Used Grob-Werke Cold Rolling Machine for sale (69,163)

Condition: used, Year of construction: 2011, Control Siemens Sinumerik 840D sl centre height 1.150 mm z-axis 1.559 / 307 mm x-axis 16 - 80 mm Ksdpfjzdk Ikox Anwsdn Swing circle diameter 92 mm roll spindle turning speed range 0 - 3.000 U/min Rolling mill roll clearance - axial 0,025 mm feed speeds infinitely variable 0 - 30.000 mm/min rapid traverse 30.000 mm/min Swivel angle range ±3,2 ° Max. speed - main spindle 375 U/min piston stroke 400 mm diameter of piston 90 mm with effective piston area 63,6 cm² In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Kdsdouz If Njpfx Anwjn - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Kjdpjh A S Htjfx Anwsdn Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Kedpewx H R Tofx Anwsdn Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Kdjdpfx Ast Hw D Donwsn Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Kdjdpfofnk Ehsx Anwon Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis Kdsdeyzza Iopfx Anwen special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Ksdpewdywdefx Anwodn Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: used, Year of construction: 2009, Technical details: x-travel: 600 mm y-travel: 770 mm z-travel: 675 mm Kdodpjqy Sr Sefx Anwjn total power requirement: 47 kW weight of the machine ca.: 13 t Tool bore: HSK-A63 numbers of tools in magazin: 40 including additional tool magazine ZM 182 1 spindle , 5 axes *

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 800 mm Travel distance Y :950 mm Travel distance Z: 1020 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Siemens Sinumerik spindle chuck: HSK 100 spindle revolutions: 6000 rpm Speed range to: 6000 U/min table size X: 770 mm table size Y: 770 mm max. workpiece weight: 800 kg tool changer: 60 - time input Power : 32 kW Torque: 340 Nm Rapid traverse: 40 m/min feed rate: 40 mm/min spindle cooling chip conveyor control Siemens 5-axis CNC universal machining center Ksdoyzw Saepfx Anwsdn Designed for high-precision milling of various materials Extremely rigid construction for heavy-duty cutting Equipped with Siemens Sinumerik control HSK100 spindle, ideal for hard metal machining High process reliability and efficiency Suitable for automotive, mechanical engineering and mold making industries

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm weight of the machine ca.: 17 t dimensions of the machine ca.: 6 x 3 x 3,2 m Diameter of the table: 770 mm max. table load: 800 kg tool taper: HSK-A63 max. tool length: 465 mm no. of tools in magazin: 60 spindle turning speed range: 12.000 U/min feed power: 8 kN kp power capacity: 25/35 kW 5 axis Kdedpfxot Rmd Ie Anwen G550-1024 HSK A-63 Grob (Bezeichnung G550-1024) 1 spindle *

Condition: used, Year of construction: 2007, Technical details: Kedpfxewi Nigs Anwsdn weight of the machine ca.: 11,2 t one spindle *

Condition: used, Thread rolling machine UPWS 25. Kodpfx Anjzd Rf Newjdn

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided. Kdsdpfjwwl Saex Anwon

Condition: good (used), Year of construction: 2012, Control Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (x/y/z) Table diameter: 630 x 630 mm Table load: 700 kg Workpiece diameter - max.: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system - Motor spindle: 16,000 rpm Drive power: 25/35 kw Max. Torque: 160/223 Nm Spindle holder: HSK-A63 Tool changer: 120-position Kdedpfx Ajrx N Tzjnwsn - Measuring probe - Kinematics package - Tool length checking device - BLUM laser measuring system Tool monitoring - electric handwheel - Suction - 80 bar IKZ system

Condition: like new (used), Screw Jack GROB RTP 502-000-8 Screw Jack RTP 502-000-8 GROB 40:23 240/01 00000 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: screw jack / lifting gear Item number: 213554 Drawing number: 90010016737 Ksdpfxsyrydle Anwodn Packaging: original wooden crate Condition: unused, original packaging from warehouse clearance

Year of construction: 2015, condition: used, diameter / mm Cutting (quantity) / weight 15000 kg Control Siemens 840D Production line - Modular Special Machine (MSM) with clamping device 1 double spindle machining centre Make: GROB Type: Special machine GM4650 Year: 2015 Control: Siemens, type 840D sl CO2 fire extinguishing system, air filter LTA, oil treatment, make: Ruez, type MBF-1000 AS, year 2015 - Operating hours 43,774, spindle hours 1,598 Kdodsphu D Tepfx Anwen Technical data Machine length: 8400mm Machine width: 2500mm Machine height incl. LIP: 2150mm Machine weight: 15.000kg

Condition: used, Year of construction: 2009, Technical details: Kodpowdyyfsfx Anwodn x-travel: 630 mm y-travel: 630 mm z-travel: 500 mm number of spindle speeds: spindle motor: 32 kW size of pallet: 500 x 500 mm b-axis: 36000 x 0,001 ° no. of workpieces in the magazine: 61 Stück tool taper: HSK 63 weight of the machine ca.: 15 t Single-Spindle Mechanical processing cylinder head VR6 *

Year of construction: 1998, condition: good (used), functionality: fully functional, TECHNICAL DETAILS x-way: 630 mm y-way: 630 mm Kdjdpfsi T Ea Rsx Anwen z-way: 500 mm number of spindle revolutions: 0 - 15000 rpm pallet size: 500 x 500 mm b-axis: 360.000 x 0,001 ° tool holder: HSK 63 tool magazine: 41 MACHINE DETAILS machine weight: approx. 15 t spindle drive: 32 kW

Year of construction: 1966, condition: not inspected (used), Rough SM fine drilling mill, drilling mill -WKG 385- Offered here is fine boring mill of the company Grob. Technical data: Manufacturer: Grob Type: SM Ksdpfxehg Nxxs Anwsdn Year of manufacture: 1966 spindle throat max.: 450mm spindle speed min.: 205 rpm spindle speed max.: 610 rpm number of spindles: 2 pieces table length: 300mm table width: 550mm distance table to spindle: 750mm feed: hydraulic

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance. Kodpfx Aney Ugtajwsdn

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. Kodpfxjzc Rkwj Anwodn 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Kdodszc N Rcopfx Anwjn Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Type RP 18/U Year 2012 Kdsdpfx Aozb Imaenwjn Siemens SIMATIC OP17 CNC control panel Reference: F24

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Kdodozfayfopfx Anwjn Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition