Used Bach Ack-2D for sale (6,096)

Condition: used, Year of construction: 2006, CNC gantry cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Godpjw El Udjfx Aafsuf Work table: 1.5 x 6 m 2 oxy-fuel torches 3826

Condition: as good as new (ex-display), CNC ultra-high-pressure waterjet cutting system SAME / Bogacki - 2515 BA 2D - Demonstration machine - Travel ranges: 2,550 x 1,550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics and handwheel Includes high-pressure pump HB 50 Includes stainless steel work table (2,700 x 1,700 mm) Includes CE safety devices (light barriers) Includes splash guard (see images) Godpfogq Nqbjx Aafsuf Includes abrasive container (250 kg) Includes Allfi abrasive cutting head Includes red light laser Includes drilling unit with 4 mm diameter and ER 16 collet - Few operating hours

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH Godpswuutbefx Aafeuf and the control system is been repalced.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm stroke: max. 310 mm Gujdpfxsyylhao Aafof weight: 3.700 Kg.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. Gedpfxogwv S Ue Aafsuf daylight: max. 375 mm stroke: max. 275 mm weight: 4.500 Kg.

Condition: excellent (used), Year of construction: 1983, pressure 630 t Gusdpfx Ajxvdr Hoafjf diameter 320 mm stroke 310 mm weight of the machine ca. 3500 t

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. Gedpfsgtty Tsx Aafeuf 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Guedpfxowxw Amj Aafef Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Gsdpfx Ajul U Sveafouf Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Gsdewxw H Eepfx Aafeuf Clear gap: 450 mm Location: In Germany

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Gujdpfxshtaaqj Aafsf Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Gedshfwqzepfx Aafjuf Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Gsdpfx Aajwi Tdbefsuf Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm table size: 0/ 700 mm Location: In our warehouse

Condition: used, maximum load weight: 9,900 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 08/2007, loading space length: 7,200 mm, total width: 2,500 mm, total height: 1,250 mm, Equipment: ABS, * Ackermann AAF 12 drawbar trailer for ATL swap bodies - high-coupled with 40 mm eyelet - * Air suspension - MB axles - disc brakes - Tyres: 315/60 R 22.5 - * Overall length: 8,900 mm - Width: 2,500 mm - Height: 1,250 mm * Gross vehicle weight: 12,600 kg - Unladen weight: 2,700 kg - Payload: 9,900 kg * German vehicle - German registration certificate - immediately available - * Viewing by appointment only Godpfxoxuchwj Aafjuf * Contact: Mr. Andreas Vogel * The information provided online is non-binding descriptions. * They do not constitute guaranteed characteristics. * The seller accepts no liability for typing or data transmission errors. * Subject to change, errors, and prior sale.

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Godpfxof Ncado Aafeuf Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: good (used), Introma ZD-2D Wire Stitcher Machine in very good condition, recently serviced. Gsdozt H Ncjpfx Aafjuf Technical specifications: Capacity: 180/min Maximum stitching thickness: 25mm Wire diameter: max. 1mm Power supply: 380V Weight: 230kg The machine features an adjustable table for block and booklet stitching. Front margin. Instructions included.

Condition: new, functionality: fully functional, Year of construction: 2025, power: 60 kW (81.58 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Laser source – MAX Photonics Table size – 4000x2000 mm Control system – FSCUT 6000 Software – Cypnest + Cypcut Water chiller – Hanli Model: GR 4020 Power: 60,000 W Laser source: MAX Photonics Table size Straight cut: 4100 x 2450 mm Bevel cut: 3750 x 1800 mm Control system Straight cut: FSCUT 8000 Bevel cut: FSCUT 9100 Software: Cypnest + Cypcut Laser head: Boci BLT6/BLT4 Nitrogen proportional valve: SMC Water chiller: Hanli Power stabilizer: 400 kVA Load capacity: Up to 5,000 kg Gsdpfxsw Ix Dcj Aafouf Laser power: 60,000 W X/Y positioning accuracy: ±0.1 mm/m X/Y repeat positioning accuracy: ±0.05 mm/m Maximum travel speed: 80 m/min Maximum acceleration: 0.8 G CNC control: EtherCAT-BUS Power supply: 380V 50Hz three-phase Servo motor power: X: 1.8 kW; Y: 5.5 kW*2; Z: 0.75 kW Power protection: Protection class IP54 External dimensions: 9700 x 4900 x 2350 mm Total machine weight: 12,500 kg Power consumption: 12kW: 78.25 kW/120 kVA 20kW: 112.25 kW/180 kVA Machine frame: welded steel Gantry crane: welded steel

