Used Cormak Docisk Pneumatyczny Do Piły Formatowej for sale (7,279)

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications Ljdpfxjvxtcqj Akweah The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Lsdpjy Shzajfx Akwoah Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: new, Year of construction: 2026, Automatyczna przecinarka taśmowa CORMAK HR350SA to zaawansowane technologicznie rozwiązanie dla profesjonalnych zakładów przemysłowych, wymagających wysokiej wydajności, powtarzalności oraz precyzji. Dzięki zastosowaniu nowoczesnych komponentów i konstrukcji dwukolumnowej, ta piła taśmowa do metalu zapewnia niezawodną pracę nawet w intensywnych warunkach produkcyjnych. Przecinarka obsługuje tryb manualny i w pełni zautomatyzowany, co pozwala dostosować sposób pracy do indywidualnych potrzeb operatora i rodzaju ciętego materiału. Główne atuty maszyny Automatyczny cykl cięcia – pełna automatyzacja procesów mocowania, podawania, cięcia i podnoszenia ramienia. Dwukolumnowa konstrukcja – zapewnia wyjątkową sztywność oraz precyzję prowadzenia brzeszczotu. Docisk imadła od góry – umożliwia bezpieczne i efektywne cięcie pakietów rur oraz profili. Hydrauliczny system podawania – precyzyjne pozycjonowanie detalu z dokładnością ±0,2 mm. Intuicyjne sterowanie – panel dotykowy LCD umożliwia szybkie ustawienie parametrów cięcia. Budowa i technologia Korpus przecinarki wykonany został z żeliwa, co zapewnia znakomitą tłumienność drgań i stabilność podczas pracy. Rama nośna nachylona pod kątem 3° względem stołu zwiększa efektywność przy cięciu elementów o przekroju prostokątnym. System prowadzenia brzeszczotu opiera się na precyzyjnych prowadnicach z łożyskami oraz wkładkami z węglików spiekanych, co redukuje zużycie taśmy i podnosi jakość cięcia. Hydrauliczne napinanie taśmy oraz trzybiegowy silnik z falownikiem gwarantują idealne dopasowanie parametrów do rodzaju materiału. Precyzja i wydajność pracy Dzięki zastosowaniu zaworu dławiącego możliwa jest płynna regulacja prędkości opadania ramienia, co przekłada się na kontrolowane cięcie bez ryzyka uszkodzenia detalu. System szybkiego posuwu skraca czas cyklu, a szczotka czyszcząca i system chłodzenia zwiększają żywotność piły. To niezawodne rozwiązanie dla wymagających klientów, którzy oczekują efektywności i powtarzalności. Zastosowanie Model HR350SA to idealna przecinarka taśmowa do rur i profili, stali konstrukcyjnych, nierdzewnych oraz innych metali. Przeznaczona do zastosowania w zakładach ślusarskich, firmach produkcyjnych i centrach obróbczych, gdzie kluczowe są wysoka jakość, automatyzacja i bezpieczeństwo pracy. Wyposażenie standardowe Tryb pracy automatyczny i manualny Panel sterowniczy z ekranem dotykowym LCD Hydrauliczne imadło z dociskiem górnym Szczotka czyszcząca taśmę z napędem Hydrauliczne napinanie taśmy Układ chłodzenia cieczą Bimetaliczna piła taśmowa Deklaracja zgodności CE i DTR Wyposażenie opcjonalne Rolkowe przedłużenia stołu podawczego Dane techniczne: HR350SA Zakres cięcia Ø350 mm / 350 x 350 mm Taśma 4515 x 34 x 1,1 mm Prędkości cięcia 27 / 45 / 69 m/min Ljdpowdunwsfx Akweah Moc całkowita 4,8 kW Zasilacz hydrauliczny 0,75 kW Pompa chłodziwa 0,04 kW Napinanie taśmy hydrauliczne Skok podajnika 500 mm Nośność 1500 kg Wysokość stołu 700 mm Wymiary (D x S x W) 2800 x 2200 x 1700 mm Waga 1500 kg

Condition: new, Year of construction: 2026, CORMAK H600SA Automatic Metal Band Saw The CORMAK H600SA automatic metal band saw is designed for cutting materials intended for further machining and production processes. The maximum cutting capacity is 600 × 600 mm. As a manufacturer, we offer this machine to metalworking facilities and companies looking to incorporate automatic cutting into their production operations. Key Advantages of the CORMAK H600SA - Maximum cutting capacity of 600 × 600 mm – an important parameter when selecting a band saw to match the dimensions of the materials to be processed. - Three cutting speeds – allow the operating speed to be selected according to the requirements of the planned cutting process. Ledj Ad Auaopfx Akwoah - Designed for solid materials – suitable for preparing material sections for subsequent production operations. - Saw blade dimensions of 6620 × 54 × 1.6 mm – the specified dimensions facilitate the selection of compatible replacement blades and planning the purchase of spare blades. Band Saw for Solid Materials – Applications The CORMAK H600SA band saw for solid materials is designed to cut raw stock into sections required for individual production orders. The cut material can then proceed to subsequent operations, such as drilling or component assembly, according to the production process used at the facility. This metal band saw is suitable for both in-house material preparation and contract machining services. When selecting a band saw, it is important to compare the maximum cutting capacity with the dimensions of the materials to be processed and the requirements of the planned operations. Before discussing machine selection, it is advisable to prepare an overview of typical cutting tasks, including material types, dimensions, and required cutting lengths. This makes it easier to evaluate the H600SA's specifications in relation to the specific requirements of the workstation. Three Cutting Speeds and Blade Selection The H600SA offers three cutting speeds: 27, 45, and 69 m/min. When selecting the appropriate speed, consider the requirements of the material being processed and the recommendations for the saw blade being used. The available speed settings can be compared with the planned technological requirements before purchase to assess their suitability for the tasks performed at the facility. The band saw uses a blade measuring 6620 × 54 × 1.6 mm. When ordering a replacement blade, make sure all three dimensions match. Providing the complete blade dimensions in your inquiry makes it easier to select a dimensionally compatible replacement. It is also advisable to specify the type of material to be cut to ensure the appropriate blade is selected for the intended application. Main Drive, Hydraulics, and Cooling System The main motor has a power output of 5.5 kW. The hydraulic power unit motor has a power output of 1.5 kW, while the coolant pump has a power output of 0.125 kW. Technical Specifications of the CORMAK H600SA Maximum cutting capacity 600 × 600 mm Cutting speeds 27, 45, 69 m/min Saw blade dimensions 6620 × 54 × 1.6 mm Main motor power 5.5 kW Hydraulic power unit motor power 1.5 kW Coolant pump power 0.125 kW

Condition: excellent (used), length: 4022 mm Lajdjz Hcbfopfx Akwoh width: 209 mm engine power: 0.092 kW

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, table height: 900 mm, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. Lasdpfx Aez Tdcxekwsh The saw is in very good technical condition and can be tested at our warehouse in Přerov.

Condition: new, Year of construction: 2026, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Full-length chip guard Ledpfoxd Upxox Akweah Coolant system 24V halogen work light Threading dial indicator Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Inch threads 0.5–28 TPI Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe Lodpfjznt I Iox Akwjah 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: used, Year of construction: 2026, Pneumatic hinge drill from BLUM. The pneumatic drilling feed ensures comfortable work and the ability to handle the material being processed with two hands. Machine description Standard equipped with BLUM drilling head. It stands out on the market by its massive structure, wide table, which enables a large support surface. The wide-spaced arms allow a long element to be placed between them. The drill has an intuitive control panel, where you can find, among others a safety switch or an easy-to-use feed speed control system. This model is equipped with a pneumatic drilling feed and pressure system. Quick and precise adjustment with 2 aluminum rulers, and the exact setting of the drilling size is secured by clamps with stoppers. INCLUDED: cutter Ø35 mm 2 x drill Ø2 mm air blow gun Technical parameters Inner diameter of the chuck 10 mm Max. drilling diameter 50 mm Max drilling depth 60mm Speed ​​ 2,800 rpm Engine power 1.5 kW / 400 V Working pressure 6-8 Bar Dimensions 900 x 850 x 1500 mm Weight 100 kg Ljdpfx Aks Ady Hmjwsah This machine is a customer return. Damaged tabletop panel and edge banding. NO WARRANTY OR RETURNS!!!

