Used Contour Measuring Device for sale (17,000)

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 500 mm, warranty duration: 19 months, total height: 1,170 mm, type of input current: AC, total width: 600 mm, total length: 850 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 500 mm, overall weight: 250 kg, input voltage: 230 V, table width: 450 mm, table height: 110 mm, table length: 600 mm, feed length X-axis: 100 mm, feed length Z-axis: 500 mm, Equipment: documentation/manual, type plate available, We are offering this nearly new Mitutoyo Avant FTA - H4 D4000-D contour/roughness measuring instrument, year of manufacture (2022). According to the nameplate, the machine was built in 2022 but was only delivered to us and put into operation for the first time in November 2025. It has been used once since then and is therefore like new. All original accessories are included, as well as the transport cases for both measuring arms. The software key is also provided. Itsdpfxsy Dcfkj Aa Ish If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Mitutoyo contour&roughness measuring machine Formtracer CS 3000 H4 in very good condition measuring ranges: Z = 5mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 5.3 Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Included are a lot of measuring tip (new price appx. € 3.000,--) Optionally we offer installation, calibration and softwaretraining Isdpfxjp Ecg Rj Aa Isth Price is for delivery inside european union

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 1 mm, travel distance Z-axis: 550 mm, Mitutoyo roughness measuring machine Surftst SV 3100 H4 in very good condition measuring ranges: Iedpfx Aasrdg H Us Ijth Z = 0,8mm (stage 550mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 4.0 machine will be equiped with a very new roughness sensor (4mN) Overhauled measuring table (50x100mm) and self centering vice for € 2.500,-- on demand. Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: refurbished (used), functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 40 mm, travel distance Z-axis: 350 mm, Mitutoyo contou measuring machine Contracer CBH400 in very good condition measuring ranges: Z = 40mm X = 100mm Stage = 350mm Machine was completely overhauled und got a used PC with Windows 7 (new installed) and software Mitutoyo Formpakpak (new Formtracepak as an option) Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Itedpfoum Etmsx Aa Ieh Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 25 mm, measuring range Z-axis: 1 mm, Well-maintained Mitutoyo surface roughness tester Surftest, model SV402. Measuring ranges: Z = 0.8mm, X = 50mm. Includes: Mitutoyo measuring stand with mounting plate, roughness reference standard, standard measuring probe 4mN, 90°, built-in printer. Itodpox N Ukpsfx Aa Ish Optional: Various measuring probes from €250, used vise €100. Price includes delivery within the EU.

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 12 mm, Mitutoyo roughness measuring machine Surftst SJ301 in good condition incl. CEJ stand, but without carrying case and roughness standard (option) measuring ranges: Z = 0,3mm (optional stage 550mm) X = 12.5mm Iedpjxluiuefx Aa Ijth Optional: Rougness standard new € 390,-- optional stylus from € 800,-- (different types) Vice (used) € 100,-- some prisms on demand Mitutoyo Stage 178-039 upgrade € 450,--

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. Max. workpiece weight 30 kg at a center height of 100 mm 80 kg at a center height of 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable throw: 100 mm Center height: 100 mm Measuring blades/probe and caliper: 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Type: Helio-Pan II 700 Scope of delivery: (See image) Iodpfx Aszd R U Dea Ioth We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. This coordinate measuring machine is designed for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control system, rotary/swivel probe & probe changing library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control system from RENISHAW SPA2 servo power amplifier UCC2 controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone. Isdpfx Aajzd N Shs Ijth

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Iodpfxezcgy Ue Aa Ijth Output signal: 1 Vpp Reference mark: In the center of the measuring length Mounting type: Integrated mounting strip Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Condition: used, Technical details: checking height: ca. 600 mm Itjdpfx Aaou N Aw Ne Ish voltage: 220V / 80VA machine weight approx.: auf Anfrage kg dimension machine xH: Messständer: 0,75x0,45x1,04 m dimensions L x W x H: Messwertaufnehmer: 0,32x0,51x0,23 m Surface Measuring Device Control unit module TPX Base plate/granite plate with T-slot: Size=L:650 x W:450 x H: 80mm Travelling beam travel Z = 600mm, by hand knob, and swivel 45° Measuring device, type perthometer PRK, size L:330 x W:150 x H:105mm; measuring head insert type Perthon RFHTB-250, Y-travel=60mm automatic/manual, as well as Z-travel=40mm via knurled wheel Measuring sensor, type Perthometer, digital display with printer Equipped with accessory box with various measuring head inserts (photo comparable) *

