Used Cross Wrap Oy Ltd Bale Opener for sale (17,771)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Nsdpfszp H R Eox Agxowi Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: ready for operation (used), Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible. Nedpjznx Nkofx Agxewi

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Nwodpoxfl Izjfx Agxei Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Nwsdpfsulc Sqjx Agxei Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Nodjvw I Niepfx Agxewi Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: used, Year of construction: 2013, _____Sale on behalf of customer:V Kuhn VBP 2160 Round BalerYear of manufacture: 201316,257 bales23 knives3D wrapperThe machine underwent a complete overhaul last winter:- new rotor,- new cutting floor,- new endless belts (original Kuhn),- pickup newly bearing-mounted,- tyres in good condition,- no maintenance backlog.The baler is in absolutely top condition and ready for immediate use without hesitation.We are selling the baler-wrapper combination due to a planned new purchase.Sale only after inspection.No warranty or guarantee.Storage location: not specified Nwsdpfxeylrtfj Agxei

Condition: good (used), Year of construction: 2019, 6x pallet wrappers, Jungheinrich, Premium, open turntable, Ø 1,500 mm, infinitely variable turntable drive – used -: Price ex-location: only €4,500 (net)! Manufacturer: Jungheinrich Type: Ameise Superstretch 152 30 GV mas3Ph Year of manufacture: 2019 / 2020 Model: Premium Max. pallet width: 800 mm Max. pallet length: 1200 mm Nedpfxoyrq D Ao Agxjwi Max. pallet weight: 1,500 kg Max. pallet height: 2,400 mm Pallet height detection Condition: good Available: immediately Location: Erfurt, later warehouse Augsburg Item no. 11 / ? / 17 / 36 / 37 / 40 /

Condition: new, Year of construction: 2023, _____Bale dimensions: 1.20 x 1.00 - 1.50 m Maximum bale weight: 1,100 kg Overall length: 4.55 meters Overall height: 2.51 meters Loading system: Side loading arm with clamping device Wrapping table: 4 belts Nwsdpfoki Einsx Agxsi Bale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when film runs out or film tears VT 30 terminal Fully automatic film cutter 1 EW (single-acting) and 1 pressure-free return or 1 DWS (double-acting) Special equipment: Magazine for 4 film rolls Storage location: null

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Nodpfezma E Djx Agxswi Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Nwedpeynnlijfx Agxei Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: used, Year of construction: 2019, REF: MM6433 Zhangjiagang Beverage Machinery Co. Ltd (Chinese) single-head screw cap capping machine. Manufacturer - Zhangjiagang Beverage Machinery Co., Ltd. Model - FXJ-1. Nwsdpfxoza Ekgj Agxei Date of manufacture - 2019. Capacity - up to 1,500 bottles / hour. Belt width - 82mm. Electrical requirements - 380 V / 509 hz / 3 phase. Overall dimensions - 3000mm long x 900mm wide x 1910mm high.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Nwedpjy Uni Njfx Agxsi Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Nedpfxozn Uqdj Agxjwi Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Condition: Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Nodpfx Aey Hlvwogxjwi Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months. Nwedpfxsy Hlkbs Agxji

Year of construction: 2025, condition: used, Pall Emflon PFR 30” Filter - 1 of 19 available Unused and in Original Packaging Nwodpfxoxv Azyo Agxji Expiry date 23rd Feb 2026 hence the price Overview & Purpose - The Emflon® PFR / PFRW filter cartridges from Pall are sterilizing‑grade hydrophobic PTFE membrane filters designed for air and gas (vent & compressed gas) sterilization applications. +2 - They are used to provide a sterile barrier by removing microorganisms (bacteria, phages) and particulates from gas streams that contact sensitive process equipment or product. +2 - The filters are designed for repeated use, in situ steam sterilization, and validation / integrity testing

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Nwjdszbkl Sspfx Agxei Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Nsdew E Ey Tepfx Agxowi Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Nwodpfx Aerq Eawegxsi

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Nodpfswpunbex Agxjwi Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. Nodpfszbrv Eex Agxowi WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Quin Systems PTSM322 Mini Machine Manager, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nedpfx Aei Ecl Degxjwi

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Nsdpfjzl Scrjx Agxswi Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Stainless steel drum in high grade 316 stainless steel Nedpeif Upfefx Agxjwi Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Ethercat servo-driven horizontal flighted conveyor. This conveyor has an advanced servo system with a matched drive and motor which only works off Ethercat plc systems. Perfect for accurate 'start / stop' work. Manufacturer - Jinan Hiwell Machinery Co. Ltd. Model - LPJ600-4. Serial number - 1661962. Date of manufacture - 2020. Belt dimensions - 3900mm L x 600mm W. Electrical requirements - 220 V / 50 hz / 1 phase. Nsdpfjzdvb Njx Agxowi