Used Complete Painting Plant for sale (18,188)

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Crjdpfozzd Dmsx Adheh Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: like new (used), Year of construction: 2023, operating hours: 600 h, functionality: fully functional, feed length X-axis: 1,500 mm, workpiece weight (max.): 100 kg, working width: 1,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 400 V, Equipment: cabin, Painting system with two separate pumps, allowing for the use of different liquids (e.g., gloss and matte paint). System manufactured in 2023. Selling due to a change in printing technology. Crsdpfxszfy Upj Adhjh

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Credpexm Twtsfx Adhjh Technical data provided in the documentation.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Crodpfey E Huxsx Adhsh

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Crsdpfotpp H Eex Adhjh

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Cedszf Iyaspfx Adhjrh Four-sided impregnation machine + drying tunnel.

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l Credozk Epcopfx Adheh 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Codpfx Adsz Hbm Tshsrh Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: used, Drying tunnel for Impregnirka with CM Macchine RMS 40x800 discharge system. Tunnel length: 7800 mm Width: 310 mm Credjz Aiv Repfx Adhoh Side material discharge.

Condition: good (used), GR6100 robot with hollow wrist Hollow wrist and axis 3 for routing paint hoses Csdpoyxmt Uefx Adhorh Flange for 3 spray guns Light barrier/reading barrier Connection for automatic color change

Condition: excellent (used), Year of construction: 2019, VIDALI painting system Spray booth with overhead conveyor. Crsdpszx Rxxjfx Adhjh

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 61115/1, Automatic painting line - Cefla, the machine is located at the Matis doo plant and is operational. Cjdpsyuwvdjfx Adherh

Condition: excellent (used), Year of construction: 2001, Complete Parquet painting shop Manufacturer - SORBINI/ VIET Year - 2001 Credjrdgrvepfx Adhoh Capacity - 800 m2/shift Time of one cycle - 8 min. Lenght of the line - 42 m

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours Crodpfx Adozlxilehoh VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: used, Year of construction: 2001, machine/vehicle number: 9830-01, working width: 1,300 mm, roller diameter: 250 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The coating system consists of several individual machines, which are composed as follows: Crjdpfx Adoy Uwnbehsh Pos. 1 - MANFRED LAMPRECHT MASCHINENBAU BM 1300 - V (Brushing machine) Working width max.: 1,300 mm Total power: 4.2 kW Pos. 2 - BURKLE SAS 1300 (Coating machine) Working width max.: 1,300 mm Diameter of application roller: 250 mm Coating units: 3 Coating unit 1 Unit type: Metering unit Material: Steel Roller diameter: 180 mm Coating unit 2 Unit type: Application unit Material: Rubber Roller diameter: 250 mm Coating unit 3 Unit type: Filling unit Material: Steel Roller diameter: 250 mm Pos. 3 - BURKLE UV SYSTEM Working width max.: 1,300 mm Drying system: Ultraviolet lamps - UV System type: Motorized feed rollers Pos. 4 - BURKLE SLC 1300 (Coating machine) Working width max.: 1,300 mm Diameter of application roller: 250 mm Coating units: 2 Coating unit 1 Unit type: Metering unit Material: Steel Roller diameter: 180 mm Coating unit 2 Unit type: Application unit Material: Rubber Roller diameter: 250 mm Pos. 5 - HACKEMACK KTR 3370 (Drying machine) Working width max.: 1,300 mm Drying system: Ultraviolet lamps - UV Number of lamps: 2 System type: Feed belt The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8542

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS Codpfx Adezq Axzjherh • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Credjztc Nfopfx Adhoh Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: used, No. 3280 Complete painting line / water-wash spray booths Csdpfxjzhblne Adhjrh Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Cjdozv S Tlopfx Adhorh Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: good (used), Item: NO-2003-Dairy-Cheeseplant Complete Dairy Cheese Plant Consisting of: - 3 pc Damrow Double-O cheese vats volume 12.000 liter. 2650 x 4000 x H 3150 mm - 1 pc Gadan Prepress unit with cutting and filling curd to moulds. 2200 x 10.000 x H 2600 mm - 1 pc Gadan Final Cheese Press with moulds 280X340 mm 2700 x 9300 x H 1800 mm - 1 press stand for pre-presser 3100 x 3900 x H 3700 mm - 1 intermediate station Crsdpskzk Ddofx Adhjh 2200 x 2700 x H 3150 mm - 1 pc Unit to take out cheese from moulds. 550 x 2150 x H 1400 mm - 1 end station 1600 x 3260 x H 2750 mm Equipment has been running until week 10 and will be dismantled starting week 16-17 Can also supply Brine system. We can dismantle and pack complete plant in Container/Trucks See attached pictures and video

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). Cedpfxoz Ad Dcj Adhjrh 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: like new (used), Year of construction: 1995, manufacturer: Kleemann year of construction: 1995 type: SHB 10/90 Codpsr A Dm Sofx Adherh opening size: 1020 x 900 mm impactor weight: ca. 14,9 to

Condition: good (used), Year of construction: 2005, Complete industrial paint booth, manufacturer Walther: 1 single booth + 1 double booth. Drawings with dimensions are available upon request. Cedpfsxvbdmjx Adhorh

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters Cedpfx Aex Tuu Njdhorh No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Cedpfxowgc Udj Adhsrh Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank