Used Hilma 560 Mm for sale (75,786)

Condition: excellent (used), Extension for HILMA vice Ijdpfx Afsnl Drzeuobc jaw width 160 mm Jaw width extension length of tie rod 560 mm Weight 21,5 kg

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Ibedpfx Ajzr I H Hjfuoc Longitudinal feed range 0.028 – 6.43 mm Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Condition: used, Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle for: workpiece clamping -T groove: 14 mm -T groove spacing: 64 mm -Threaded holes: M12 -three-sided: can be clamped Ibedpfedwc Izjx Afujc -Dimensions: 560/445/H145 mm -Weight: 170 kg/piece

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 80, see photos -Weight: 11 kg Ibodpfx Afjvzniksuoc

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm Isdpfxjvzng Nj Afuebc -Number of teeth: 100, see photos -Weight: 11 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6.5 mm -Inside: Ø: 32 mm Ibedevzmx Depfx Afusc -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 12 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 Iedjh Hbw Eopfx Afuebc -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg

Condition: used, hydraulic vise Manufacturer: Hilma Iedpfx Afodhlqyeujbc Jaw width: 200 mm Jaw height: 65 mm Overall length: 690 mm Overall height: 205 mm Maximum opening width: 440 mm Drive: horizontal and vertical with crank Rotary table: 400 x 370 mm Clamping force: 8 tons.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Ibedpfxjytpy Se Afujc Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: good (used), faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 560 mm Iodpewuck Uofx Afuobc -Bolt circle: Ø 235 mm -Groove width: 27 mm -Through hole: Ø 109 mm -Dimensions: Ø 560 x 290 mm -Weight: 116 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Bolt circle: Ø 170 mm -Through hole: Ø 90 mm -Reference: Short cone 8 (Ø 136-139 mm) -Dimensions: Ø 560 x 200 mm Ijdpfx Afsx R R R Ieujbc -Weight: 77.3 kg

Condition: excellent (used), Vise Manufacturer: Hilma Jaw width: 100 mm Opening width: 170 mm Iedefhvkmepfx Afuobc Height: 90 mm Weight: 17 kg

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm Iodpfx Ajzfafhsfusbc -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m²

Condition: used, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Handover: in its current condition as inspected -Condition: Problem with the lead screw -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm Spindle speeds: 16 - 1600 rpm Ibsdpfeyaypksx Afuoc -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 560 mm -Bolt circle: Ø 235 mm -Groove width: 22 mm Isdenzpygopfx Afuebc -Through hole: Ø 140 mm -Intake: short taper 11 -Weight: 109 kg

Condition: used, functionality: fully functional, Year of construction: 1991, load capacity: 3,200 kg, main lifting speed: 50 mm/min, fine lifting speed: 32 mm/s, throat depth: 18,560 mm, working height: 6,000 mm, DGUV certified until: 09/2025, Equipment: documentation/manual, 3x ABUS single-girder overhead crane ELK 3.2 t – span 18,560 mm – lifting height 6 m Manufacturer / Model: ABUS / ELK (single-girder overhead crane) Year of manufacture: 1985 / 1988 / 1991 Condition: used, operational Location: 79232 March-Hugstetten Price: €7,800 per crane, negotiable, plus VAT Description: ABUS single-girder bridge crane with a span (center-to-center distance) of 18,560 mm ± 10 mm, load capacity 3,200 kg. The crane was used in an indoor hall. It was delivered and commissioned as a new unit in 1988/89. Technical data of the crane Load capacity: 3,200 kg Span: 18,560 mm Classification: DIN 15018 H2/B3, drive group 1Am (DIN 15020) Crane travel: 40 / 10 m/min (2 speeds), 2 travel motors Crane wheel: 4 pieces, Ø 160 mm Max. wheel loads (net): 24.6 / 24.7 kN Total weight including trolley: 3,640 kg Paint: RAL 6011 reseda green Hoist / Trolley Ibsdpfx Aoz Smctefusc ABUS electric chain hoist GM 1032 F6-201.41.062.E Hook travel: 6,000 mm Lifting speed: 5.0 / 0.8 m/min (slow / fast lifting), 3.2 / 0.45 kW Trolley travel: 20 / 5 m/min Wire rope: Ø 7 mm, 1,770 N/mm², minimum breaking force 38.3 kN Trolley weight: 330 kg Electrical system / Safety Operating voltage: 400 V (380 V) / 50 Hz, control voltage 220 V Connected power: 4.3 kW Pendant control with its own, independently movable control unit Overload protection Emergency stop switch Load hook twist protection Disc brakes on all drives, protection class IP 54 Power supply to the trolley via festoon cable Documentation available: overview drawing, data sheet, master data sheets for crane and trolley, wire rope certificate, and the protocol of the initial inspection and acceptance (test load approx. 4 t). Scope of supply: crane bridge with head beams, travel drives, trolley/hoist, control system and festoon cable. Dismantling: by arrangement Inspection possible by appointment.

Condition: good (used), Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos -Dimensions: 560/470/H405 mm Isdpfxoxrkqus Afujbc -Weight: 62 kg

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Pressure blower: Radial fan pressure blower -Type: Ø 420 mm Iodpfxoziz Ave Afuobc -Motor: EMK 2.2 kW / 2915 rpm -Volume flow rate: m³/min -Inlet connection: Ø 150 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 420 x 40 mm -Dimensions: 650/560/H760 mm -Weight: 103 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck Iedpfxodfv Iis Afuobc -Chuck size: Ø 560 mm -long jaws -Cone: Ø 120 mm -Through hole: Ø 110 mm -Hole circle: Ø 170 mm -Weight: 94 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 1 shelf -Width: 560 mm -Depth: 420 mm -Height: 890 mm -Shelves: See photos for layout/height Iodpfx Afsx Hgfgeuebc -Door: lockable, without lock -Weight: 47 kg

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Ibodpfx Asxvc N Djfuec Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) Ibsdpfx Ajxvc Rzefusc System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: Transport trolley, 4 pieces -Load capacity: 5 t per transport chassis -Rollers: Ø 77 x 70 mm -Submission/Price: complete Ibjdoww U Nuopfx Afujc -Steering mechanism: in stock, can be supplied for an additional charge, see ID 35935 -Dimensions each: 655/560/H95 mm -Weight: 59 kg/pc.

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm -Weight: 38 kg Ibodecba T Depfx Afusc

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg Ibjdpfeu Drugsx Afuec