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Gsdozizkyepfx Aafeuf Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Fan is used in: • Dedusting installations Godpfx Aeyuqr Ejafjuf • Extraction systems • Ventilation systems • Wood and metalworking industries • Air transport systems Technical data • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (telephone: [please insert number]). Westtech Woodcracker C300 Felling Grapple / incl. Collector Grapple / incl. ALBACH Quick Coupler / BRAND NEW unit / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening width (mm): 1,430 - Shear opening width (mm): 550 - Own weight (basic – fully equipped) (kg): 750 – 1,080 - Recommended flow rate main circuit (l/min): 70 – 150 - Recommended flow rate auxiliary circuit (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle service weight (t): 12 – 18 Equipment features: - incl. Autospeed function - incl. collector grapple - incl. hydraulic changeover between collector grapple and cutting unit (Sennebogen single circuit system) Godpfx Aaoy E Et Tsfeuf - incl. ALBACH quick coupler We stock numerous adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) which are immediately available. At our warehouse, we offer a very large selection of various Westtech products, all available for immediate delivery! Mr. Herden (Tel. [please insert number]) will be happy to assist you. Financing options available upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction equipment - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale reserved. = Additional information = New: Yes Part suited for: Forestry applications For further information, please contact Marius Herden.

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker C300 Felling Grapple / incl. ALBACH quick coupler / BRAND NEW / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening (mm): 1,430 - Shear opening (mm): 550 - Own weight (basic version – full equipment) (kg): 750 – 1,080 - Recommended main circuit flow rate (l/min): 70 – 150 - Recommended auxiliary flow rate (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle operating weight (t): 12 – 18 Specification: - incl. Autospeed function - incl. ALBACH quick coupler We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and readily available. In our warehouse we offer a wide selection of Westtech products that are immediately available! Mr. Herden (Tel. ...) will gladly assist you. On request, we are happy to provide you with a financing offer. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS Guedpfeyxkq Dsx Aafjf - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Furthermore, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker product range for you! Subject to change and prior sale. = More Information = New: Yes Net weight: 850 kg Suitable for: Forestry applications Contact Marius Herden for further information.

Year of construction: 2022, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Westtech Woodcracker CL320 Felling Grapple / in stock & immediately available / Year of manufacture: 2022 / DEMO unit / like new Price: €8,890.00 net / €10,579.10 gross Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended main circuit oil flow (l/min): 70 – 150 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 45 – 60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 12 – 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. Our warehouse holds a wide selection of various Westtech products, all immediately available! Mr. Herden will be happy to assist you (by phone). Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Gujdpfxeyix N Uo Aafsf With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal ref. no.: 121059-F = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: ready for operation (used), Schmalenberger ZHT02 32-08/2 (50Hz) SN: 2018005883/20 with ATB CNF 90L/2D-11S+E3 / 1710 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gjdpfx Aajzpcwusfouf

Condition: used, Manufacturer: FAM Model: FV-2D Year: 2002 Condition: Used Serial Number: 5488 Stock Number: 3371 Knife speed: 450 RPM Knife set: grater Infeed height: 1550 mm Gujdpfx Aey Nlwmeafjf Outfeed height: 600 mm Power: 3 x 380V, 50Hz, 2.2kW Dimensions: 1400 x 800 x 1550 mm Weight: 260 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Lenze, series 8600 -Type: 8603_E.2D.20 -Input: D 400 Gusdsfuw Ntopfx Aafef -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg