Used Dega Dg304 7.5Kw for sale (247)

Condition: good (used), GRANULATOR DEGA Nwodpfxoru H Hzs Akion MODEL : DG304 MAIN MOTOR : 7.5KW ROTOR LENGTH : 400MM ROTOR DIAMETER : 305MM

Condition: good (used), GRANULATOR DEGA MODEL : DG304 MAIN MOTOR : 7.5KW ROTOR LENGTH : 400MM Nwodpfxsru H H Eo Akien ROTOR DIAMETER : 305MM

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs Nwjdpfx Ajyug Hxskijn • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Year of construction: 2020, condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer type GDM -Dosing system: GDM650-2 -Tank: 1010/770/H600 mm Njdpoyl Tuqsfx Akijwn -Individual components: see photos -Quantity: 1 device available -Dimensions: 1170/800/H2780 mm -Weight: 521 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Max Turning Length: 1285 mm Center Height: Nodpswv Sx Rjfx Akiswn • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, For sale: professional submersible pump from renowned brand WILO – model EMU KS70ZH. The unit is in new, unused condition. ⚙️ Technical specifications: Manufacturer: WILO (Germany) Model: EMU KS70ZH Motor type: F17.1-2/15 Power: 7.50 kW Power supply: 3~ 400 V Rotational speed: 2860 rpm Rated current: 15.6 A Protection class: IP68 Max. liquid temperature: 40°C Weight: approx. 75 kg Cable length: approx. 12.5 m Year of manufacture: 2025 ✅ Condition: Nwjdpfoz Smqqsx Akion NEW – unused Stored condition – possible minor signs of transport/storage 📦 Included: WILO pump Power cable Industrial (CEE) plug 🔧 Applications: Dewatering of excavations and construction sites Industry and water installations Sewage / wastewater Pumping stations 🚚 Delivery: Shipping or personal collection possible I assist with organizing transport

Condition: good (used), Year of construction: 2001, functionality: fully functional, conveyor belt length: 3,900 mm, conveyor belt width: 900 mm, Length 390 cm Nwsdpfxoylxmrs Akien Width 90 cm Height adjustable 2 units available The price is 1,250 EUR per unit!

Condition: used, functionality: fully functional, GGE Minisilos 7.5kw dust extraction unit Power: 7.5 kW Filter bag cleaning system 36 filter bags Nedpfoz Ahw Tjx Akiown Filter bag diameter: 160 mm Filter bag length: 2000 mm Dust collection hopper with a capacity of 4.84 m³ Air recirculation to the hall is possible.

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. It come complete with an MTA air dryer. Nedpfxszluihs Akiown

Condition: new, For sale: professional electric motor from the renowned German company VEM motors GmbH Model KTTR 132 SX2 The motor is new, stored in a warehouse, and has never been used. Very good condition, with possible minor signs of storage. Njdpfoz Slv Eox Akijwn Technical data: Power: 7.5 kW Speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Current: 14.5/8.4 A cos φ: 0.86 Protection rating: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Made in Germany Applications: – Industrial machinery – Pumps – Fans – Production lines – Automation A solid and reliable motor, ideal for operation in demanding industrial conditions.

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. Nedpfxe Af Iu To Akiewn No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: new, The engine is new, unused, and comes from stock. In very good condition, ready for operation. Technical data Manufacturer: EMK Model: KAE2A132M 4B3E2K Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 400 / 690 V Frequency: 50 Hz Efficiency class: IE2 Nwedpfx Ajz Slvrokisn Protection rating: IP55 Duty type: S1 Insulation class: F Design: IM B3 Weight: approximately 54 kg

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 with 5 Spindles. (Year 2015) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure TECHNICAL PARAMETERS planing width 20 - 230 mm planing height 10 - 160 mm 1 spindle 18,5kW + Outboard bearing 2 spindle 11 kW 3 spindle 11 kW 4 spindle 18,5 kW + Outboard bearing 5 spindle 30 kW (Possible to use for splitting) spindle speed 6000 rpm feed speed electronically variable incl. brake 6 - 100 m/min 6 upper steel pulling rollers 2 rubber upper pulling rollers Automatic central table lubrication Machine dimensions 3300 x 2150 x 1750 mm No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer Nedpfx Akj Aga Rljiewn No 5 . 30kw - Bottom 6000rpm 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed.

Condition: excellent (used), For sale: Electric motor from German manufacturer Dietz Motoren GmbH Condition: Used, in good technical condition Motor is fully functional Visible storage marks and rust present on the housing and flange Visual condition as shown in the photos Technical data Manufacturer: Dietz Motoren GmbH Model: FDR 132SB 2Q Power: 7.5 kW Speed: 2920 rpm Supply voltage: 380 V Current: 15.5 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty cycle: S1 Approximate dimensions Flange diameter: approx. 300 mm Njdpjz Slwijfx Akiswn Shaft diameter: approx. 38 mm Ideal for pumps, fans, industrial machinery, and drives

Year of construction: 2023, condition: excellent (used), Lowara 66SV02 Vertical multistage centrifugal pump 2023, unused in box, vertical multistage centrifugal pump, 7.5Kw motor, 2900 1/min, 3Ph Nwodpfx Ako Ad Rirsisn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Specification: Working Length: 3250mm Nwjdpe Aazrcefx Akien Working Width: 1050mm Working Height: 100mm 18 Vertical Drills 4 Horizontal Drills X 2 Horizontal Drills Y Grooving saw X-y 90 degrees 7.5Kw Main Routing Spindle 4 Position Rear Tool Changer CE 400V 50Hz

Condition: used, Year of construction: 2023, functionality: fully functional, operating hours: 1,031 h, workpiece length (max.): 2,500 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 700 mm, number of slots in tool magazine: 18, Equipment: documentation/manual, 5-AXIS MILLING PLOTTER 2531 Specifications: 2500 X 3100MM, Z-AXIS RANGE 700MM HITECO 13.5KW S6 TILTING/ROTARY HEAD SET A-AXIS RANGE: +/–120°, C-AXIS RANGE: +/–320°, ROTARY TILT T-JQX 29L0549395D ELETM QX-2 11/12 24 63F NC HSK63 FOR 5-AXIS MACHINES AIR CONDITIONING FOR THE CONTROL CABINET ACTIVE COOLING SYSTEM – CHILLER CW-6000 (FOR SPINDLES UP TO 20KW) LINEAR TOOL MAGAZINE, 18 POSITIONS, FOR 5-AXIS MACHINES ROTARY TOOL MAGAZINE, 16 POSITIONS, HSK63F AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM (FOR 5-AXIS MACHINES OR MACHINES WITH A TILTING ELECTRO-SPINDLE) WALTER SKTG 5.5 P COMBO SCREW COMPRESSOR WITH DEW POINT DRYER REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) BUSCH MV 0312B-5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) 2131 EXPERT MILLING PLOTTER, WORKING AREA 2100X3100MM Specifications: WORKING AREA 2100X3100MM - Z-AXIS TRAVEL RANGE 300MM, EXPERT, PRO - OMRON SERVO AC HIGH-SPEED DRIVES (COMPLETE WITH PLANETARY GEARBOXES) 1.5KW ETHERCAT Nwedpfx Ajz Suyrokijn - 2131 RASTER VACUUM TABLE - POROUS SUPPORT PLATE (1200 X 2500 X 12 MM) - PNEUMATICALLY CONTROLLED VACUUM SECTION, 6 PCS - CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) - BUSCH MV 0312B -5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) - INDUSTRIAL REAL-TIME CONTROL SYSTEM (MS) OSAI OPENSMART, CYCLE TIME BELOW 2MS, UP TO 16 AXES SUPPORT, ETHERCAT COMMUNICATION WITH A SMALL CONTROL CABINET - HITECO 7.5KW S6-ATC ELECTRO-SPINDLE SET, UP TO 24,000 RPM, FAN-COOLED, TOOL MOUNTING - LINEAR TOOL MAGAZINE, 6 POSITIONS - ACTIVE OSCILLATING KNIFE – PNEUMATIC - OPTION FOR OSCILLATING KNIFE: CREASING HEAD - OPTION FOR OSCILLATING KNIFE: DISC KNIFE (INSTEAD OF THE WRITING HEAD) - PNEUMATICALLY MOVED EXTRACTION FOOT (WITH OUTLET FOR CONNECTING AN EXTRACTION SYSTEM/VACUUM CLEANER) - PREMIUM COOLING MIST, 1 PCS - BASE POSITIONING CONTROL - POSITIONING BASE 25MM, 1 PCS (MINIMUM 3 PCS) - OSAI LASER FOR POSITIONING - AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE - CAD/CAM VECTRIC CUT 2D PRO - SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM - HSK-F63 STARTER KIT (5 HSK-F63 TAPER HOLDERS + 18 ER32 COLLETS IN THE RANGE OF 3-20MM) ELECTRIC CHAMBER OVEN FOR HEAT TREATMENT, SwissTherm PKK-7500 Specifications: Chamber Dimensions: 2500x1000x3300 Maximum Temperature: 180 Voltage: 3/N/PE AC 400/230 V, 60 kW, 100A Peel3 Scanner Software: DPS Software, SolidCam 3D, Solidworks Professional, DraftSight Enterprise Schmalz Conveyor Jumbo Ergo 65kg vacuum manipulator system with a lightweight aluminum boom for ergonomic operation HP A3500 ZBOOK FURY 16 G10 Mobile Workstation, 1TB, 132GB, NVIDIA RTX

Condition: used, functionality: unexamined, Ferwood Code: RU0005350 - Manufacturer Code: H6392H0306 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC BIESSE - If interested, we offer a refurbishment service; please contact us. Nedpjzmib Iofx Akijwn

Year of construction: 2025, operating hours: 140 h, condition: like new (used), functionality: fully functional, machine/vehicle number: X-1500, Equipment: CE marking, Only 12 months old – like new , only 140 working hours. Immediate availability. Full documentation + CE. Can be demonstrated producing corners. Unique capability: up to 130×130 mm. Perfect condition – ready for production. Manufacturer: SIA Model: Edge Protector 130x130, Slitter 1500x1500, SCC Base 7 Year of Manufacture: 2025 Working Hours: 140 hours Technical Condition: Like new State: In production Edge Protector Specifications: - Size: Minimum 35x35mm, Maximum 130x130mm - Wall Thickness: Minimum 1.5mm, Maximum 8mm (10mm optional, depending on paper thickness) - Maximum Reels: 12 + 1 craft - Speed: 50m/min (60m/min optional, available on data regulation) - Glue heating - 7,5kw. Nwodpfxez I S Ids Akion Slitter Rewinder Specifications: - Reel Size: Maximum 1500x1500mm, Minimum Width 500mm - Minimum Cutting Width: 35mm - Number of Knives: 15 - Speed: Maximum 250m/min - Electrical Power: 11kW SCC Air Compressor Specifications: - Base: SCC Base 7 VSD TD - Electrical Power: 7.5kW - Air Volume: 0.92m³/min - Tank Volume: 500 liters Dimensions: EDGE PROTECTOR ; SLITTER : Length: 26000 mm; 3000MM - Width: 3000 mm ; 2300MM - Height: 2500 mm ; 1300MM - Weight: 6000 kg ; 3500KG Keywords: corner production line, cardboard corner machine, edge protector machine, packaging corner line, cardboard profile machine, V profile machine, 130×130 mm corner, automatic corner cutting, high‑speed corner line, packaging machinery, cardboard converting machine, protective corner production, industrial packaging equipment.

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Nedpfx Aoycft Tjkijwn

Condition: good (used), Year of construction: 2000, functionality: fully functional, Bandsaw machine Behringer HBM 430A Year of manufacture: 2000 Nedez E Nniopfx Akiswn Includes roller conveyor, 2100mm The bandsaw machine is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range, round: 430mm Cutting range, flat: 430 x 430mm Drive power: 7.5KW Cutting speed: 17 - 120 m/min. Machine dimensions (L x W x H): 460 x 360 x 220cm Weight: approx. 3400kg

Condition: good (used), Grundfos NB65-125/137 Centrifugal volute pump Nwjdpfs Ad Rbzex Akien Single stage centrifugal volute pump, 7.5Kw, 2910 RMP, 1916 Ltr/min, 3Ph

Condition: used, APV Puma 239 Centrifugal pump Nwjdps Ad N T Nefx Akisn Stainless, hygienic centrifugal pump, designed for non viscous liquids, inlet 50mm, outlet 75mm, 7.5Kw motor, 3Ph

Condition: excellent (used), Hilge F&B Hygia IIK Centrifugal pump Single stage end suction hygienic centrifugal pump, designed for sterile and sanitary process applications, flow rate 60 m3h, 2900 min -1, with brand new ABB 7.5Kw motor, 95mm inlet and outlet, 3Ph Nedpe Ad Rcfsfx Akiown

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, total height: 2,075 mm, total width: 2,140 mm, total length: 3,250 mm, table length: 800 mm, overall weight: 2,450 kg, distance table to spindle center: 495 mm, Equipment: documentation/manual, ABENE milling machine, type VHF-320BS, in new condition, previously used in an educational institution. Specifications: - Year of manufacture: 2016 - Table dimensions: 800x400mm - X-axis travel: 600mm - Y-axis travel: 500mm - Z-axis travel: 450mm - Distance table-spindle: 45-495mm - 3-axis variable feed - Drilling spindle travel: 75mm - ISO 40 tool holder - Milling head, rotatable 140 degrees - Spindle speed: 55-3000 rpm, variable in 2 steps - Motor power: 7.5kW - Machine dimensions: 3250x2140x2075mm - Machine weight: 2450kg Machine equipped with: - SONY (Magnescale) digital readout on 3 axes - Variable spindle speed (digital display) Nwedezt Ibtopfx Akien - Variable feed, 3 axes (digital display) - Cooling system - Drilling spindle - Tool changer - Machine manual - Compliant with occupational safety regulations