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H400SA The CORMAK H400SA automatic band saw is a high-performance machine designed for precise and repeatable cutting of large steel components, pipes, and closed profiles. Thanks to its double-column construction and automated operating cycle, it is an ideal solution for production plants, steel fabrication workshops, and logistics centers processing large quantities of material. Main advantages of the machine Fully automatic operation – complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. Hydraulic feeding system and vice – ensure fast, safe, and precise cutting. Arm and vice position memory – reduces cycle time and increases efficiency during serial production. Cooling system and powered cleaning brush – extend the service life of the metal cutting band saw blade. Large cutting capacity – allows cutting materials up to Ø400 mm or 400 × 400 mm. Construction and technology Lasdsyctr Rspfx Akwsh The double-column band saw H400SA is based on a stable steel structure with a cast iron body, ensuring maximum rigidity and effective vibration damping. The saw frame is positioned at a 3° angle relative to the feeding table, which improves cutting performance when processing profiles and structural sections. Precision and work efficiency The hydraulically controlled arm movement with adjustable cutting force and a precision throttle valve allows the cutting pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller enables programming of the cutting length and the number of pieces. The LCD display provides information about the cutting progress, errors, and material availability. The automatic stop system reacts to faults or completion of the programmed cutting cycle, reducing downtime and improving operational safety. Applications The CORMAK H400SA automatic band saw is perfectly suited for: metalworking and steel construction industries, profile and structural section processing centers, serial production in fabrication workshops and industrial plants, companies cutting materials to required lengths. Standard equipment Automatic operating cycle Arm and vice position memory system Hydraulic power unit and feeding system Powered blade cleaning brush Coolant circulation system Bimetallic metal cutting band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Technical data Parameter Value Cutting capacity Ø400 mm or 400 × 400 mm Saw blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Feeding stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 2100 kg

Condition: new, Year of construction: 2026, CORMAK LUP8E 8-Ton Electric Log Splitter The CORMAK LUP8E log splitter, with a splitting force of 8 tons, makes preparing firewood easier, reducing both physical effort and working time. The 400 V power supply allows the machine to be connected to a standard power socket. Machine Description - The machine is equipped with side tables that make it easier to feed wood for splitting. - Reliable and powerful 230 V electric motor. The motor has a power output of 3.0 kW (under heavy loads, the machine temporarily increases its power output to 3.5 kW!). - The log splitter ensures safe operation in accordance with EU standards, thanks in part to its dual-handle operating system. - The log splitter comes pre-filled with 4 litres of hydraulic oil – ready for operation immediately after purchase! - The angled splitting wedge makes it easier for the wedge to penetrate the wood. - The adjustable stop rod allows the wedge's return height to be set to any desired position. - Hydraulic oil level indicator. - Transport wheels. - User manual. - Convenient handle for transporting the machine. - Viscosity grade of the hydraulic oil used in the system – ISO VG22. The original and reliable hydraulic pump ensures long-lasting, trouble-free operation! RELIABLE, TROUBLE-FREE HYDRAULIC PUMP! Technical Specifications Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge forward speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Oil tank capacity 4 L Overall dimensions 1070 × 800 × 1500 mm Laedpfx Ajz Nh Ikjkwoh Weight 120 kg

