Used Beha Unitest Power Analyzer 93555 for sale (40,318)

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Hfsdpfx Ajx A Imzsp Eon Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: good (used), For sale: FLUKE 1735 Power Logger Analyst – a power quality analyzer and data logger, complete with the accessories shown in the photos. This device enables the measurement and recording of voltage, current, frequency, power, harmonics, and events in electrical installations. Technical condition: Hfsdpfx Apsz Spg Ne Esn The analyzer powers on, the display works, and it shows voltage measurements on all three phases. Known defect: One of the cables in the current loop set is damaged, causing the current measurement from that loop to function incorrectly. The cable requires repair or replacement. The set is being sold with the described defect. Included accessories: Fluke 1735 analyzer, Set of flexible loops for current measurement, Voltage measurement cables and connection accessories, Power adapter, Fluke carrying case, Manual and documentation, as shown in the photos. The device is used and shows signs of wear. The calibration sticker indicates calibration on 13.01.2025 and the next calibration date is 13.01.2026. This offer includes the entire set as shown in the photos.

Condition: used, DEWETRON High-End Power Analyzer DEWETRON DEWE3-PA8-RM / DEWE3-RM8 4-Phase Power Analyzer with TRION3-1810M-PA Up to 10 MS/s – modularly expandable 19" measuring system For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design with a built-in TRION3-1810M-PA power module and the connection and measuring accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM Chassis type plate: DEWE3-RM8 Revision: 1.1 Design: stationary rack-mount power analyzer TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measuring channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measuring range of the power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Power supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to the type plate: 500 W Made in Austria Sensor power supply: Integrated redundant sensor power supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Features: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current/measuring channels I1–I4 CNT1 / CNT2 TRIG DC AUX Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Integrated redundant sensor power supply Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing Hfedpfezyl Siox Ap Esn E-mobility / Automotive Power electronics Research and development Condition: Used Device can be switched on Optical condition according to pictures Dimensions 442 × 435 × 222 mm Weight: 15.8 kg Scope of delivery: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x installed TRION3-1810M-PA power module Measuring, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures The table or other items shown in the photos are not included in the sale unless explicitly mentioned. Shipping via UPS freight service is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Yokogawa WT5000 Precision Power Analyzer Yokogawa WT5000-HG-F High-precision power analyzer for electrical power measurements For sale is a used Precision Power Analyzer from Yokogawa Test & Measurement Corporation. The device is suitable for highly accurate power, voltage, current, and energy analysis in development, research, testing laboratories, power electronics, drive technology, and quality assurance. Technical Data Manufacturer: Yokogawa Type: WT5000-HG-F Device Type: Precision Power Analyzer Date of Manufacture: November 14, 2024 Serial No.: T11C17539 Equipment Name: Precision Power Analyzer Model: WT5000 Suffix: -HG-F Made in Korea Measuring Element: 760903 Current Sensor Element Voltage Input: 1000 V max. Sensor Power: ±15 V DC Configuration / Modules as shown in the pictures Connections / Interfaces: Ethernet USB 3.0 USB Front Connection GP-IB / IEEE 488 Video Out / XVGA BNC Connections Ext. Clock Analog / Pulse Inputs Power Connection: 100 - 120 V / 200 - 240 V AC 50 / 60 Hz 650 VA max. Dimensions (W × H × D): approx. 430 × 221 × 550 mm Weight: approx. 18 kg Features Large color display Touchscreen operation Front-side control buttons Multi-channel measurement system Pluggable measuring elements Current sensor element 760903 USB data interface Ethernet interface GP-IB interface Video output Power cable Accessories as shown in the pictures Applications Power measurement Energy analysis Electric motor testing Inverter testing Power electronics Battery and drive technology Automotive Research and development Testing laboratory Quality assurance Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer Power cable Accessories as shown in the pictures Condition Used Hedpozhl D Isfx Ap Eofn Optical condition as shown in the pictures The table or other items shown in the photos that are not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by phone.

