Used Hand-Held Cutting Tool for sale (47,439)

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Guodjuhm E Sspfx Amusb Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Godpfx Amjwvht Reueub Year: 2015

Condition: excellent (used), Diameter: 800mm 3 Chuck: yes Spindle bore:130mm Gedpfx Ajwvrp Aemusub Connector: Camlock 13 Max. speed: 100Rpm Length: 800mm Width: 800mm Height: 400mm Weight: 200kg

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Guedswvq Taepfx Amuob Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: excellent (used), Year of construction: 1999, Clamp width: 175mm Max. opening: 500mm Manuel or hydraulic: manuel Number of matching vices:4 Length: 766mm Width: 170mm Height: 70mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Guodpfx Amjydbwdsueb

Condition: used, This Nozar IQ Power Tools dry cut saw is being auctioned in our industrial auction / machinery auction – a collective auction of construction equipment, building materials, vehicles, site equipment and garden technology, conducted online. Gusdpsy I I Urefx Amueb

Condition: used, Hand Held Threader,Threading machine, Ridgid threading machine, pipe threader, pipe thread cutting machine, used machine Guedpfexfk N Rjx Amusb Manufacturer: Ridgid Type: – Overall dimensions: 700 × 340 × 170 mm Accessories: 1", 1 1/2", 2", 1 1/4", 1/2", 3/4", 2"

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick. Gjdpfxoulc Ixs Amujub

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Working radius approx.: 1650 mm Guodpfsd D U T Hox Amusb

Condition: good (used), PLasma cutting machine ready to work. Gujdpfeqzyp Uox Amueb

Condition: ready for operation (used), Very well-known and reliable Cauhe die-cutting machine, format 1200x1600 mm, year of manufacture 1996, from second owner. Gjdpjxz Ncbsfx Amueub

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: P5110, input voltage: 230 V, sheet thickness steel (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, working length: 3,000 mm, working width: 1,500 mm, For sale is a professional CNC plasma cutting machine from the renowned Italian manufacturer Soitaab Impianti, model Plasma Red. This machine is designed for high precision, robustness, and continuous operation in demanding industrial environments. Technical specifications: • Working area: 3000 x 1500 mm • Construction: Monobloc design with integrated cutting table and rails, eliminating the need for special foundations and simplifying installation. • Guide system: Dual synchronized drive on the X-axis (gantry system) with precision linear guides and ground racks. • Control: Numerical CNC control with color touchscreen; user-friendly operation. Godjy H A Iwjpfx Amujub • Positioning speed: High dynamic motion with superior repeatability accuracy. • Extraction system: Integrated table with automatic sectional opening of the fume and dust extraction flaps (linked to torch position). Key features: • Automatic torch height control (THC): Ensures constant distance between the torch and material during the entire cutting process. • Anti-collision system: Protects the torch head from damage in the event of a collision with cut parts. • Cutting quality: Ideal for ferrous metals, stainless steel, and aluminum, delivering high edge accuracy. • CAD/CAM software: Compatible with professional nesting and cutting optimization software solutions. Cutting capacities: • Mild steel: optimal up to 45 mm (maximum 80 mm) • Stainless steel: optimal up to 38 mm (maximum 75 mm) • Aluminum: optimal up to 38 mm (maximum 50 mm) Condition and notes: The machine has been regularly maintained and is fully operational. It is being sold as part of production capacity upgrades. A detailed equipment list and complete technical documentation are available for inspection.

Condition: used, Plasma cutter CLOOS type CPS 40/80 Gusdpfxodzqcco Amuob Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Guodpfx Amedzqa Hjusb Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 Gsdeb A Rxcepfx Amujub -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Guedpfsyah R Nsx Amueb Weight: 160 kg Very good condition

Condition: used, Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Gsdpfx Aex Rdc Rsmujub Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Daumenloch Druchmesser 20mm Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Thumb Cut 20mm  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece -Dimensions: 465/100/60 mm Guedpjx Hfdzofx Amujb -Weight: 1.1 kg/pc.

Condition: excellent (used), Lista Drawer Cabinet with Milling Cutter Lista Drawer Cabinet Number of Drawers: 13 Extension Type: Full Extension Very high load capacity thanks to precise and stable construction made of high-quality, welded sheet steel Body Color: Reseda Green, RAL 6011 Load Capacity per Drawer: 200 kg External Dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal Circular Saw Blades Cross-toothed & Coupled Disc Cutters Cross-toothed Disc Cutters Angle Semi-Circular Cutters Dovetail Cutters Gujdpfoq Aa I Tex Amueb Semi-Circular Cutters Thread Cutters Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Each dimension of the cutting maschine will only be sold in a set of 2. Gjdpfx Aogzpanomuoub

Condition: new, machine/vehicle number: 001126, Euchner brand hand-held control unit for Höfler machines. Model: HBA-098110 Serial number: 001126 Gedpfx Aerwlvmomusub Completely new, original packaging available. Manufactured in Germany. For further questions or interest please contact us. Shipping can be organized at any time on request.

Condition: used, Year of construction: 2008, machine/vehicle number: 088566, SECOND-HAND CUTTING SAW CURSAL MOD. TRV 2200 - DIAM. 500 - CE RULES Gusdjr Ndalopfx Amujb - RALM infeed motorized rollers mm. 3000x450 - PSR2C rollers table with loader mm. 3000x200 - TSEP outfeed belt with controlled ejectors - S/n 088566 - Year 2008

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 000929, saw blade diameter: 350 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC TYPE TD1200 CA - CE RULES - N.2 motors 2 hp - Blade diam. 350 mm - Min/max working length 220/1200 mm Gsdpsx Rvmbsfx Amuoub - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Complete with manual and CE declaration - With automatic loader - Serial no. 000929 - Year: 2001 - CE rules

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. Gedpou Ul Tzjfx Amujub This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm Gedpjvi Enaefx Amuoub with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB