Used Chain Plates for sale (13,590)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Crodpfx Aasyuty Ssxed Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: used, functionality: fully functional, Fezer panel lifter with electric chain hoist PS 5 with rails, 250 kg load capacity, ideal for loading panel saws. Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Cjdpfxew E Irfj Aaxjrd

Condition: used, • Dimensions (mm): 80 x 60 • Rubber plate Codpfx Asbxp Eaeaxsrd • Mounting bracket

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available. Cjdpfszg Hd Tex Aaxjrd

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. Codpfjtp S E Esx Aaxjrd The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. Crodeyznu Sepfx Aaxed All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Crsdpjwd Tgfofx Aaxsd Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m Crjdpeufib Rofx Aaxjd - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Csdpfx Aezd A Rdsaxerd Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Cedpfx Ajzimvujaxord

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Crsdpfsvd Eiyox Aaxjd

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 Crodpfozi Ra Rex Aaxsd MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. Cedpfozbrv Eox Aaxord WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Cjdpfey E N Hdsx Aaxord Hypertherm Plasma. Kemper Extraction Unit

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 Crjdpevkphgofx Aaxed punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Codjxau D Ispfx Aaxjrd Bending speed 1,5 / 5 m/min. Motor power 16 kW

Year of construction: 2012, condition: good (used), Ficep Gemini HD36 GANTRY PLATE PROCESSING CENTRE, AUTOMATIC CNC DRILLING, MILLING AND THERMAL CUTTING SYSTEM, serial no. 33275, year of manufacture Cjdeivfc Ropfx Aaxord 2012, 127mm max. thickness, 520N/mm² tensile strength, with fitted eight head tool holder, Hypertherm HyPerformance plasma HPR260XD power supply unit, galvanised steel ducting, Autchazioni AVV.2KW fume extraction unit, approx. 3.5m x 1.75m x 3.9m high, machine bed approx. 9.4m x 3.8m wide

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 Crodpewphgdofx Aaxjd · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: excellent (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate Crjdpfxjzka Uao Aaxod -Clamping surface: Ø 1600 mm -Plate height: 70 mm -Control unit: Type ST214 -Remote control: Type KEYBOARD ST210 -Connection: 400 volts -Magnetic plate weight: 960 kg -Dimensions: 1650/1600/H270 mm -Weight: 997 kg

Condition: used, Year of construction: 1963, total length: 2,000 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 1.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: H2111 - Drive system: Conventional - Number of rolls [pcs.]: 3 Crodpfx Aszhw Dtoaxod - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1550 - Transport dimensions: 2000mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Model: VRM-hy 3000×15 Serial number: WO 10842 Year of manufacture: 1992 Cedjx Sqc Topfx Aaxerd If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. Codpfoziwzhjx Aaxerd With cast support under the panel, height 100 mm.

Condition: good (used), Year of construction: 2005, sheet width 2560 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop * With T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms Crsdpfx Aozh N U Rsaxsd - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: used, Year of construction: 1992, operating hours: 16,862 h, KOMATSU PC 300 NLC-5K * Year of manufacture: 1992 * Operating hours: 16,862 h Csdpfxezhp Nhj Aaxsrd * Undercarriage in good condition * Lehnhoff quick-coupler bucket included * Good condition, ready for operation

Condition: excellent (used), functionality: fully functional, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,033 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Schaeff TC125 / Adjustable Boom / 1,033 hrs / Power-Tilt Rotator • Manufacturer: Schaeff Terex • Model: TC 125 • Year: 2021 • Operating hours: 1,033 hrs • Power: 85 kW / 115 hp • Engine: Deutz TD 3.6 L4 • Dozer blade • High and low speed settings • Reversing camera • Power-Tilt • Air conditioning • Radio • Central lubrication system • Swing arm • Hydraulic lines for hammer, grab, and shear • Track undercarriage 90% • Digging bucket: Lenhoff universal bucket CB10M/SW08 • Total weight: 12,100 kg • Quick coupler • German machine Codpfoywlhusx Aaxjrd • Immediately ready for use • Top condition, like new • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale subject to our terms and conditions.