Used Demag Screw Assembly (Plasticizing Unit) for sale (40,066)

Condition: like new (used), screw diameter: 82 mm, Screw assembly (plasticizing unit) in 82mm Crjdjw A R H Tepfx Aaxod Suitable for: DEMAG D430-2350 NC II + NC III machines DEMAG D400-2800 NC III DEMAG D500-2800 NC III Shot weight: 1390g = 1560ccm (D430-2350 NC II & NC III) Shot weight: 1490g = 1670ccm (D400/D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old cylinder. The screw and barrel are as new (dimensions are OK) Complete with RSP.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI Crsdpfxek Sgwaj Aaxjd 6 x gate valve Ai Ziva-G 1.4581

Year of construction: 2014, condition: used, Year of manufacture: Mar 2014 New: No Serial number: 1086683 Cjdpsv Rn N Aefx Aaxord complete tank for fridge unit taken from a schmitz cargobull good condition

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle Credpefnqapofx Aaxsd for ENGEL injection unit size ES3550

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Credpfx Aouzn Nneaxsd Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Crodpfx Aeyxy S Dsaxod Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Condition: used, Acrison dosing screw, dosing unit, feeder Feeder constructed entirely from stainless steel Crodoy Iciwepfx Aaxsd Equipped with mixing mechanism Screw diameter: 80mm Motor power: 0.75kW See our other listings

Condition: reconditioned (used), complete plasticizing unit for DEMAG 2,300 machine, with an 80 mm screw and barrel. Crsdpfx Aaofwcttoxod

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder Crsdpsyfm Epsfx Aaxsd As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Cedpfx Asyvwbwjaxjrd Stahl chain hoists: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: excellent (used), 1. DEMAG gearboxes / crane gearboxes – 10 units. Type: AFM 06 – 1 unit Credpfx Aeyu Sbueaxed Type: AFM 05 – 1 unit Type: AFM 04 – 1 unit (3 units available). Type: AFM 04 – 1 unit Type: ADE 50 DD – 1 unit Type: Bevel gearbox AFW 08 – 1 unit Type: WUK 60 TD – 1 unit Type: P 208 – 1 unit

Condition: used, Dosing unit, dosing screw, dosing hopper Equipped with movable bottom to prevent bridging Including control cabinet Screw diameter approx. 30 mm Credox Nzvfepfx Aaxed See our other advertisements VMA Wekerom

Condition: good (used), Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger Csdpfx Aasb A Sygjxjrd -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 Crsdpfsibichjx Aaxed - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Crjdpfx Aeihiiisaxod Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, SAB163BF Screw Unit Amonia with HELMKE 90KW motor/2985/3550rpm frequency driven Codpfjxawpyjx Aaxsrd with oil separator OHU6022D Total refurbished in 03/2020 Running hours since refurbishment: 17724h Cap.= 289 KW at -30C°/+40C° Swept Volume= 1404/1689m3/h with Siemens Control and Danfoss frequency converter

Year of construction: 1996, condition: excellent (used), Grasso Screw Unit Amonia with 55 KW motor/3000rpm with oil cooler and control panel Cap.= 152,3 KW at -9C°/+35C° Flow rate= 321m3/h Compressor: ER-E36S-28 Cedpfx Aajip Uh Tjxsrd

Year of construction: 2009, condition: excellent (used), Grasso Screw Unit Amonia with 250 KW motor,VSD start/6000rpm Compressor: SAB 159 M - renewed 2022 with oil cooler watercooled and control panel Crodpfxopvizze Aaxed Cap.= 432,7KW at -16C°/+35C° Maintanance through JCI

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 Cjdpfx Aaex I Izroxerd - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h - Operating pressure 10 bar Crsdpfx Aaswrcq Njxjd - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: excellent (used), functionality: fully functional, 3 units complete DEMAG single-girder trolleys with hoist DH316 H12 Load capacity 6.3 t Rope reeving 4/1 Hoist motor KBH140 B2/12 Main lift 6.3 m/min Fine lift 1.0 m/min Hoist gearbox i=85 Trolley: Travel motor KBF80 A8/2 / Gearbox AF04 i=14.1 With DEMAG DST pendant control and main crane connection box Price is per unit; when purchasing 3 units, €3,900.00 each Good condition Crodpfx Asv Uvn Isaxed Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Condition: good (used), 12 plastic silos From Motan dryer Capacity from 150 to 300 L With heating Price starting from 500 EUR per unit Discount available for multiple silos! Codpfxswydqme Aaxerd

Condition: excellent (used), Plastic silos From Colortronic dryer Volume: 400 and 200 L Cjdewydrqjpfx Aaxjrd Price: 500 EUR per unit Price for 3 units: 1,200 EUR!!!

Condition: used, functionality: fully functional, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” Available quantity: > 10 units Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Crjdpfx Aaszggx Dexjd Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % without condensation You can also find the corresponding screw control unit with us!

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 Cjdpsh Nv Itsfx Aaxjrd - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht