Used Cross Wrap Oy Ltd Bo 4000 for sale (13,910)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Nwedpfezp H R Eox Agxoi Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), REF: MM5767 Nsdpfxsulc Sqj Agxewi 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Nwodpfjvw I Nijx Agxji Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Nwsdpfszma Tbjx Agxoi Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Nedszma Skopfx Agxjwi

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Njdpfx Ageyl Ubfjxewi Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 Nwodpfowgittex Agxoi semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,300 mm, total width: 1,830 mm, total height: 2,735 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 35.5 kW (48.27 HP), pressure: 4 bar, temperature: 110 °C, Universal machine for heat treatment of all kind of meat products and fish. Heating can be realized by electricity, vapor or gas. Air circulation system provides processes steadiness and operates with two speeds 1450/2850 min-. Smoking generator can be installed to the left or to the right. Valve pneumatic control. Chamber is controlled by ADITEC. Nodswp I Axjpfx Agxowi Control unit measures and control chamber and sausage temperature, humidity, delta t, processing time. 100 programs can be saved by 10 steps. Following sensors are used: Pt 100. Software for visual control is offered as an option. Chamber is equipped with a system for automatic washing. Each module is equipped with its own heating and circulation which ensure processes steadiness and processing time reduction.

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine BOLDRINI - RIBO 20HY/4000 BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Width:2200mm Height:3300mm Weight:13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Njdozil H Ejpfx Agxewi

Condition: excellent (used), mileage: 53,788 km, power: 132 kW (179.47 HP), first registration: 01/2019, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, operating hours: 2,689 h, Equipment: AdBlue, crane, = Additional options and accessories = - PTO = Additional information = Weights Unladen weight: 7,285 kg Payload: 205 kg Gross Vehicle Weight (GVW): 7,490 kg Functional Mast: Telescopic Mast length: 37 m Lifting capacity: 4,000 kg Body make: BOCKER AK37/400 MOUNTING CRANE/ROOFERS CRANE/ROOFCRANE/KRAAN/GRUA CE certification: yes Condition Technical condition: very good Visual condition: very good MANN TGL 7.190 4X2 BB + BÖCKER AK37.4000 CRANE + JIB EURO 6 190HP DRIVE 4X2 BB HIGH ROOF WHEELBASE 390CM ONLY 53,788 KM!!! MANUAL TOOL LOCKERS BÖCKER AK37.4000 CRANE 4 X OUTRIGGER SUPPORT RADIO REMOTE CONTROL MAX. WORKING HEIGHT 37 METERS MAX. LIFTING CAPACITY 4000KG CE CERTIFICATE GERMAN REGISTRATION FOLLOW US NOW ALSO ON INSTAGRAM: GEURTSTRUCKS Nwsdpfx Asyit Rtsgxji WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: as good as new (ex-display), functionality: fully functional, FRONIUS TPS 4000 ROBOT SET .) Fronius power source (Tps4000) .) Fronius cooling unit (Fk 4000) .) Fronius wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE (Optionally available: Profibus + €800 or Devicenet + €1400, others upon request) Manufacturer's list price: approx. €14,000 net We have €5,990 net - VAT deductible - invoice from the dealer. We always have several devices in stock in a wide variety of configurations. We are happy to receive your inquiries. The prices listed start at €... Prices/offers are customized based on the device configuration. Njdpfx Aewbi E Ssgxswi Sample images of the devices. In stock in Vienna, 1230. Pallet shipping available for an additional charge: Austria approx. €180 Germany approx. €210 Europe upon request

Condition: good (used), Year of construction: 2011, Demmeler Turning Unit Robotix IP 4000 Max. height: 3500 mm Nwjdpfx Asw Rq Thogxji Servo-hydraulic drive Length: adjustable from 1000 to 12,000 mm Permissible weight: 11,000 kg Rotation: 360 degrees endless

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Nwedpfx Aszma E Djgxji Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high. Nwjdoynnliopfx Agxei

Condition: used, Year of construction: 2019, REF: MM6433 Zhangjiagang Beverage Machinery Co. Ltd (Chinese) single-head screw cap capping machine. Manufacturer - Zhangjiagang Beverage Machinery Co., Ltd. Model - FXJ-1. Date of manufacture - 2019. Capacity - up to 1,500 bottles / hour. Belt width - 82mm. Njdpfx Agsza Ekgoxewi Electrical requirements - 380 V / 509 hz / 3 phase. Overall dimensions - 3000mm long x 900mm wide x 1910mm high.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Nedey Uni Nopfx Agxowi Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: Nwedpfx Aozn Uqdsgxei External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Condition: Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Nwsdey Hlvwepfx Agxei Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Nsdpoy Hlkbsfx Agxjwi Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Year of construction: 2025, condition: used, Pall Emflon PFR 30” Filter - 1 of 19 available Unused and in Original Packaging Nwjdpfjxv Azysx Agxei Expiry date 23rd Feb 2026 hence the price Overview & Purpose - The Emflon® PFR / PFRW filter cartridges from Pall are sterilizing‑grade hydrophobic PTFE membrane filters designed for air and gas (vent & compressed gas) sterilization applications. +2 - They are used to provide a sterile barrier by removing microorganisms (bacteria, phages) and particulates from gas streams that contact sensitive process equipment or product. +2 - The filters are designed for repeated use, in situ steam sterilization, and validation / integrity testing

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.). Nwjdpozbkl Sofx Agxoi

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Nwedpfx Agew E Ey Tsxei Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Nwodsrq Eawjpfx Agxei

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter. Njdpewpunbjfx Agxswi

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Nwedpfx Aozbrv Ejgxsi Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.