Used Gildemeister Multispindle for sale (385)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails Pedpfjyaqgyjx Altjpu - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t Psdpfoy I A U Hjx Altepu

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm control Siemens 840D radial face slide travel 320 mm turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m Ppedpey I A Utefx Altju 1 pc. steadyrest 20 - 150 mm 1 pc. steadyrest 50 - 200 mm

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm tailstock taper MT 5 Podpfx Alszgw Tfstopu total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady.

Year of construction: 2003, operating hours: 10,975 h, condition: used, total length: 4,500 mm, total width: 2,500 mm, total height: 2,300 mm, Colour: White Empty weight: 6.500 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: - Operating hours: 10975 - Drive system: CNC - Control system brand: Siemens - Control system type: Sinumerik 840D SL - Power [kW]: 25.0 - Centre height [mm]: 340 - Swing over bed [mm]: 680 - Carriage turning diameter [mm]: 565 - Distance between centres [mm]: 600 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 0 - Max. spindle speed [rpm]: 5000 - Options: Chip conveyor, Three-jaw chuck - X-axis travel [mm]: 260 - Y-axis travel [mm]: 635 Pedozd U A Sspfx Altepu - Transport dimensions: 4500mm x 2500mm x 2300mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm Ppedpfxswwv Ife Altsu max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm Psdpozggahofx Altspu - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Pjdpszgdk Dsfx Altopu Bar loader: IEMCA BOSS

Condition: ready for operation (used), Year of construction: 2008, operating hours: 76,595 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 320 mm, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 7, This 7-axis Gildemeister TWIN 42 was manufactured in 2008. It features a CNC control Siemens 840D Powerline, two 12-station star turrets, and live tooling capabilities. The machine has a tailstock stroke of 230 mm and is equipped with a optional chip conveyor. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 42 horizontal turning machine we have for sale. Contact us for further details. Pedjzhbtxepfx Altspu • CNC Control: Siemens 840D Powerline • C-Axis: 2 • Y-Axis: Upper Slide • Cross Slides: 2 • Turrets: 2 × 12-Station Star Turrets • Live Tooling: 2 • Tailstock Mounted on Counter Spindle Slide • Tailstock Stroke: 230 mm • Tailstock Force: 300 daN • Tailstock Center: MT3 • Overload Clutch for X- and Z-Axes • Chip Conveyor: Bürener, optional not included • Tool Monitoring System: Artis CTM • Workpiece Diameter: Ø 6–65 mm • Maximum Workpiece Length: approx. 300 mm • Maximum Workpiece Weight: 3.5 kg • Bar Feeder Interface, optional not included • Bar Feeder: IRCO SiMag 42 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,375 h, This 7-axis Gildemeister TWIN 42 was manufactured in 2004. It features a Siemens 840D Powerline CNC control, two 12-station star turrets, and live tooling capabilities. The tailstock has a stroke of 230 mm and a force of 300 daN, making it suitable for workpieces with a diameter of Ø 6–65 mm and a maximum length of approximately 300 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 42 machine we have for sale. Contact us for further details. • CNC Control: Siemens 840D Powerline • C-Axis: 2 • Y-Axis: Upper Slide • Cross Slides: 2 • Turrets: 2 × 12-Station Star Turrets • Live Tooling: 2 • Tailstock Mounted on Counter Spindle Slide • Tailstock Stroke: 230 mm • Tailstock Force: 300 daN • Tailstock Center: MT3 • Overload Clutch for X- and Z-Axes • Chip Conveyor: Bürener, optional • Tool Monitoring System: Artis CTM • Workpiece Diameter: Ø 6–65 mm • Maximum Workpiece Length: approx. 300 mm • Maximum Workpiece Weight: 3.5 kg • Bar Feeder Interface • Bar Feeder: IRCO SiMag 42, optional 3 other machines available with following defects: Psdozhblhepfx Altopu • Machine 1: Hydraulic line defective on turret 1 or 2 • Machine 2: DINA module removed, pressure clamp (reports that the collet is not closed) • Machine 3: Main spindle defective with bearing damage, HS clamp defective, LT module missing, DINA module missing

Condition: good (used), Year of construction: 1992, functionality: fully functional, turning length: 450 mm, turning diameter: 290 mm, spindle bore: 66 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 5,000 rpm, turning diameter over bed slide: 600 mm, Control system: EPL Country of origin: Germany Spindle bore: Ø65 mm Pedoy N Tdzopfx Altepu Tool turret: 12 driven tool positions Tool holder: VDI 40 Tool speed: 3000 rpm Weight: approx. 4,700 kg + 600 kg control cabinet Chip conveyor: BMF Bürener Maschinenfabrik Bar feeder: GIOVANNI CUCCHI, type DB 70 Tools available at an extra charge There are a total of 6 machines with bar feeders available (price per machine with feeder). There is 1 machine without a feeder available (€6,500).

