: used, Used, good condition, low hours Manufacturer: Holz-Her Model: ETZ117 Machine No.: 6999 Motor: pole-changing, 2 speeds Isdpsyu U Ecofx Akpjtn Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pieces with stand 8 speeds, 4-position switchable Weight approx. 60 kg Location: 97447 Gerolzhofen, loaded free, unpacked Sold as is, as inspected, function tested, no overhaul, no guarantee or warranty.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Isdpfxez I R Sne Akpstn Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit Iodpfsz R A U Isx Akpstn • Gluing unit • Roller magazine for roller edges • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling • Glue application • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Itjdpfxezt Twts Akpsn Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: good (used), Year of construction: 1988, functionality: fully functional, For sale is a robust and reliable Scheer DB5 dowel drilling machine / multiple-hole drilling machine for professional use in carpentry workshops, joineries, and in the furniture and interior design industries. The machine is ideally suited for precise dowel drilling and multiple-hole drilling in solid wood, chipboard, MDF, and other wood-based materials. Thanks to its robust industrial design, pneumatic workpiece clamping, and precise guide systems, fast, accurate, and consistently repeatable work is possible. The Scheer DB5 impresses with its ease of operation, high precision, and durable construction, making it ideal for daily use in the workshop. Technical data: Manufacturer: Scheer Type: DB5 Year of manufacture: 1988 Voltage: 400 V Pneumatic workpiece clamping Itsdpfjzr Egkox Akpen Digital dimension display Adjustable stops with central adjustment Includes drill bit Precise linear guides Operation via foot switch Dust extraction connection available Robust steel construction Undercarriage with rollers Application areas: Dowel drilling Multiple-hole drilling Furniture construction Interior design Window and door construction Carpentry Joinery Series production The machine can be inspected and tested under power after prior appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, Itsdpozt Twyofx Akpsn continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Original New Price: €138,000 + VAT Our Price: €69,000 + VAT (50% savings) Why choose this machine? Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Ijdpfx Akjygrghopetn Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Itjdpfx Asygm Akekpsn Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, Year 2003 Machine is fully controlled by PLC, almost all settings can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, a second set of cutters is available, various indexable inserts are available. Maximum panel thickness approx. 48 mm, edge banding from 0.3 - 15 mm possible. Chain conveyor renewed approx. 10 years ago. Spray system for separating and cleaning agents, controlled by the application. -Jointing fence, motor-driven, program-controlled. -Jointing cutters 1961, 2 x 2.0 kW. -Gluing system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. Itsdsz Dxh Nepfx Akpen -Miter saws 1918, bevel cut adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel). -Profile cutting blade 2 mm 1929, pneumatically timed. -Corner copying unit 1983, carbide tipped, with adjustment on the control panel, functional, but needs further fine-tuning. -Straight cutting blade 1964. -Swivel unit, controlled by the application. Includes all operating manuals, documentation of the operating points digitally and in printed form by Holzher technicians. A set of DIA jointing cutters is also included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, Year 1995 Mounted on the machine with connection to the pressure bridge. Easily adjustable from the front control panel, with a rotating device for parts. Adjusted to the feed rate, sensors still available from HOMAG. -Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. -Sale only to commercial enterprises, machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.