Used Fasti Fasti 204-10-2 for sale (90,747)

Condition: used, Year of construction: 1985, Max. bend length: 1020 mm Max. Sheet thickness: 2 mm steel Good condition Weight: 400 kg Nwsdpfjzvw S Tex Akion

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper jaw adjustment via footswitch Nwedpsf Nwmzsfx Akijn Bending rail without dents in top condition Total weight approx. 500 kg

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Nwsdpfjz Icuhsx Akion Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm Nsdsu Rimmepfx Akiswn weight 320 kg good condition

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. round diameter: 1000 mm Nodpfxewb Efzj Akiswn Motor drive via footswitch Good condition

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 Nsdpfx Akoum Ttzoiown year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Nwedsq T Ud Sjpfx Akisn Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz Njdpfx Aez H Ah Sekiewn delivery time: on request terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment Njdpfxoz Ah Apo Akiown - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: used, Year of construction: 2008, overall weight: 190 kg, hopper volume: 7 l, terms of delivery: FCA Pegnitz delivery time: on request Nwodpfx Aksz N Igmsion terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: Nwsdpezgu Tijfx Akisn - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: used, Year of construction: 2004, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz Nwsdpfx Asz Iuapjkijn delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1961, sheet width 1020 mm plate thickness 2 mm Nwedpfxezfax Ij Akien

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: Nwjdpfxey Em Dgs Akion - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm Nsdpsy Ezzyjfx Akiewn roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: used, functionality: fully functional, Year of construction: 1969, machine/vehicle number: 506/10/2,5, control type: CNC control, degree of automation: manual, actuation type: hydraulic, working width: 1,030 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, control voltage: 220 V, Used Fasti guillotine shear, model 506/10/2.5, year of manufacture 1969 Nwjdpfey Hhiajx Akisn

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Nodpfxszb Emdo Akiown Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! Nwsdpfx Akozibtnoijn No private sales. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm Nwedpfxeu Ibzwj Akisn plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! -Drawers extend via telescopic slides -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Nwsds Aa Aivjpfx Akisn Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, VEMAG DP10E, LPG 208, AH 204 | Industrial line for the production and portioning of processed meats (Vacuum filler, Portioning machine, Hanging machine) Manufacturer: VEMAG Maschinenbau GmbH Model / Type: - DP10E (Vacuum filler) - LPG 208 (Portioning machine / Twister) - AH 204 (Hanging machine) Nodpfxozlauij Akiswn Serial number: - DP10E: 1570059 - LPG 208: 2080262 - AH 204: 2040460 Year of manufacture: 2011 Power supply: DP10E Vacuum filler: 400-460 V / 18 A / 3~50/60 Hz / power: 12 kW LPG 208 Portioning machine: 400-460 V / 3~50/60 Hz / power: 6 kW AH 204 Hanging machine: 400-460 V / 3.5 A / 3~50/60 Hz / power: 1.5 kW This professional, automated production line from VEMAG is a top-class technological solution designed for medium and large meat processing plants, butcher shops, and factories that produce processed meats on an industrial scale. The heart of the system is the reliable VEMAG DP10E vacuum filler, which is characterized by its high throughput and gentle handling of the raw material. It ensures precise filling of various consistencies, guaranteeing perfect consistency and eliminating air bubbles in the finished product. The second module – the advanced VEMAG LPG 208 Servo Length longitudinal twister and portioning machine – is responsible for extremely precise division of processed meats to the desired length and consistent weight. This system works seamlessly with natural, collagen, and cellulose casings, achieving high portioning speeds exceeding 2000 pieces per minute. The process is completed by the VEMAG AH 204 hanging machine. It takes the twisted portions of sausages or hot dogs and automatically places them on hooks, creating perfectly even loops ready for direct transport to smoking and cooking chambers. The use of servo drives in this module eliminates vibrations and ensures smooth, trouble-free product flow.

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: Nwodpfx Ajxaa S Dokisn - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm Nwjdpfx Aoywzlpskijn -Weight: 1770 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 10 kg, arm reach: 901 mm, KUKA industrial robots (package of 7 units) Model series: AGILUS-2 Series Type: KR 10 R900-2 (Item no. 001032964) Year of manufacture: 2021 Commissioned: 2022 Quantity: 7 units Technical data: Payload: 10 kg Reach: 901 mm Net weight: 37 kg Repeatability: ±0.03 mm Protection class: IP65 Application areas: Handling, assembly, packaging, machine tending, small-series production Nwedpsxdwygsfx Akisn Scope of delivery (per unit): • KUKA industrial robot KR 10 R900-2 • KUKA control unit KRC4 compact • KUKA SmartPad (operator panel) • Connection cable set Condition: • Used, well-maintained from ongoing production • Fully functional • Immediately available

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder, ideal for processing pallets, cables, plastics, and more. Equipped with a feed conveyor with magnetic drum for nail separation. Also suitable for plastics thanks to the powerful 45 kW motor. Fitted with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 blades on the rotor. Original price was €80,000! Njdpfjw Td S Nsx Akijwn