Condition: new, Year of construction: 2026, Universal Metal Lathe CORMAK 410 × 1500 mm The CORMAK 410 × 1500 universal conventional metal lathe is a professional machine designed for precision machining of shafts, bushings, threads, cylindrical surfaces, and tapered surfaces. Thanks to its large distance between centers, rigid bed construction, and extended standard equipment package — including a 20 × 20 mm indexable turning tool set and a precision MT4 live center — it provides a complete machining solution for industrial plants and professional workshops. Main Advantages of the Machine Large 1500 mm distance between centers – enables machining of long shafts and large-length components. Rigid cast iron bed and base construction – hardened and ground working surfaces minimize vibration and ensure high machining accuracy. Large 52 mm spindle bore – allows machining of pipes and workpieces with larger diameters. Precision spindle bearing system – reinforced spindle support guarantees long-term accuracy and reliable operation. Removable bed gap section – enables machining of components with diameters up to 580 mm. 3-axis digital readout system – optical scales provide accurate control of carriage positioning. 16 spindle speed ranges – allows precise cutting parameter selection within a range of 45–1800 RPM. Direct thread selection system – enables machining of a wide range of metric, imperial, module, and DP threads without changing gears. Standard Equipment Set of turning tools 20 × 20 mm – 7 pcs. (with indexable inserts) Precision live center MT4 6 vibration isolators 3-axis digital readout system (optical scales) 3-jaw chuck 200 mm with complete set of jaws 4-jaw independent chuck 250 mm Faceplate 350 mm Fixed and follow steady rests Fixed center MT4 Spindle reducing sleeve MK6/MK4 Complete set of change gears Coolant system with pump Work lighting Lubricator, keys, and service tools Safety guards compliant with CE standards Operating manual and CE Declaration of Conformity Technical Specifications Parameter Value Lsdpfxerh E Sme Akweah 3-jaw chuck 200 mm Maximum turning diameter over bed 410 mm Maximum turning diameter over cross slide 255 mm Maximum turning diameter in bed gap 580 mm Bed gap length 190 mm Distance between centers 1500 mm Center height 205 mm Compound slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 1150 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges, 45–1800 RPM Available spindle speeds 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM Metric threads 42 ranges, 0.2–14 mm/rev Imperial threads 42 ranges, 2–72 TPI Module threads 18 ranges, 0.3–3.5 mm DP threads 21 ranges, 8–44 DP Longitudinal feeds 17 ranges, 0.05–1.7 mm/rev Cross feeds 17 ranges, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power (S1/S6) 2.2/2.64 kW or 3.3/3.96 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2440 × 900 × 1660 mm Net weight 1800 kg

Condition: new, Year of construction: 2026, Bag Clamp for CORMAK FM300, FM300S and FM300SA Dust Extraction Systems The CORMAK bag clamp is designed as a component for FM300, FM300S and FM300SA dust extraction systems. Its purpose is to securely attach the bag to the extraction outlet, providing a stable connection and reducing the risk of leaks during operation. Its solid construction and simple operation allow for quick bag replacement and efficient maintenance of the extraction system. Key Advantages Original CORMAK component ensuring a perfect fit for the extraction system. Secure bag attachment ensuring proper operation of the extraction system. Quick installation and removal for easy replacement of consumable components. Durable construction designed for regular use in workshops and manufacturing facilities. Application The clamp is designed for use with CORMAK FM300, FM300S and FM300SA dust extraction systems used in joineries, workshops and woodworking facilities. Ljdjzz N Tyopfx Akwoah Compatibility Specification Value Extraction system models FM300 / FM300S / FM300SA Component type Bag clamp Application Securing bags in dust extraction systems

