Cylindrical Grinding Machine

GOEBEL/MSO FH-200/400 CNC

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Prsdpfohpqqujx Ac Asb Weight: 4,8to

Year of construction: 2002, condition: not inspected (used), Robot Pedsgu U Itopfx Ac Aerb no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Prsdpfxeu Eb Nie Ac Aob Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Prodjuz If Nepfx Ac Aob Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Pjdpfsrb A Tcox Ac Aorb Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Predpfxounwd Te Ac Ajb Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Psdsvyyyxopfx Ac Aorb Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement Prodpoxur E Ssfx Ac Aeb - Transformer - Approx. 150 tool holders

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Predpfx Acevxhfms Asb Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numroto 3D Simulation Software, Numroto 3D Collision Detection Software, Numroto Form Cutter Software, Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Prodjyv Hv Rjpfx Ac Aeb Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow