Used Goebel Ecoprint for sale (18)

Condition: used, Year of construction: 1995, Format: 520 mm Nljdpfxozywcts Akieh Equipment: Exchangeable casettes format change system Web offset cassette: 2 x 24 Zoll, 2 x 17 Zoll Fountain water system Technotrans 4 Offset units Roll to Roll

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² Njdpfx Asz Hvmhokielh - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Condition: used, Year of construction: 2017, machine/vehicle number: 19665, CNC cylindrical grinding machine Willi Göbel GRS-II-450, Serial No. 19665/17, Year of manufacture 2017 with Siemens Sinumerik control system Nodpfx Aez Nn Drekielh Further information available via click-through.

Condition: used, empty load weight: 1,860 kg, maximum load weight: 6,140 kg, overall weight: 8,000 kg, axle configuration: 2 axles, first registration: 09/1985, loading space length: 4,500 mm, loading space width: 2,440 mm, loading space height: 500 mm, total length: 6,350 mm, total width: 2,500 mm, total height: 1,800 mm, suspension: steel, tire size: 10R17.5, color: blue, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2 axles, BPW axles, tandem axle, leaf spring suspension. Nledpfei Rm Uyjx Akish ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Njdpjzycraefx Akislh

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Nledpfx Aez Nxxyokieh Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: used, Year of construction: 1989, Format: 520 mm Equipment: Exchangeable casettes format change system Perforation unit for Business forms Nsdpfszywcmjx Akielh Remaliner 3 finishing options: Folded, Sheet and Reel 6 Offset units 6 x 24 Zoll printing unit inserts 2x UV R/V dryer

Condition: used, Year of construction: 1986, Format: 520 mm Nledpezywcgofx Akioh Equipment: Exchangeable casettes format change system Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Zoll printing unit inserts

Condition: good (used), functionality: fully functional, current model HG 36 Thread-cutting capacity in ST 60: M10 - M 36 Drill chuck taper: B24 Motor power: 3 kW Nledpfx Asz Ig Tnekioh 6 speeds: 19 – 95 rpm

Condition: excellent (used), functionality: fully functional, empty load weight: 5,630 kg, maximum load weight: 27,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, total length: 12,610 mm, total width: 2,500 mm, total height: 1,150 mm, color: black, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Göbel / System Trailer Interchangeable Chassis COS27 Rare special equipment! For sale is an exceptionally equipped Göbel 3-axle interchangeable chassis / container chassis in very good condition. The trailers have been used very little and have been well maintained. Due to the extensive special equipment, this is not a standard container chassis, but a technically very interesting and rare configuration. Of particular note is the combination of WABCO OptiLoad and a BPW trailing steering axle with Active Reverse Control. The first axle is designed as a lift axle with WABCO OptiLoad. The system ensures a permanently optimized fifth wheel load and load distribution via automatic air spring relief. The rear BPW steering axle steers in normal driving operation and also provides active support when reversing. The steering can be additionally influenced via the existing remote control. Especially when maneuvering and in confined spaces, this design offers a significant advantage over a conventional container chassis! The chassis is designed for various container configurations and features a twist-lock system and a gooseneck design. Equipment / special features: 3-axle interchangeable chassis / container chassis WABCO OptiLoad on the first axle first axle as a lift axle BPW trailing steering axle BPW Active Reverse Control steers when reversing remote control for the steering system WABCO EBS braking system WABCO SmartBoard / TIM with ECAS operation gooseneck design twist-lock container locking accommodation of various container sizes possible 2 stainless steel toolboxes with high-gloss polished front flap, approx. 1,000 x 500 x 500 mm ALCOA Dura-Bright aluminum rims 11.75 x 22.5 inches tires 385/55 R22.5 with M+S and snowflake symbol DUO-MATIC air connection 15-pole electrical connection complete lighting system in LED design additional reversing lights high-quality KTL coating additional powder coating in RAL 9005 deep black The original new price for this extensive special configuration was over 50,000 € net. The main inspection (HU) will be renewed before delivery. Several interchangeable chassis are available. Two largely identically equipped interchangeable chassis are available in this design. Available designs or container accommodations: 10 ft Nodoz D Umujpfx Akijlh 20 ft 30 ft 40 ft In addition, another interchangeable chassis for a 20-foot container is available. If desired, a suitable design / material container is also available. Further information on the individual chassis, container dimensions and available combinations is available upon request. A viewing is only possible after prior arrangement. Image note: AI-assisted adjustment of background, vegetation and lighting mood. Vehicle unchanged.

Condition: excellent (used), Cutting range: M3-M10 in steel Nlodpfxjz Hk Ruo Akioh M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm Includes 1 new tap chuck Everything works smoothly and well.

Condition: used, functionality: fully functional, working range: 2,320 mm, Slitter rewinder Goebel Nljdpjypua Asfx Akioh web widht - 2320 mm rotary mechanism at the receiving station

Condition: good (used), functionality: fully functional, Used slitter rewinder Goebel Nsdpfx Akeyqx Dnsijlh 2 shafts on unwinder max diameter on unwinder - 650 mm max web widght - 2200 mm

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition Nljdeupbf Dopfx Akieh

Condition: used, Year of construction: 1996, grinding diameter 5 - 255 mm grinding length 400 mm centre height 130 mm grinding length at plunge grinding 50 mm control SINUMERIK 805 grinding spindle speed 25 - 1400 U/min work piece spindle speed 0 - 500 U/min Nljdpstqqtrjfx Akioh feed of grinding spindle slide cross 0 - 5000 mm/min table speeds 0 - 5 m/min grinding wheel diameter 450 mm total power requirement 10 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel

Condition: used, thread dia. 3 - 10 mm Tools speed 120 - 600 U/min table-size 250 x 350 mm throat 250 mm voltage 380 V Nlodpfxolwlk Ao Akijh threading length 80 mm total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m

Condition: good (used), Max. threading performance: metric thread, brass M33, cast iron M16, steel M14, including accessories. Nedpfx Aksibmn Ejiolh

Condition: good (used), Thread cutting machine, Hahn und Goebel HG 12E Spindle speed: 180-900 rpm Njdsd Rkbrspfx Akislh 380V Machine no. 1917/16 M4-M65