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Lasdpfx Akoiz S Hasweh Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Lajdpfxjudi Uzo Akwsh Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, CORMAK TORNADO 360 × 1000 PLUS is a premium universal lathe designed for precision metalworking applications. Combining a rigid machine structure, a 2-axis Digital Readout (DRO), and comprehensive standard equipment, this model is ideally suited for production facilities, toolrooms, maintenance workshops, and technical training centers. Engineered for maximum efficiency and long-term reliability, it delivers excellent performance across a wide range of turning operations. Key Features 188 mm hardened and precision-ground bed provides outstanding rigidity and minimizes vibration during machining. 2-axis Digital Readout (DRO) enables precise positioning of the carriage along the X and Z axes. 52 mm spindle bore allows machining of larger-diameter shafts and bar stock. D1-5 Camlock spindle nose ensures secure, accurate, and quick chuck mounting. 2.0 kW main motor provides ample power for machining structural steels and alloy materials. Comprehensive gearbox supports 26 metric thread ranges, 34 imperial thread ranges, and both right-hand and left-hand threading. Removable gap bed increases the maximum turning diameter to 490 mm. Extensive standard equipment, including a 2-axis DRO, 3-jaw and 4-jaw chucks, faceplate, and additional change gears. Construction and Technology The CORMAK TORNADO 360 × 1000 PLUS features a heavy-duty cast iron bed that is induction-hardened and precision-ground for maximum rigidity, durability, and machining accuracy. The removable gap bed enables machining of larger-diameter workpieces when required. The tool post accepts cutting tools up to 20 × 20 mm, allowing the use of a wide variety of professional tooling. The drivetrain incorporates hardened and precision-ground gears, ensuring smooth power transmission, quiet operation, and extended service life. The spindle is supported by high-performance precision bearings, providing excellent rotational accuracy and stability under load. Precision and Productivity 2-axis Digital Readout (DRO) provides fast and accurate monitoring of tool position relative to the workpiece. Thread cutting without changing change gears significantly reduces setup time and improves workflow efficiency. Integrated thread chasing dial enables precise synchronization during thread cutting. Adjustable overload clutch protects the gearbox and feed mechanisms against damage caused by excessive loads. Applications The CORMAK TORNADO 360 × 1000 PLUS is ideal for: Industrial manufacturing facilities Machine shops and toolrooms Technical training centers and educational workshops Maintenance departments and prototype production Standard Equipment Machine stand 200 mm 3-jaw chuck 4-jaw chuck Faceplate Fixed steady rest Follow rest 2-axis Digital Readout (DRO) Chip tray and tool storage drawer Coolant system Technical Specifications Specification Value 3-jaw chuck 200 mm Swing over bed 360 mm Swing over cross slide 225 mm Swing over gap 490 mm Distance between centers 1000 mm Spindle bore 52 mm Spindle speed range 70–2000 RPM (8 speeds) Spindle nose D1-5 Camlock Spindle taper MT6 Metric thread range 26 pitches, 0.4–7 mm Imperial thread range 34 pitches, 4–56 TPI Tailstock taper MT4 Tailstock quill diameter 42 mm Tailstock quill travel 100 mm Main motor 2.0 / 2.4 kW, 400 V Lsdpfx Ajiz S R Njkweah Machine dimensions (L × W × H) 1800 × 750 × 1650 mm Weight 760 kg (±2%)

Year of construction: 2026, condition: used, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Thanks to advanced refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for standard industrial compressed air installations. High efficiency — capacity of up to 2800 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.58 kW. Automatic condensate drain valve — ensures reliable removal of condensate without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Safe R134a refrigerant — provides high operating efficiency while meeting modern environmental standards. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and increases the service life of system components. Lsdpfx Ako Adyw Ejwoah Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 2800 l/min Power consumption 0.58 kW Supply voltage 230 V Dimensions (L × W × H) 420 × 700 × 690 mm Weight 37 kg Refrigerant type and quantity R134a, 550 g WARNING!!! This machine is a customer return. Damaged housing, numerous scuffs and dents. NO WARRANTY OR RETURNS!

Condition: new, Year of construction: 2026, CORMAK OE4.0 TUNGSTEN ELECTRODE GRINDER – PRECISE TIG SHARPENING 1–4MM The CORMAK OE4.0 tungsten electrode grinder is a professional device designed for welding shops and industrial workshops, enabling fast, precise and repeatable preparation of TIG electrodes with diameters of 1–4mm. Thanks to its compact, solid construction and adjustable rotational speed, it ensures welding arc stability and the highest weld quality. Main advantages of the CORMAK OE4.0 grinder Versatile operation: one device for angle sharpening, end grinding and cutting the electrode to length. Precise sharpening angles: 15°, 18°, 22.5°, 30° ensuring repeatable results and a stable welding arc. Rotational speed adjustment: adaptation to the electrode diameter ensures process control and minimises the risk of overheating. Compact and mobile construction: easy to carry, ideal for workshops and service work. Low noise level and safety: fully compliant with EU standards, equipped with guards and occupational safety micro-switches. Complete consumables set: spare motor brushes included, increasing reliability and continuity of operation. Lasdjzfgi Hspfx Akweh Construction and technology of the device The CORMAK OE4.0 grinder has been designed for professional preparation of tungsten electrodes. A solid spindle bearing and precisely made housing construction minimise vibrations during operation. The 750W motor with rotational speed adjustment (up to 11,000rpm) allows the sharpening process to be adapted to the electrode diameter, ensuring repeatable results. The grinding disc cooling system and ergonomic electrode mounting guarantee safety and device durability. Precision and work efficiency Thanks to adjustable sharpening angles and the end grinding function, the CORMAK OE4.0 enables tungsten electrodes for TIG welding to be prepared in a repeatable and efficient way. Each electrode is sharpened according to the required specification, which directly translates into arc stability, reduced spatter and savings in welding material. The electrode cutting function allows the electrode length to be quickly adapted to the requirements of the welding station. Application of the tungsten electrode grinder The CORMAK OE4.0 device is used in: TIG welding, both AC and DC, in industrial and production plants, welding workshops, service departments and repair points, industrial installations requiring high precision and repeatability of welds, production processes where electrode preparation time and quality are crucial. Standard equipment CORMAK OE4.0 grinder with electrode sharpening, end grinding and cutting functions, Guards and micro-switches compliant with occupational safety standards, Spare motor brushes, User manual and CE and EC conformity documentation. Technical parameters – CORMAK OE4.0 Power supply 230V 50–60Hz Motor power 750W Rotational speed 11,000rpm Electrode diameter range 1.0–4.0mm Minimum electrode length 30mm Sharpening angles 15°, 18°, 22.5°, 30° Disc diameter Ø33.5 × Ø5 × 2.4mm Dimensions 340 × 76 × 76mm Weight 1.6kg

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg Laedoy Sf Ukepfx Akwoh

Condition: new, Year of construction: 2026, CORMAK LUP16 Log Splitter – Professional 16-Ton Vertical Hydraulic Wood Splitter The CORMAK LUP16 is a professional vertical hydraulic log splitter designed for intensive use in farms, sawmills, and wood processing facilities. Thanks to its robust construction, high operating performance, and a hydraulic cylinder generating 16 tons of splitting force, the machine easily handles large-diameter logs. This reliable hydraulic wood splitter combines efficiency with precise operation, making it an excellent solution for continuous-duty applications. Main advantages of the machine 16-ton splitting force – efficiently splits hard, wet, and seasoned wood with large diameters. Vertical working design – optimised for heavy logs and provides ergonomic operation. Hydraulic system with overload protection valve – protects the pump and hydraulic system against excessive loads. High-performance gear pump – ensures consistent oil flow and reliable long-term operation. Adjustable splitting speed – allows precise adjustment depending on the type of wood (from 4.6 to 14.2 cm/s). Log lifting system – makes positioning heavy logs under the wedge easier and reduces physical effort. Design and technology The CORMAK LUP16 splitter is built on a robust steel frame with increased resistance to deformation, while all working components are designed for continuous operation. The angled splitting wedge improves penetration into the wood, reducing the splitting cycle time. The machine is powered by a three-phase 4.5 kW (400 V) electric motor, providing sufficient power for intensive splitting of thick and hard wood. Precision and work efficiency The LUP16 model allows processing logs up to 1100 mm in length and 700 mm in diameter, making it a versatile solution for a wide range of applications. The 948 mm wedge stroke ensures complete splitting in a single cycle. The adjustable splitting speed range of 4.6–14.2 cm/s and return speed of 6.2 cm/s allow the operator to optimise performance for maximum productivity. Applications The CORMAK LUP16 electric log splitter is designed for: Firewood production companies Municipal services and forestry operations Agricultural farms Professional individual users Woodworking workshops and processing plants The machine is suitable for various types of wood, from softwood species to hard deciduous timber, including both fresh and seasoned logs. Standard equipment Hydraulic gear pump Log lifting system Angled splitting wedge Overload protection valve 5-pin industrial power connector Optional equipment Four-way splitting wedge for dividing logs into four pieces Technical specifications Parameter Value Splitting force 16 tons Minimum log diameter 80 mm Maximum log diameter 700 mm Minimum log length 350 mm Maximum log length 1100 mm Lajdpfx Akjuqiq Dowsh Splitting speed (continuously adjustable) 4.6–14.2 cm/s Return speed 6.2 cm/s Wedge stroke length 948 mm Motor power 4.5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic system pressure 27.7 MPa Dimensions 1050 × 1550 × 2500 mm Weight approx. 259 kg

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Long Service Life The professional 8-ton log splitter is designed for efficient wood splitting with maximum reliability and durability. Its solid construction and high-quality splitting wedge ensure long service life and trouble-free operation. The machine is intended for splitting logs with a diameter of up to approximately 450 mm. Its stable and robust design provides excellent performance and consistent results. The splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Ljdoridpaepfx Akweah Device description Side support tables included – make feeding and positioning logs easier. Powerful and reliable 230 V electric motor – rated power of 3.0 kW, with temporary power increase up to 3.5 kW during heavy-duty operation. Safe operation compliant with EU standards – equipped with a two-hand control system for increased operator protection. Hydraulic system filled with 4 litres of oil – the machine is ready for immediate operation after purchase. Angled splitting wedge – improves wedge penetration into the wood. 4-way splitting wedge included as standard – allows splitting logs into four pieces in a single operation. Adjustable stop rod – allows the return height of the wedge to be set according to user requirements. Hydraulic oil level indicator – enables easy monitoring of the oil level. Transport wheels – provide convenient movement of the machine. Operating manual included. Comfortable transport handle – simplifies handling and relocation. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and maintenance-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge feed speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: new, Year of construction: 2026, CORMAK LUP7T WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation system, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7T if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7T wood splitter The CORMAK LUP7T wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Lasdpozarp Njfx Akwsh Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7T model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7T is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for use at home, on a farm, or in a small service point. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage compared to stand-mounted versions The CORMAK LUP7T is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover over the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Technical parameters of CORMAK LUP7T: Splitting force: max. 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Standard equipment CORMAK LUP7T hydraulic wood splitter Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. Ljdpfxezarv As Akweah The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Condition: new, Year of construction: 2026, The WP600 self-centering three-jaw chuck is a precise and highly durable solution designed for use with welding positioners and welding rotators. Thanks to its advanced construction and wide clamping range, it enables fast and accurate clamping of cylindrical or hexagonal workpieces with considerable weight. It is ideal for professional production and workshop applications where stability and process repeatability are essential. Key Features of the WP600 Chuck High clamping force – up to 1,200 kg, ensuring secure and reliable clamping even for very large workpieces. Clamping range of 300–600 mm – ideal for large-diameter pipes and components. Load capacity of 1,000 kg – designed for heavy workpieces being welded or machined in rotation. Self-centering three-jaw mechanism – ensures precise axial positioning of the workpiece. Lasdozwmtiopfx Akwsh Versatile applications – suitable for pipes, square and hexagonal profiles, as well as irregularly shaped workpieces. Construction and Technology The WP600 is equipped with three robust self-centering jaws made of tool steel with increased wear resistance. The jaws are synchronized by a precision mechanical system, ensuring stable and accurate clamping. The Ø360 mm central through-hole allows long pipes to pass through the chuck, significantly expanding its range of applications in welding and assembly processes. Precision and Operating Efficiency The WP600 chuck reduces workpiece setup time for welding or machining while ensuring high positioning accuracy. The repeatability and precision of clamping directly contribute to the quality of welds and machining operations. It is an ideal solution for facilities requiring efficient integration with welding rotators and the highest possible production quality. Applications The WP600 chuck is perfectly suited for use with welding rotators and welding positioners. It is designed for clamping large and heavy workpieces, including: Pipes Flanges Tanks Frames Specialized structural components It is particularly suitable for structural steel fabrication, the power industry, tank manufacturing, and companies performing circumferential welding and precision assembly. Technical Specifications Specification Value Model WP-600 Maximum clamping force 1,200 kg Maximum load capacity 1,000 kg Through-hole diameter Ø360 mm Clamping range Ø300–600 mm

