Used Flexographic Label Printing Machine for sale (67,223)

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit Njdpfjv Tzhqox Aqwjda • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Condition: good (used), Altinisik Makina 1020 Flexographic Printer The machine is fully operational and ready for production. Like-new condition. Ndsdpfx Aozlahvoqwea Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: good (used), Iwasaki LDH 200 label printing machine, machine number 1499, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, working width: 20 cm, in good condition, available immediately. Iwasaki LD 200 label printing machine, machine number 1174, 3 colors, die-cutting unit, various mounting plates, UV dryer, unwinder, slitter-rewinder, in good condition, available immediately, working width: 20 cm. Ndsdpeiphikofx Aqwoa A total of 3 machines are available (2 Iwasaki and 1 Labelmen). Working widths: 20 cm and 18 cm. If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior appointment.

Year of construction: 2000, condition: used, - 5 printing units - 1 flexo coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit - GAP Master - BST POWER SCOPE 3000 "Pro Mark Edition" - video system for print image monitoring Ndedpsy H U Uiofx Aqwsa The scope of delivery also includes a rotary die-cutting unit for the back side; this can be used in place of the flexo coating unit. Full rotary, 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Condition: used, Year of construction: 1988, - Processing - 4 printing units (letterpress) - UV coating - Die-cutting Ndodpfx Aqjzq U U Iowja - Winding

Condition: used, Year of construction: 1997, Technical data: Material width: min. 130 mm, max. 270 mm Material width: max. 244 mm Print repeat length: min. 101.6 mm, max. 254 mm Machine components: Corona treatment 5 × offset printing units Njdpfx Aexpilreqweda 1 × flexo printing unit Flat hot foil stamping unit Flat die-cutting unit

Condition: used, Year of construction: 2005, Line Configuration 1. Unwinding Unit - Serame web unwinder 2. Corona Treatment System - Ferrarini & Benelli corona treatment unit; designed for double-sided treatment, currently only the top side is active 3. Web Suction System - Kelva web suction unit 4. Web Register Infeed Printing Units (Offset) 5. Printing Unit DW 1 – Offset 6. Printing Unit DW 2 – Offset - IST UV dryer 7. Web Turn Device - Web turner Possible Printing Configurations: 2 / 6-color printing Up to 8-color printing possible 8. Printing Unit DW 3 – Offset 9. Printing Unit DW 4 – Offset 10. Printing Unit DW 5 – Offset 11. Printing Unit DW 6 – Offset IST UV dryer 12. Printing Unit DW 7 – Offset 13. Printing Unit DW 8 – Offset UV drying Coating and Drying 14. Flexo Coating Unit IST UV and water-based coating 15. Drying Systems Adnos hot air dryer UV dryer available Inspection and Quality Control 16. BST Web Video Inspection System 17. BST 100% Inspection System – IPQ Check Rewinding 18. Rewinding Unit Serame web rewinder Additional Equipment: - Technotrans temperature control system - Web break sensors - Anti-static system - Central control console with: - Eltromat register control system - Operator monitors for machine control and visualization Ndedpfeyhayrsx Aqwea

Condition: used, Technical data: Printing width: 600 mm Ndedpfx Asxxmz Neqwoa Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors Ndodpfx Aqjx Ngflewoa • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs Nodpfx Aqoziatgjwjda

Condition: used, Year of construction: 2011, Printing Specifications Printing process: Flexographic Number of colors: 8 Maximum material width: 1280 mm Maximum print width: 1200 mm Minimum repeat length: 380 mm Maximum repeat length: 840 mm Maximum machine speed: 300 m/min Equipment Drive system: Fully automatic, gearless Ink pump system: Phonematic with AutoWash Web guiding / Camera system: FIFE Anilox Rollers Quantity: 8 Face length: 1260 mm Engraving length: 1240 mm Outside diameter (OD): 171.88 mm Inside diameter (ID): 149.722 mm Ndodszk Hw Uspfx Aqwsa Printing Sleeves Quantity: 8 Inside diameter (ID): 114.708 mm Face length: 1210 mm

Condition: used, Year of construction: 2001, Number of printing units: 8 Web width: 1,270 mm Print width: 1,200 mm Print repeat: 300 - 1,000 mm Njdpfxsx E Tm Ue Aqwsda Unwinder type: Double Axis Drop Splice Rewinder type: Turret Fully Automatic Splice Drying: Hot air – electric heaters Video camera: BST Euroscope Web guides: Yes Material: Plastic webs Camber doctor blades number: Yes Ink pumps: 8 Type of ink: Solvent based Transmission: Bull gear Length/Side registers: Motorized remote controlled

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” Ndjdpfx Asxlrd Noqwea - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Year of construction: 2011, condition: ready for operation (used), A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible. Ndjdpfxjy Igc Io Aqwea

Condition: used, Year of construction: 1995, machine/vehicle number: 1, 5-Farben Etikettendruck- und Endlosdruckmaschine - 5-Color Label- and Business Form Printing Machine Edelmann Junior Print DR2450Baujahr / Year 1995 - Serial-No. 1.228/8 Size 8 1/3" Druckformat / Printing Size max. 207.5 x 360mm Geschwindigkeit / Speed max. 40.000rev/h Nedpfxsh Axahe Aqweda Papierbreite / Paper width 150-370mm Rollendiameter / Reel diameter 1000mm Diameter Kern / Core 70mm Papiergrammatur / Paper weight 30-160gr7sqm Schnittlänge / Cutting length 423.3 or 211.6mm Rolle zu Bogen / Roll to Sheet Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used EMproject89 MS 1700 TWOCOL, year of manufacture 2020. Machine type: MS 1700 TWOCOL Nodoyz T H Hepfx Aqwoda Serial number: 24/2020 Year of manufacture: 11/2020 Voltage: 220 V Rated power: 1.5 kW Suitable for flexographic printing, carton printing, corrugated board, and packaging. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Ndedpfx Aqezmul Sewea Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Digital label finisher Valloy Duoblade WX I with four cutting heads. Machine used only for demonstration purposes. Main technical information: Media width: 100-350 mm. Number of cutting heads: 4 units. Automatic selection and adjustment of heads according to the cutting file Cutting speed up to 9 m/min. Maximum label size: 350x600 mm. Cutting accuracy: +/-0.2 mm. Automatic web tension control with magnetic powder brake CCD camera for reading registration marks and job numbers Lamination system "Web guide" system Ndjdpfxsxv Adzs Aqwoa Sheeter option

Condition: good (used), Year of construction: 2004, functionality: fully functional, product width (max.): 500 mm, We are offering an EDALE flexographic printing machine with a total of 8 printing units and two die-cutting stations. Nedpfx Aqsxhd A Aowsda

Condition: used, Year of construction: 1997, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm Nedpfx Aqowv D Uwoweda - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders

Condition: used, Year of construction: 2005, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm Ndodpjwv D U Djfx Aqwea - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Nedpfxjvf Inbs Aqwjda Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: reconditioned (used), Year of construction: 2021, Jumbo roll diameter max. 900 mm Material width max. 380 mm Printing width max. 370 mm Rewind diameter max. 900 mm Machine speed 250 m/min Year of manufacture 2021 Nedpfx Aszn H Rioqwsda Low operating hours Consists of: - All machine components are servo-driven - 2 servo-driven Bobst flexo printing units min/max printing repeat 305-610 mm, UV drying, - Machine design complies with CE standards - 1 die-cutting unit, servo-driven - 1 matrix rewinder, diameter max. 600 mm - 1 turning bar - 1 inline slitting unit - 1 set of documentation Accessories: - 4 Anilox cylinders - 10 printing cylinders - 5 die-cutting cylinders

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, NEWFOIL 2000 MKII year 1996 web with 125mm Max. printing area 125x150mm Max. die cutting area 125x150mm Speed 6000 cycles Re-register cell can use 2-foils Nedpfx Aqsyrzzfjwoda unwind rewind

Condition: good (used), Mirus Anleger printing machine, in working order. Ndjdpfjud Awvox Aqwea