Condition: used, Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. Iedpfxou N Awve Aa Ieth *

Condition: good (used), Year of construction: 2019, Volume measuring device including weight detection for master data acquisition, Bosche – used - : Price ex location: €8,500 (net)! Manufacturer: Bosche Weighing Technology Type: zippcube Should be size M Serial no.: Z201900158 Year of manufacture: should be 2019 Max. 50 kg 16-20 V/DC Scale net weight: 110 kg With display HMI 12 Isdpfxjxqffdj Aa Isth Combined volume and weight capture in a single pass Ideal for master data acquisition with space requirement measurement Original price: approx. €20,000 (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells, and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach

Condition: used, High-voltage tester, high-voltage testing device, high-voltage tester for HV, PE, IS measurement Testing console, testing station, measuring station, testing device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure voltage strength, insulation resistance, and the voltage drop of the protective conductor in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground potential and can be set to a maximum of 300 V. Serial No.: Year of manufacture 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit Itsdpfxjd Dc Unj Aa Ish ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact, on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices are available under storage numbers 57820 and 57821.

Condition: used, Electronic crane scale MWT type 142 Make No.: 142571 Year of construction 1993 Tensile force measuring device, crane scale Measuring range: 2.500 to 80.000 kg Smallest measured value: 20 kg Isdpfx Ajg D H Rija Ieth Power supply via 12 Volt accumulator - Suspension shackle for double hook, anchor hook - Operation, storage of measured values and tare via remote control - Memory for measured values (weights) - Printer for measured values very massive and high quality body made of steel own weight: approx. 200 kg

Year of construction: 2009, condition: used, Technical details: x-travel: - mm Ijdsvr Stzspfx Aa Isth y-travel: - mm z-travel: - mm operating pressure: max 10 bar bar voltage: 380 V voltage: 50 Hz machine weight approx.: 228 kg dimension machine xH: 0,98 x 0,65 x 1,16 m Es handelt sich hierbei um ein Bremsprüfgerät Pdr7. Das Gerät können wir nur über den PC in die Position "nach oben fahren" bewegen. Da es sich hierbei um ein Bremsprüfgerät für die Fahrzeuginstandhaltung (speziell für Schienenfahrzeuge der DB) handelt, sollte sich die Freischaltung über den Hersteller eingeholt werden. Wir bieten das Bremsgerät wie beschrieben und steht an. *

Condition: used, Technical details: machine weight approx.: auf Anfrage kg voltage: 50 Hz current- max.: 230 A dimension machine xH: auf Anfrage m Measured value capture processing Recording of machine quality measurements Iodpfx Aou N Avlsa Ieth ‘Mode of operation: Measuring the relative movement between tool and workpiece.’ (Excerpt from operating instructions) Measuring computer Device options: -sequential measurement -Test plan management -16 features -sequence triggering -Diskette drive Control unit manufacturer Nieberding, serial no. 8-19863 with connection for air conditioning and shut-off valve Equipment: 2x precision measuring display and maintenance box Accessories Test mandrel Ø 48mm and test device *

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: MS06001129, The MlttiScan 600 is used for capturing master data. Itedpoy U Upvofx Aa Ioh The articles are measured and weighed using 3D measurement technology.

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Of particular note is the extensive range of accessories, as well as the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC/peripherals Measuring functions: Height measurement Internal and external measurement Diameter determination Distance measurement 2D/3D point measurement Geometry and position calculations Equipment: Granite measuring plate Isdpfx Aey Tkg Uja Ioth Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders Accessories case / wooden box

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: Itjdpfx Aajw Sav Io Ijh • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Itjdpfx Aasxtwxuj Ieh

Condition: used, for Morse taper: MK 4 incl. test pin, storage box Iedpfx Aocftv Aea Isth

Condition: used, for Morse taper: MK 3 Itjdpfxjcftvwj Aa Ieh incl. test pin, storage box

Condition: used, for Morse taper: MK 2 Itsdpfx Ascftvxja Ish incl. test pin, storage box

Condition: new, Measuring area: 75 - 88 mm Iedpfx Ajd Efd Isa Ioth

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Isdpfx Aajxn Ax Ao Ioth