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit Hedpfoz Exv Nex Ap Eefn :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software Hsdpfx Asz Nll Hsp Eofn CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D Hsdpfxez Snqls Ap Eofn • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Year of construction: 2025, condition: good (used), 2025 Bio-Techne / ProteinSimple Ella Automated Immunoassay Platform – Complete, Tested System For sale is a 2025 ProteinSimple Ella automated immunoassay analyzer, supplied as a complete setup with a Dell All-in-One PC, installed Simple Plex Runner software, and accessories. This is a 2025 system in very good cosmetic condition. The analyzer powers on normally, communicates correctly with the installed software, and has a documented history of internal self-tests. The available self-test results show: Overall Result: PASSED The internal diagnostics include checks of the power supply, USB communication, motion system, camera, pneumatics, heaters, focus, laser system, cartridge positioning, and verification cartridge response. System details - Year: 2025 - Manufacturer: Bio-Techne / ProteinSimple - ProteinSimple Simple Plex Runner v4.1.0.22 installed - Model: Ella - Serial number: 240501497 - Software: Simple Plex Runner - Software version: 4.1.0.22 - Firmware version: 2.0.3 - Self-test: PASSED - Self-test date: January 8, 2026 - IQ/OQ performed: May 23, 2025 Included: - 2025 ProteinSimple Ella Analyzer - Dell All-in-One PC - Simple Plex Runner software installed - Keyboard - Mouse - Barcode scanner - Ella Verification Cartridge with protective case - Connection cables and accessories as pictured Hfodpfx Apsz Ey Adj Esn - Protective transport packaging The system can be demonstrated prior to shipment or collection. Additional photographs and self-test documentation are available upon request. Worldwide shipping can be arranged.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 236 C 272, Laser cutting machine Prima Power Domino, Serial No. 236 C 272, Year of manufacture 2012 with - Laser source CX3000, Serial No. 110015, Year of manufacture 2011 - Control system Prima Electronics P20L-OI - Industrial cooling system Hyfra SVK320-1-S, Serial No. 11040530, Year of manufacture 2011 - Absorption dryer Boge The machine can be purchased via an online auction on our website, which is hosted by HPC. Hfodpfxez Nqh Ho Ap Een You can access the auction by clicking on the advertisement. Auction end date: October 19, 2026 to October 22, 2026.

Condition: used, Thermo Fisher Scientific ICP-OES Spectrometer / Elemental Analyzer Thermo Fisher Scientific iCAP 6300 Duo Professional ICP-OES Emission Spectrometer for laboratory, quality control, and research For sale is a used ICP-OES spectrometer from the manufacturer Thermo Fisher Scientific. The Thermo Scientific iCAP 6300 Duo is suitable for highly precise elemental analysis of liquid samples in laboratories, research, Hfedpfxszki Ipe Ap Een quality control, and industry. The Duo technology enables both axial and radial plasma observation and ensures high sensitivity as well as a large linear measurement range. Technical specifications: Manufacturer: Thermo Fisher Scientific Model: iCAP 6300 Duo Series: iCAP 6000 Part No.: 8423 100 63081 Measurement principle: ICP Optical Emission Spectrometry (ICP-OES) Optics: Echelle spectrometer with CID86 detector Wavelength range: 166–847 nm Spectral bandwidth: approx. 0.007 nm Supply voltage: 100–240 V AC, 50/60 Hz Power consumption: max. 4000 VA Dimensions (approx.): Width: 832 mm, Depth: 744 mm, Height: 589 mm Weight: approx. 85.5 kg Equipment: Duo plasma observation (axial/radial) Echelle optics CID86 detector Solid-state RF generator Peristaltic pump Optics flushing with nitrogen or argon iTEVA software Water-cooled system Accessories as shown in the pictures Application areas: Elemental analysis Environmental analysis Chemistry laboratory Pharmaceutical industry Metallurgical analysis Water analysis Quality control Research and development Universities Testing laboratory Scope of supply: Thermo Fisher Scientific iCAP 6300 Duo Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal wear and tear consistent with age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Thermo Fisher Scientific Optical Emission Spectrometer / Spark Spectrometer Thermo Scientific ARL 3460 Professional OES metal analysis system for the precise analysis of metallic materials For sale is a used optical emission spectrometer from the manufacturer Thermo Electron Corporation (now Thermo Fisher Scientific). The Thermo Scientific ARL 3460 is suitable for fast and highly precise analysis of metallic materials in laboratories, foundries, quality assurance, incoming goods inspection, as well as research and development. The system operates according to the principle of optical emission spectrometry (OES) and is supplied including an industrial PC, original software, and a USB license dongle. Technical data: Manufacturer: Thermo Electron Corporation Model: ARL 3460 Device type: Optical Emission Spectrometer (OES) Made in Switzerland Supply voltage: 230 V AC Mains frequency: 50 Hz Mains connection: 1 phase Power consumption: 3.5 kVA Software: Thermo WinOE Version 3.2.3 MP1 Gateway v1.0-90 ASLViewer v1.0-16 ASLEngine v1.2-1 Original USB license dongle included Measurement method: Optical Emission Spectrometry (OES) Spark excitation for material analysis Fast and highly precise metal analysis Analyzable elements (according to the installed spectrometer configuration): Copper (Cu) Chromium (Cr) Iron (Fe) Manganese (Mn) Uranium (U) Niobium (Nb) Titanium (Ti) Zirconium (Zr) Phosphorus (P) Sulfur (S) Boron (B) Arsenic (As) Tin (Sn) Carbon (C) Aluminum (Al) Calcium (Ca) Molybdenum (Mo) Equipment: Thermo Scientific ARL 3460 spectral analyzer Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Service markings present Accessories as shown in the pictures Application areas: Material analysis Metal analysis Quality assurance Incoming goods inspection Foundries Steel mills Metal processing Testing laboratory Research and development Hedpfx Apjzkufto Ejfn Automotive Mechanical engineering Industry Dimensions (approx.): Width: 1,665 mm, Depth: 910 mm, Height: 1,190 mm Weight: approx. 450 kg Scope of delivery: Thermo Scientific ARL 3460 Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear. Software starts correctly. Original USB license dongle included. Service and maintenance markings are present on the device. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Loading by forklift is possible. Delivery by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Oxford Instruments   Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – for spare parts / defective   Item Description:   For sale is a used X-ray Fluorescence Analyzer, type Oxford Instruments X-Strata 960. The unit comes from a laboratory decommissioning and is offered exclusively as a source of spare parts or for repair purposes. No functional testing has been performed – therefore, the unit is considered defective for the purposes of this sale.   Technical Data – Oxford Instruments X-Strata 960 (non-binding)   Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Hsdpfx Apjzdzifo Ejfn Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, material analysis, precious metal testing Measurement Geometry Top- or bottom-irradiating, depending on configuration Radiation Source X-ray tube (e.g., rhodium anode), 50–100 W power Detector Proportional counter or silicon drift detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material dependent) Spot Size approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized, adjustable up to approx. 230 mm measurement height Sample Chamber (W × D × H) approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on equipment) Focusing System Optical / laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Voltage Supply 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight approx. 150–200 kg (depending on version)   Condition: used / defective / for spare parts   Scope of Delivery: as shown in the images – without accessories or software   Important Notes:   Sold expressly as a defective unit without any warranty of functionality. The item is offered as a source of spare parts or for hobbyists. No warranty on function, completeness or technical parameters.   Commercial sale with exclusion of any liability for defects, in accordance with § 447 BGB (distance selling contract).   Scope of Delivery:   Oxford Instruments X-Strata 960 All components visible in the images Other parts, accessories or documentation are not included, unless explicitly stated.   Shipping & Pickup:   Pickup possible and preferred in Borken Shipping possible upon agreement.   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Hfsdpsy D Sqvefx Ap Esn Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 32,225 h, machine/vehicle number: 756 71 004, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Prima power, controller model: Nc Express / Tebis, laser type: CO₂ laser, laser source model: Prima power, laser hours: 9,996 h, laser power: 4,000 W, laser wavelength: 600 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input current: 62 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 10,000 mm, total width: 4,000 mm, total height: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Prima Power Domino LSR 2-3, a highly flexible and precise 5-axis 3D laser cutting machine, ideal for complex trimming and cutting of formed sheet metal components.Machine in good working condition, the machine is production today and will be available from 25/10 -2026 Hjdpfozg Hivex Ap Eofn

