Used Ersa Soldering Machine / Selective Soldering System for sale (86,374)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Nedpev Ta Hlefx Aiyslc Spray fluxer Dynamic preheating at the bottom Convection heating

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box Nodpfx Aijxzrfleyolc New timing belt, new impeller for drive installed

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Nlsdpjn Htktsfx Aiyjc

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Nodpfxow Dtgro Aiyjlc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Nsdpfjyzxa Eox Aiyslc Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and technical specifications: - Motor 400V-50Hz-3Ph, 1.5 kW - Pneumatic single-head boring machine with 23 spindles - Aluminum fence with 4 stops (2 profiles each right/left, 1500 mm each) - Equipped with quick-change chuck - 2 patented accident-safe pneumatic clamping cylinders - Connection for dust extraction unit according to EU standards Nsdpfsy Si Alex Aiyolc - Aluminum boring beam with spindle spacing of 32 mm - Worktable made of MDF and cast iron - Patented spiral system for fine adjustment of drilling depth - Pneumatic drilling head swiveling with lock at any position between 0° – 90° - Foldable side stops with fine adjustment via mechanical counters with decimal display - Drill height setting via mechanical counters with decimal display - Rear fence, travel up to max. 300 mm - Fixed stops at 37 mm for insertion of concealed hinge drill bits - Complies with EU standards - Max. drilling width: 704 mm - Max. drilling depth: 65 mm - Max. workpiece width: 960 mm - Max. workpiece length: 3000 mm - Max. workpiece thickness: 60 mm Availability: short notice Location: 63934 Röllbach

Year of construction: 2008, condition: used, Labelling Machine / Marking System SRD Stano-/Alone-Line Nledpfxoyfgp Ue Aiyoc Features: * Used labelling machine with integrated marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged Year of manufacture: 2008 Technical Data: Manufacturer: SRD Model: Stano/- Alone-Line Unit: Valentin SPE 106/12 Internal article number: 2026012704 Semi-automatic marking system for image and audio media Refer to the operation manual, wiring diagram, and pneumatic diagram for details Tailor-made solutions for your intralogistics. Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to provide you with a custom quote or assist you with planning or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have successfully completed projects for companies from various industries, such as logistics, pharmaceutical, trades, and electronics. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or additional components such as picking racks or containers.

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding Nsdjyrgu Rspfx Aiyjlc • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Nlodpfx Ajyzc Rujiyec

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Nlodpfsvvlyiox Aiysc Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Nledpfjudz D Usx Aiyjc Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. Nodpozbvqyefx Aiyelc The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm Nledpoud U Sfjfx Aiyjc - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Nlsdpeu H R Iqjfx Aiyjc Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Nljdpfjyw H Rksx Aiyoc Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Nodpjyx Etyjfx Aiyjlc

Year of construction: 2014, condition: ready for operation (used), Working condition unit! Comes with infeed and outfeed conveyor systems and full of alloy. Machine still under operation and to be released in Q3 2026. Njdpfxezcardo Aiyelc Ask for additional details!

Condition: used, Year of manufacture: 2001 In very good condition Njdpfehc T Irsx Aiyjlc Additional images available

Condition: used, High-quality mushroom cultivation facility with various machines for sale due to business closure! Stainless steel conical mixer, 6000 L capacity, including a platform for cleaning or inspecting the contents from above. Protected drive from below, including a complete spare drive unit. Price: €9,999 net Two air conditioning units with control systems: 1. Air conditioning unit for cleanroom technology with 5 filter stages. Price: €2,990 net 2. Air conditioning unit for the cultivation room. Price: €1,990 net Two high-pressure humidification systems, 125 bar, with numerous accessories. Price: €2,990 net/unit. Mobile cooling unit – 25 kW output, in 2 power levels. Price: €1,990 net Nlodpfx Aisy Tlikoyoc Furthermore, various accessories: Blue multi-boxes in various designs, asparagus boxes, plastic boxes 60x40 cm, etc. Various electric chain hoists, e.g., from Demag. Various fans, e.g., with integrated water atomization. Note: The air conditioning units and stainless steel mixer are still in working order and can be demonstrated! The machines are in used condition, without any warranty! Shipping: Collection only! We are happy to provide further information.

Year of construction: 2022, condition: used, Frame is from 2012 and machine fully rebuilt in 2022 by ERSA OEM. 1x fluxing module 1 drop jet flux head 180µm 3x preheating modules bottom IR lamps and top side convection 2x solder modules multi wave (dip modules) one standard size and one XL with electromagnetic solder pump No traceability system installed Nlodpfx Aey Uihtsiysc New conveyors retrofitted with heavy load chain system Ask for the full overview of the rebuild and its condition!

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph Nedpfx Aevgvkajiyslc This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. Mold Configuration and Flexibility Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specific production needs. Upon request, you can also add accessories or make necessary modifications, which we offer at separate quotations. Additionally, our technicians, who manage the disassembly, can reassemble the machine, thereby ensuring continuity and reliability in operations. Manuals and Technical Documentation This blow molding machine comes with complete technical manuals and detailed schematics, which will assist you during installation, maintenance, and daily operations. More specifically, the documentation provides detailed specifications regarding container tolerances and operational schematics of system components. As a result, the design optimizes critical values like bottle spacing and the distance between extruders and the container body. Production and Performance This Used Blow Molding Machine supports production capacities ranging from 2400 to 2700 bottles per hour, depending on operating conditions and container types. Therefore, it allows you to maintain a steady output rate. In terms of precision, the mold-carriage stroke extends to 660 mm, allowing well-calibrated movements that ensure production uniformity. Consequently, the machine can produce bottles up to 290 mm wide and 690 mm tall. Conclusions of the HDPE Blow Molding Machine TECHNE SYSTEM The Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph, available from mid-October, provides a versatile and highly efficient solution for companies that require a high production capacity. Additionally, you can customize the system by adding accessories upon request. As a result, the flexibility in mold configuration allows you to adapt the machine to a wide range of production demands. Lastly, the machine ensures operational efficiency due to its reliability, and the availability of technical support for both assembly and disassembly further enhances its performance.

Condition: good (used), functionality: fully functional, Year of construction: 2020, Machine is in good working condition. Nsdpfx Aiey Dfpfeyolc

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) Nsdpfed N Hguex Aiyolc labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: good (used), Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill Nljdpoyuu H Hsfx Aiyec -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 Nodpfx Aiey I Nr Esyolc with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.