Condition: used, Gildemeister CTX600E Heidenhain CNC Pilot 3190 control system Equipped with powered tools. Distance between centers (TDC): 1000 mm Turning diameter above the bed: Ø 680 mm Turning diameter above the carriage: Ø 455 mm X-axis travel: 320 mm Z-axis travel: 1097 mm Turret: 12 positions Powered tools: Yes Tool holder: VDI 50 C-axis: Yes Main spindle power: approx. 30 kW Spindle speed range: 4 – 2800 rpm Spindle bore: Ø 107 mm Ppodjzhgmkspfx Altsu Max. chuck diameter: 500 mm X-axis thrust: 8 kN Z-axis thrust: 15 kN Rapid traverse rate X: 24 m/min Rapid traverse rate Z: 30 m/min Loose headstock Tailstock diameter: 120 mm Tailstock stroke: 120 mm Taper: MK5 (6) Tailstock force: 14 kN Dimensions & weight Weight: approx. 9,000 kg Length: 4300 mm Width without screen: 2000 mm Width with screen: 2450 mm Height: 2200 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The displayed price does not include VAT (VAT can be reclaimed by businesses).

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: Psdpfx Ajvr Eh Ejltspu • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm Pedpfx Aoralkmeltjpu This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Year of construction: 2005, turning diameter 680 mm Ppsdpfx Aezgxfveltou turning length 600-635 mm control Siemens weight of the machine ca. 6500 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Ppedpfx Aljxrg S Istju Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain TNC 530 Axes: 5-axis simultaneous Travel ranges Psdpfezhufhsx Altspu X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from an aerospace institute. Excellent condition. Errors and prior sale excepted.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Podpfx Aexmd Txeltjpu Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2006, GILDEMEISTER NEF 600 CNC lathe Year of manufacture: 2006 Control system: SIEMENS 840D Powerline with ShopTurn Equipment: 3-jaw chuck RÖHM 250 mm 4-jaw chuck RÖHM 250 mm Turret, 8-position hydraulic tailstock Included in the scope of delivery: VDI tool holders, equipped with turning tools and more Operating manual/documentation Psdpfxjzhkrdj Altjpu Technical data, transport & plans – see PDF. All technical data, illustrations and content are non-binding and without guarantee. Subject to change, errors and omissions excepted. All other accessories shown in the pictures and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Carrier, Truck) D-32457 Porta Westfalica packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon completion of purchase.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, spindle bore: 107 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 4 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 3 m/min, Equipment: documentation/manual, rotational speed infinitely variable, The machine is currently still in operation but will be decommissioned due to the operator’s retirement. Available from week 30. Ppodpfx Alozbik Toteu

Condition: good (used), Year of construction: 1999, NEF520 year of manufacture 1999 Ppjdpoy S Eu Rofx Alteu

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Ppodpfx Ajzbqg Nelteu

Condition: used, Year of construction: 1998, swing diameter max. over bed cover 570 mm swing diameter over face slide 420 mm control Heidenhain CNC PILOT longitudinal stroke 635 mm face stroke 220 spindle bore 79 mm centre distance 1000 mm chucking diameter 250 mm tailstock taper MT 4 feed speed longitudal 0,025-24.000 mm/min. feed speed face 0,025-20.000 mm/min. Ppsdpfx Aezcfc Ieltju power feed longitudinal 7.000 N Feed Force Face 3.500 N total power requirement 44 weight of the machine ca. 5,7 t dimensions of the machine ca. 7,5 x 4,0 x 1,7 m Accessories: - 3 clamping jaws - various tool holders

Condition: ready for operation (used), Gildemeister 851.75.00-03.26 circuit board (570 127/137), used, normal signs of wear, 100% functional. Podpsi D U S Refx Altjpu

Condition: ready for operation (used), Gildemeister 852.14.00-01.34 bus adapter, serial number as shown in the photo, used, normal signs of wear, 100% functional. Podpfxei D U Tce Altopu