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Hfodpfx Aeziar Njp Een Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels Hfjdpfx Aexv A N Rjp Ejn 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Year of construction: 2025, fuel type: diesel, color: other, total length: 2,330 mm, total width: 2,120 mm, total height: 2,150 mm, Empty weight: 4.984 kg Fuel tank: 342 litres Peak current smoothing current generator Consisting of: - genset Engine: Yanmar Engine power: 38KVA Fuel: Diesel Environmental class: Tier4 final Adblue: no Fuel tank capacity: 342L - Battery: Technology: AGM lead carbon Usable capacity: 50KWh - Inverter: Hfjdjz Rlw Espfx Ap Ejn AC in: 400V (16A/32A/63A) AC out: 160KVA Pure sine wave Dynamic load control (generator-current network-solar panels) - note: Only usable on 60Hz network - Notes: Unused Manufacturer warranty: 1 year Technical specifications: see pictures Operation: on-grid and off-grid Remote access Parallel setup up to 880KVA possible via plug-and-play coupling overall dimensions: 2330x2125x2155mm net weight: 4984Kg List price: €165,000 ex vat Online auction of the P-Grid hybrid energy solution, which combines a Stage 5 diesel generator with batteries for peak shaving in construction and tower cranes and other industrial applications. Standard units are available for the European (50 Hz) and international (60 Hz) markets. The online auction opens Friday 9 October and closes Tuesday 27 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2025, fuel type: diesel, color: other, total length: 2,330 mm, total width: 2,120 mm, total height: 2,150 mm, Empty weight: 4.984 kg Fuel tank: 342 litres Peak current smoothing current generator Consisting of: - genset Engine: Yanmar Engine power: 38KVA Fuel: Diesel Environmental class: Tier4 final Adblue: no Fuel tank capacity: 342L - Battery: Technology: AGM lead carbon Usable capacity: 50KWh - Inverter: AC in: 400V (16A/32A/63A) AC out: 160KVA Pure sine wave Dynamic load control (generator-current network-solar panels) - note: Only usable on 60Hz network - Notes: Unused Manufacturer warranty: 1 year Technical specifications: see pictures Operation: on-grid and off-grid Hjdpfez Rlw Ssx Ap Eofn Remote access Parallel setup up to 880KVA possible via plug-and-play coupling overall dimensions: 2330x2125x2155mm net weight: 4984Kg List price: €165,000 ex vat Online auction of the P-Grid hybrid energy solution, which combines a Stage 5 diesel generator with batteries for peak shaving in construction and tower cranes and other industrial applications. Standard units are available for the European (50 Hz) and international (60 Hz) markets. The online auction opens Friday 9 October and closes Tuesday 27 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Hedpsy Efbkofx Ap Ejfn

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused Hodpfx Apjyt Emne Ejfn For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Year of construction: 2019, condition: good (used), Nilfisk Neptune 5-28 Industrial Power Washer The NEPTUNE 5 series features low running and maintenance costs, robustness, durability and high cleaning efficiency. Heating costs are reduced with the award-winning EcoPower boiler system with > 92% heating efficiency. Sound level is reduced thanks to the 1450 rpm motor. On board break tank with type AA airgap. Hfodeppa Imspfx Ap Een EcoPower boiler with > 92% efficiency Full ceramic piston pump Reduced running costs1450 rpm motor with low noise level Quick Service concept reduces maintenance costs Easy to use control panel, all controls on one place ERGO quick change accessory system for additional user comfort Make an enquiry

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, fuel: diesel, continuous power (apparent): 140 kVA, input frequency: 50 Hz, Emergency generator set Hfsdpfxjznh Rke Ap Eon Year of manufacture: 2024 – fully functional.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included Hfsdpfx Apsyxy D Ts Een - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: used, Year of construction: 2025, fuel type: diesel, color: other, total length: 2,330 mm, total width: 2,120 mm, total height: 2,150 mm, Empty weight: 4.984 kg Fuel tank: 342 litres Peak current smoothing current generator Consisting of: Hfodpfx Aoz Rlwrep Een - genset Engine: Yanmar Engine power: 38KVA Fuel: Diesel Environmental class: Stage V Adblue: no Fuel tank capacity: 342L - Battery: Technology: AGM lead carbon Usable capacity: 50KWh - Inverter: AC in: 400V (16A/32A/63A) AC out: 160KVA Pure sine wave Dynamic load control (generator-current network-solar panels) - Notes: Unused Manufacturer warranty: 1 year Technical specifications: see pictures Operation: on-grid and off-grid Remote access Parallel setup up to 880KVA possible via plug-and-play coupling Deployable on 50Hz network overall dimensions: 2330x2125x2155mm weight: 4984Kg List price: €165,000 ex vat Online auction of the P-Grid hybrid energy solution, which combines a Stage 5 diesel generator with batteries for peak shaving in construction and tower cranes and other industrial applications. Standard units are available for the European (50 Hz) and international (60 Hz) markets. The online auction opens Friday 9 October and closes Tuesday 27 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2025, fuel type: diesel, color: other, total length: 2,330 mm, total width: 2,120 mm, total height: 2,150 mm, Empty weight: 4.984 kg Fuel tank: 342 litres Peak current smoothing current generator Consisting of: - genset Engine: Yanmar Engine power: 38KVA Fuel: Diesel Environmental class: Stage V Adblue: no Fuel tank capacity: 342L - Battery: Technology: AGM lead carbon Usable capacity: 50KWh - Inverter: AC in: 400V (16A/32A/63A) AC out: 160KVA Pure sine wave Dynamic load control (generator-current network-solar panels) - Notes: Unused Manufacturer warranty: 1 year Technical specifications: see pictures Operation: on-grid and off-grid Remote access Parallel setup up to 880KVA possible via plug-and-play coupling Hsdez Rlwljpfx Ap Ejfn Deployable on 50Hz network overall dimensions: 2330x2125x2155mm weight: 4984Kg List price: €165,000 ex vat Online auction of the P-Grid hybrid energy solution, which combines a Stage 5 diesel generator with batteries for peak shaving in construction and tower cranes and other industrial applications. Standard units are available for the European (50 Hz) and international (60 Hz) markets. The online auction opens Friday 9 October and closes Tuesday 27 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.