Condition: new, Year of construction: 2026, CORMAK S440R Metal Band Saw The professional CORMAK S440R semi-automatic metal band saw is an industrial-grade machine designed for precise and repeatable cutting of pipes, profiles, and solid materials. Its high power, heavy-duty construction, and fully automated operating cycle ensure reliable performance even under demanding conditions and in serial production. Ledpfx Aei Dx R Nskwoah Main Advantages Semi-automatic operating cycle – hydraulic control of the vise and saw arm movement High 4.4 kW motor power enables cutting of difficult-to-machine materials Rigid cast-iron saw arm reduces vibrations and ensures high cutting precision Smooth band speed adjustment – 20–90 m/min (inverter-controlled) Swiveling saw arm enables angled cutting from 60° to the left to 60° to the right Excellent ergonomics – separate control panel with LCD display and clear controls Construction and Technology The CORMAK S440R is based on a stable body and a cast-iron saw arm, which minimizes vibrations and improves cutting quality. The high-quality band drive, controlled by an inverter, allows the cutting speed to be adjusted to the type of material being processed. The 34 mm wide cutting band operates with carbide guide systems, ensuring durability and precision. Cutting Precision and Performance The cutting cycle is performed automatically: material clamping, band start-up, controlled lowering of the saw arm, stopping after the cut, and returning to the starting position. This solution significantly reduces operating time and minimizes errors resulting from manual operation. The angle reading system and arm position memory function support precise and repeatable cuts in serial production. Applications The machine is designed for cutting structural, tool, and stainless steels. It is ideal for cutting pipes, steel profiles, bars, and sections in metalworking shops, manufacturing plants, and tool rooms. It performs excellently in both serial and one-off production. Standard Equipment PLC controller Semi-automatic operating cycle Control console with LCD display Hydraulic control of the vise and saw arm (up/down) Saw arm position memory Digital cutting angle display Saw arm rotation: 60°L – 45°L – 0° – 45°R – 60°R Powered cleaning brush Closed-loop cooling system Bi-metal band saw blade Technical documentation + CE Declaration of Conformity Technical Specifications Minimum cutting diameter Ø5 mm Minimum material length in the vise 30 mm Distance from vise base to floor 780 mm Band dimensions 5200 × 34 × 1.1 mm Total power 4.4 kW Band speed 20–90 m/min Dimensions (L × W × H) 2500 × 1900 × 1450 mm Weight 1100 kg Looking for a reliable semi-automatic metal band saw? Choose the CORMAK S440R and rely on high performance, precision, and professional-grade quality.