Used Elan Sep 03.0.2.1.22 for sale (895)

Year of construction: 1994, condition: good (used), Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Elan, two-hand control panel with counter -Type: SEP 03.0.2.1.22 -Connector: 10-pin Gedpeyzfkdsfx Ai Nouc -Dimensions: 460/440/H140 mm -Weight: 6.4 kg

Condition: good (used), Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch Gjdpfx Aisd N E Nno Nsuc -Dimensions: 455/400/H880 mm -Weight: 23 kg

Condition: used, Control and regulation combination, control device Gjdjct H Tvepfx Ai Nsuc -Manufacturer: ELAN -Type: P250 -Dimensions: 300/220/H80 mm -Weight: 1.7 kg

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Gusdpfjzab Ibjx Ai Noc Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 1985, machine/vehicle number: 751, dimensions of the machine ca.:2,6 x 1,0 x 2,2 m pressure:40 t sheet width:150 mm stroke:8 - 70 mm number of strokes - stepless:60 - 300 min-1 ram surface:340 x 320 mm ram adjustment:70 mm table-size:550 x 580 mm Working width max.:210 mm column travel -side:250 mm hole in the table:400 x 90 mm clamping plate thickness:60 mm Guedpfx Aijcxxnme Noc boring of tool-holders:Ø 40 x 80 mm groove width:30 mm flute depth:6 mm distance between columns:560 mm weight of the machine ca.:3,8 t total power requirement:7,5 kW

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm Guodpfx Aiocxxpcs Njc feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Gjdpfeu Nfmajx Ai Nsuc Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s Guedevuk Szjpfx Ai Noc working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm speed down 380 mm/s Gsdpfxevuk E Io Ai Neuc speed up 185 mm/s working speed 28 mm/s oil volume 450 l power requirement 15,0 kW weight 9,5 t dimensions (WxDxH) 2,3 x 1,9 x 3,6 m SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: ready for operation (used), functionality: fully functional, pressing force: 63 t, stroke length: 80 mm, table length: 700 mm, table width: 640 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the timeframe of 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Stroke: 8 - 80 mm Flywheel diameter: 830 mm Pressure: 63 t Speed: 60 - 300 rpm Table dimensions: 700 x 640 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,200 mm Guedpfx Aoy D Nvpei Noc MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 2,700 mm Machine weight: 7,000 kg External Reference: 52

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: B42523, Operating principle: The separator separates injection-molded plastic parts from the sprues by means of a rotating screw/roller, based on the different component sizes. Condition: Like new! Guodpfxozau Uho Ai Nsc

Condition: used, Year of construction: 2005, Overview  This linear labeling machine was manufactured in 2005 by Mecatronic. The machine is designed for applying self‑adhesive labels on bottles. Technical data Formats: 3/8 L and 3/4 L up to 1.5 L Application: Bottle labelling Configuration: Linear machine, 4 labeling heads Labeling system: Self-adhesive Guodpjyq Iu Ajfx Ai Noc

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator Guedpfexz Avnex Ai Nec -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Gedpfx Aeyidnyji Neuc Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min total power requirement 5,5 kW Gujdpfx Aiovu E Iwo Njc

Year of construction: 2018, condition: used, Manufacturer: SepartechModel: URS05Year: 2018Type: Vibrating screenNumber of screening stages: 228 screens available (see photos)Power: 1.85 kWScreen diameter: Ø 120 cm Godpfx Aiszbnbke Neuc

Year of construction: 2018, condition: used, Manufacturer : Separtech Model : URS02 Guodpfszbnbdox Ai Njc Year: 2018 Type: Vibrating sieve Power : 0,25 kW Screen diameter: 600 mm Possible separation levels: 4 Number of screens available: 30 units Cleaning system included: yes, 2 options. 1 set of grid + balls for unclogging 1 rotating air jet nozzle (installed in the photo) Dimensions: 130 x 80 x 176 cm

Condition: good (used), Sepro robot Type: SR 4030 S3 Year: 08-2006 Gsdpenxkdnjfx Ai Njuc

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: Godpfx Aiozap Sbe Neuc 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, CO2 Supercritical Fluid Extraction Volume: 200 ml Operating Pressure: 300 bar Gujdpfx Aswpvvtoi Nsc Volume (cc): 200 Operating Pressure (bar): 300 Temperature (°C): 20 to 80 Solvent Flow Rate: 3 kg/h Dimensions (mm): 1850 x 830 x 1850

Condition: like new (used), functionality: fully functional, Year of construction: 2026, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 24th – 26th June 2026. For more information go online. Gsdpfjzb E N Sex Ai Neuc

Year of construction: 2015, condition: excellent (used), SPX Separator SE161HBIV for use in the Brewery Industry Gusdpoymyhtefx Ai Noc Device has minimal hours worked. In very good condition. Can be viewed on location in Cork, IE

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M06L/9056, Offer Number: M06L/9056 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-70A Constr. year: 2001 diameter range: 5 mm Godpoxcx Dkjfx Ai Njuc shaft length under head: 70 mm max. cut-off length: 88 mm output pieces/min: 500 Location: In our warehouse

Year of construction: 2010, condition: used, Suitable for dressing and profiling diamond and CBN grinding wheels using silicon carbide wheels (individually or in a package). Accessories: Total enclosure, Camera system, image field 20 x 16 mm Extraction system 4000/3 D 240 3kW 630 m³/h Swivel unit for package dressing Software for converting DXF files to CNC files on PC Touchscreen Standard software for straight, bevel or radii etc. DXF files. Single Diamond- / CBN grinding wheel diameter: 400 mm Single-disc width: 30 mm Packages: packages to Ø 150 mm and width 150 mm Swivel axis: swivel plate for swivel angle: +/- 95 degrees Delivery axis travel: 82 mm Oscillation hub : 83 mm Spindle mounting diameter: 60 mm DIA/CBN wheel flange hole: 32 mm Speed of silicon wafer: 700 - 2800 rpm Gedpjy Tl Iasfx Ai Njuc SIC Grinding Spindle: 60 mm Ø Workpiece clamping X-axis travel: 185 mm Y-axis travel: 194 mm Workpiece spindle head holder diameter : 100 mm with belt spindle diameter : 100 x 200 mm Grinding wheel balance: max. 40 kg Workpiece spindle speed: 500 - 1500 rpm SIC discs up to max.: 200 x 20 mm x 32 mm Connected load: approx. 2.5 kW (400 Volts / 50 Hz) Dimensions W x D x H: 2000 x 2000 x 2600 mm weight: 1200 kg colour: red RAL 3003 / grey RAL 7035

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm Gedpfx Aioyl Uh Se Nsuc DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg