Used Mafell Zs 260 E for sale (8)

Condition: used, Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906 Itsdovwfy Sjpfx Aa Esr

Condition: good (used), Mafell Tenon Milling Machine ZAF 160 – Professional Tenoning Machine For sale is a Mafell ZAF 160 tenon milling machine, ideal for carpentry workshops, timber construction, and restoration companies. This machine enables highly precise tenon joints, even with large timber cross-sections and angled cuts. Technical Specifications Maximum timber dimensions: - Right angle: 320 × 160 mm - Tenoning at 60° angle: 160 × 160 mm - Flattening (ridge/hip joints, etc.), right angle and up to 45° angle: 230 × 160 mm Clamping of the workpiece: manual Setting of tenon dimensions: manual via scale Variable tenon length: up to 110 mm Itodpfxjx D Az Ne Aa Esr Flattening in a single operation: max. 110 mm Flattening width: max. 160 mm Working height: 750 mm Support with scale (length stop): 3 m Motor: - Three-phase 400 V / 50–60 Hz - Input power: 6000 W - Output power (nominal load): 4500 W - Milling head speed: 6670 rpm - Cutting speed: 32.8 m/s - Feed speed: approx. 2.2 m/min Tool dimensions: - 100 × 110 mm, carbide-tipped - 165 × 40 mm, carbide-tipped + carbide-tipped fiber knife Extraction: - Connection: 2 × 100 mm diameter Space requirements: approx. 400 × 140 cm Weight: approx. 380 kg You will receive an invoice with VAT stated separately. Price: €10,500 net

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden Itsdjd St R Sjpfx Aa Esr - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: ready for operation (used), Technical characteristics Itodpfx Aast Dgape Eer Power and Motors Overall dimensions Weight: 9 Kg

Condition: new, Technical data:Rated voltage 230 VRated input 3050 WEdge height 10 - 65 mmSwiveling range 0 - 50 °Edge thickness 0.4 - 3.0 mmHeating time 30 sTemperature max. 520 degrees CelsiusFeed stepless 1 - 5.5 m/minDimension (L x W x H) 220 x 160 x 360 mmConnection compressed air 6 - 10 barInner radius min. 10 mmWeight 10.8 kg Iedpfx Aswi Nt Eja Eetr

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Iodpfx Asud At Roa Estr

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Isdpfx Aowazn Asa Eetr Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: new, weight of the machine ca. 392 kg Iedpfx Aovwgfvja Eetr